I SERIES
Compact 600
IC6-2082/96
HIGH OUTPUT DUAL 8-INCH TWO-WAY
90° x 60° INSTALLATION LOUDSPEAKER
FEATURES
• Engineered for demanding high output, high performance applications
• Exceptional fidelity with elegant I SERIES aesthetics
• Large, field-rotatable HF horn and LF pattern control technology for wide, consistent coverage
• Low impedance (16 ohm) or 70V/100V models avail able
• Low profile U-Bracket or Vertical Yoke available, compatible with most third part y wall and ceiling brackets
22.46"
(571mm)
with grille o
APPLICATIONS
MAIN PA or D ISTRI BUTED
Restaurants · Presentation Suites · Auditoriums
Retail Spaces · Smaller Houses of Worship · Stadiums
Theme Parks · Cruise Ships · Entrance Halls
FILL or DELAY
Houses of Worship · Auditoriums · Arenas · Stadiums
Theaters · Themed Entertainment · Under Balcony
Stage Lip Fill
DESCRIPTION
I SERIES Compact 600 loudspeakers provide
excellent acoustic performance, flexibility and
elegant aesthetic s for a diverse range of applications
in today's per formance venues. Desig ned to suppor t
the goals of systems integrators and consultants in
need of very compact loudspeakers with exceptional
near field fidelity for foreground or background music
applications and articulate voice projection with
very high output capabilities for fill and distributed
applications. I SERIES Compact loudspeakers are
engineered to be used alone or integrated into
arrays along with I SERIES Point Source (IP) or
Subwoofer (IS) models using the comprehensive
selec tion of available BalancePoint™ Flyware
modular array brackets.
The IC6 -2082/96 is designed for demanding
ext ended high ou tput, high p erform ance applic ations
without sacrificing fidelity or coverage consistency.
Most s ymmetric al dual 8" 2-way loudspeakers su er
from serious coverage inconsistencies through
the crossover region. The IC6-2082 /96 solves this
problem by using a very high quality, low distortion
1.7" diaphragm neodymium HF compression driver
on a large field-rotatable horn that is crossed over
to par tially baed 8" LF drivers at an unusually low
crossover frequency. The combination of baes
and low crossover point allows the IC6-2082/96 to
per form simi larly to a c oaxial l oudspe aker, resulti ng in
a consis tent, s ymmetr ical, and w ide cover age patt ern
through its operating range. The long e xcursion LF
drivers and low velocity port eortlessly extend LF
performa nce at any output level. Ad ditionally, 16 ohm
or 70V/100V models expand application flexibility
both indoors and out . Multiple at tachment points
provide compatibility with a variety of Community
and third party mounting brackets.
TECHNICAL SPECIFICATIONS1
Operating Mode
Operating Environment
Operating Range
Nominal Beamwidth (H x V)
Transducers
Continuous Power Handling3
@ Nominal Impedance
Autoformer Taps/Impedance
IC6-2082T96 | IC6-2082WT96
Nominal Sensitivity
Nominal Maximum SPL
(Whole Space)
Equalized Sensitivity6
Equalized Maximum SPL7
Recommended Amplifiers
PHYSICAL
Input Connection
Mounting Points
Environmental
Weight
IC6-2082/96 | IC6-2082WR96
IC6-2082T96 | IC6-2082WT96
Dimensions H x W x D
Finish
OPTIONS
Accessories
Configure-to-Order (CTO)
*Rated continuous maximum input voltage at passive loudspeaker input may be higher than for directly connected transducers due to losses in the passive
crossover. Voltages applied to the transducer terminals through the passive crossover shall always be the same or lower than the rated continuous voltage
for each device.
Commu nity str ives to impro ve its products on a cont inual basis . Specifica tions are th erefore sub ject to chan ge without n otice.
Low Impedance or 70V/100V models
Indoor or Weather-Resistant Outdoor
2
4
5
50 Hz to 19.5 kHz
90° x 60°, rot atabl e w avegui de
LF 2 x 8" (203mm) ferrite driver, 1.5" (37mm) voice coil
HF 1 x 1" (25mm) exit, 1.7" (44mm) voice coil, ketone polymer
diaphragm, neodymium compression driver
Passive* 69V 300W @ 16 ohms (1200W peak)
70V
200W
100W
50W
25W
@ 1W/1m
100 dB
Peak
