Application Solutions
SPECIFICATIONS
Loudspeaker Type: 2-way, horn loaded coaxial, weather-resistant
Operating Range:
Max Input Ratings: 200W, 70V/100V
Recommended Power
Amplifier:
Sensitivity (1W/1m):
Maximum Output on
200W Tap:
200W Nominal
Impedance:
200W Minimum
Impedance:
Nominal –6dB
Beamwidth:
Axial Q / DI: 18.1 / 12.6, 1.6 kHz to 10 kHz
Crossover Frequency: 2 kHz
Recommended Signal
Processing:
Drivers:
Driver Protection: DYNA-TECH
Input Connection: 12 foot (4 m) SJOW #16 gauge
Controls:
Enclosure: Rotomolded LLDPE, light grey
Mounting/Rigging
Provisions:
Environmental
Performance:
Required Accessories: 24 dB/Oct high pass filter
Supplied Accessories:
Optional Accessories: PMB Series pole mount brackets
Dimensions—Height:
Width:
Depth:
Weight: 37 lbs (16.8 kg)
Shipping Weight: 42 lbs (19.1 kg)
NOTES:
1. Sensitivity: Free field pink noise measurement at 40 ft (12.2 m) at 60%
power; extrapolated to 1 meter and an input of 2.83 volts RMS.
2. Watts: All wattage figures are calculated using the rated nominal impedance.
85 Hz to 16 kHz
125 Hz to 10 kHz (±4 dB)
25W to 200W @ 70 Volts
50W to 200W @ 100 Volts
100 dB SPL (125 Hz to 10 kHz 1/3 octave bands)
101 dB SPL (250 Hz to 4 kHz speech range)
123 dB SPL
25 ohms
16.4 ohms @ 8.7 kHz
90° H (+1° / -46°, 1.6 kHz to 12.5 kHz)
40° V (+16° / +1°, 1.6 kHz to 12.5 kHz)
90 Hz high pass filter
LF (1) 12” Ferrofluid-cooled
HF (1) 1” exit, titanium free, Ferrofluid-cooled
4 position autoformer TAP select switch
70V switchable taps @ 200W, 100W, 50W, 25W
100V switchable taps @ 200W, 100W, 50W
(5) 3/8-16 rigging points
3-layer WeatherStop™, light grey
(Zinc-rich epoxy dual-layer powder coated
Grille:
perforated steel grille, foam, woven poly mesh)
IEC529 IP55W rating with a minimum 5-degree
downward aiming angle
(1) Yoke bracket, light grey
(1) Aiming strap
16 inches (406.4 mm)
16 inches (406.4 mm)
15.94 inches (404.88 mm)
R.5-94TZ
2-WAY HORN LOADED WEATHER-RESISTANT
FULL-RANGE 200W (70V/100V) LOUDSPEAKER
APPLICATIONS
• Fill speaker for stadia, athletic fields, arenas and
race tracks
• Convention centers
• Outdoor background music / paging systems
• Theme and amusement parks
• Fairgrounds, rodeos, air shows
• Malls, cruise ships, skating rinks
• Swimming pools
• Portable sound systems
FEATURES
• Weather-resistant, rotomolded UV enclosure
• Weather-treated drivers and crossovers
• Corrosion-resistant zinc-rich epoxy dual-layer
powder coated steel grille and yoke
• Pattern control down to 630 Hz
• High efficiency
• Integral mounting points
• High power passive crossover
• DYNA-TECH protection circuitry
• Multi-tap 200W autoformer for 70V and 100V
inputs
DESCRIPTION
The R.5-94TZ two-way, full-range loudspeaker
system is engineered to provide quality full-range
sound projection in a variety of outdoor and indo or
applications. Its wide range, smooth frequency
response and high efficiency ensure both high
fidelity music reproduction and superb projection
of clear intelligible speech with very low distortion.
An input autoformer with switchable taps provides
impedance matching to 70V or 100V lines. Fiveyear limited product warranty; fifteen-year
enclosure warranty.
Community Professional Loudspeakers, 333 East Fifth Street, Chester, PA 19013-4511 USA
610-876-3400 · Fax 610-874-0190 · info@communitypro.com · www.communitypro.com
R.5-94TZ
W
W
W
True to Specification
FREQUENCY RESPONSE 200W IMPEDANCE
2-WAY HORN LOADED WEATHER-RESISTANT
FULL-RANGE 200W (70V/100V) LOUDSPEAKER
120
110
100
90
dB SPL
80
70
10 100 1,000 10,000
40 Hz Resolution, 1/8 octave smoothing
Frequency in Hertz
80
70
60
50
40
Ohms
30
20
10
0
10 100 1,000 10,000
Min Z 30 Hz - 20000 Hz = 16.2 Ohms @ 8620 Hz
Frequency in Hertz
BEAMWIDTH AXIAL Q
1000
100
Degrees
10
100 1,000 10,000
Horizontal Vertical
Frequency in Hertz
100
Q
10
1
100 1,000 10,000
Frequency in Hertz
DIMENSIONS
R.5 YOKE
15.94"
(404.88mm)
16"
(406.4mm)
16.000" [406.4]
.197" [5]
16"
10.197" [259]
(TYP)
10.0” [254]
(406.4mm)
SIDE VIE
FRONT VIE
REAR VIE
2.000" [50.8]
1.000" [25.4]
16.394" [416.4]
4.625"
[117.48]
8.197" [208.2]
2.750" [69.85]
ARCHITECTURAL SPECIFICATIONS
The loudspeaker system shall be a horn-loaded, two-way, coaxial desi gn consisti ng of one 12" F errofluid-coo led driver and one
1" exit, titanium free, Ferrofluid-cooled compression driver mounted on a horn inside the cabinet. The drivers shall be
connected to a passive crossover network with a crossover frequency at 2 kHz with driver protection using DYNA-TECH
protection circuitry. The cabinet shall be a rotomolded linear low density polyethylene enclosure providing weather and UV
resistance with a three-layer weather resistant grille. The steel grille shal l be powder coated with a proprietary zinc-rich epoxy
dual-layer powder coating process in light grey to color match the enclosure. The system shall have an IEC529 IP rating of
IP55W with a minimum 5-degree downward aiming angle. The input connection sh all be one 12' (4m ) SJOW #16 gauge cable
with stripped ends. The enclosure shall incorporate five 3/8-16 rigging p oints for multiple mounting options. In addition, the
loudspeaker will be supplied with one zinc-rich epoxy dual-layer powder coated steel yoke bracket and one multi-tap
autoformer for 70V and 100V inputs. The loudspeaker system shall have an amplitude response of 125Hz to 10 kHz (+/- 4 dB
SPL), an input capacity of 200W (70V/100V), 101 dB SPL sensitivity @ 2.83V / 1 meter bet ween 250 Hz to 4 kHz at a nomina l
8 ohm impedance. The nominal dispersion shall be 90º x 40º over a freq uency range of 1.6 kHz to 12.5 kHz. The dimensions
of the enclosure are defined as 16" x 16" x 16" (HWD) at a weight of 37 lbs.
Community strives to improve its products on a continual basis. Specifications are therefore subject to change without notice.
communitypro.com
R.5-94TZ [30NOV2009]
Innovative design. Legendary sound.
Loading...