131 dB
@ 1W/1m
99 dB
Peak
130 dB
300W - 600W @ 16 ohms, (69V - 98V)
(1) Screw terminal block (5-position)
(9) M10 threaded inserts; (4) M8 threaded inserts (rear)
Outdoor: IP55 W per IEC 60529, MIL-STD-810G
Indoor
31 lbs (14.1 kg) loudspeaker
35 lbs (15.9 kg) loudspeaker
11.30" x 22.46" x 10.62" (287 x 571 x 270 mm)
Refer to the Technical Drawing
IUB2082 U-Bracket / IV Y2082 Vertical Yoke - color matched to cabinet
Various third part y wall , ceiling and pan/tilt mounts (refer to
IC6 IUB/IVY manual for models)
Custom color; factory-rotated horns for vertical cabinet orientation;
custom cable length for weather-resistant models
@ 70.7V
25 Ω
50 Ω
100 Ω
200 Ω
@ 2.83V
97 dB
Continuous
125 dB
@ 2.83V
96 dB
Continuous
124 dB
100V
200W
100W
50W
Weather-Resistant
23.9 lbs (10.8 kg) loudspeaker
27.9 lbs (12.7 kg) loudspeaker
@ 100V
50 Ω
100 Ω
200 Ω
I SERIES Compact 600
Off-Axis Vertical (up)
Half Space Mag [dB] (0°) Mag [dB] (10°)
Mag [dB] (20°) Mag [dB] (30°) Mag [dB] (40°)
Off-Axis Horizontal
Series1 Mag [dB] (0°) Mag [dB] (15°)
Mag [dB] (30°) Mag [dB] (45°) Mag [dB] (60°)
Off-Axis Vertical (down)
Half Space Mag [dB] (0°) Mag [dB] (10°)
Mag [dB] (20°) Mag [dB] (30°) Mag [dB] (40°)
Beamwidth (Degrees)
BeamH BeamV
HalfSpace_Proc System_Proc
Directivity Index
Impedance
MinZ100Hz‐ 16000Hz=12.7Ohms@1580Hz
IC6-2082/96
HIGH OUTPUT DUAL 8-INCH TWO-WAY
90° x 60° INSTALLATION LOUDSPEAKER
Factory Standard
Landscape Orientation
AXIAL PROCESSED RESPONSE (dB)
Half-Space Full Range
110
100
90
80
70
20
AXIAL SENSITIVITY (dB SPL)
Half-Space Passive
110
100
90
80
70
20
100
100
Frequency (Hz)
9
Frequency (Hz)
8
1000
1000
10000
10000
HORIZONTAL OFF-AXIS RESPONSE (dB)
Half-Space 0° 15° 30° 45° 60°
110
100
90
80
70
20
100
Frequency (Hz)
1000
VERTICAL OFF-AXIS UP RESPONSE (dB)
Half-Space 0° 10° 20° 30° 40°
110
100
90
80
70
20
100
Frequency (Hz)
1000
10
10000
10
10000
IMPEDANCE (Ohms)
Passive
100
10
1
20 100
Minimum Impedance: 12.7 ohms @ 1580 Hz
DIRECTIVITY INDEX (dB)
40
30
20
10
0
20 100
Frequency (Hz)
11
Frequency (Hz)
1000
1000
10000
10000
VERTICAL OFF-AXIS DOWN RESPONSE (dB)
Half-Space 0° 10° 20° 30° 40°
110
100
90
80
70
20
BEAMWIDTH (Degrees)
Horizontal Vertical
360
100
10
20
100
100
Frequency (Hz)
1000
12
1000 10000
Frequency (Hz)
10
10000
I SERIES Compact 600
Off-Axis Horizontal (Lft)
Half Space Mag [dB] (0°) Mag [dB] (15°)
Mag [dB] ( 30°) Mag [dB] (45°) Mag [dB] (60°)
Off-Axis Vertical
Series1 Mag [dB] ( 0°) Mag [dB] (10°)
Mag [dB] ( 20°) Mag [dB] (30° ) Mag [dB] (40°)
Off-Axis Horizontal (Rt)
Half Space Mag [dB] (0°) Mag [dB] (15°)
Mag [dB] (30°) Mag [dB] (45°) Mag [dB] (60°)
Beamwidth (Degrees)
BeamH BeamV
HalfSpace_Proc System_Proc
Directivity Index
Impedance
MinZ100Hz‐ 16000Hz=12.7Ohms@1580Hz
IC6-2082/96
HIGH OUTPUT DUAL 8-INCH TWO-WAY
90° x 60° INSTALLATION LOUDSPEAKER
Portrait Orientation
AXIAL PROCESSED RESPONSE (dB)
Half-Space Full Range
110
100
90
80
70
20
AXIAL SENSITIVITY (dB SPL)
Half-Space
110
100
90
80
70
20
100
Passive
100
Frequency (Hz)
9
Frequency (Hz)
8
1000
1000
10000
10000
VERTICAL OFF-AXIS RESPONSE (dB)
Half-Space 0° 10° 20° 30° 40°
110
100
90
80
70
20
100
Frequency (Hz)
10
1000
HORIZONTAL OFF-AXIS LEFT RESPONSE (dB)
Half-Space 0° 15° 30° 45° 60°
110
100
90
80
70
20
100
Frequency (Hz)
1000
10000
10
10000
IMPEDANCE (Ohms)
Passive
100
10
1
20 100
Minimum Impedance: 12.7 ohms @ 230 Hz
DIRECTIVITY INDEX (dB)
40
30
20
10
0
20 100
Frequency (Hz)
11
Frequency (Hz)
1000
1000
10000
10000
HORIZONTAL OFF-AXIS RIGHT RESPONSE (dB)
Half-Space 0° 15° 30° 45° 60°
110
100
90
80
70
20
BEAMWIDTH (Degrees)
Horizontal Vertical
360
100
10
20
100
100
Frequency (Hz)
1000
12
1000 10000
Frequency (Hz)
10
10000
I SERIES Compact 600
HIGH OUTPUT DUAL 8-INCH TWO-WAY
IC6-2082/96
90° x 60° LANDSCAPE CABINET 90° x 60° PORTRAIT CABINET
135°
90° lef t
-6
— 100 Hz
— 125 Hz
45°
— 160 Hz
— 200 Hz
90° x 60° INSTALLATION LOUDSPEAKER
90° lef t
135°
— 250 Hz
— 315 Hz
45°
— 400 Hz
— 500 Hz
135°
90° lef t
(30dB Scale, 6dB per major division)
— 100 Hz
— 125 Hz
45°
— 160 Hz
— 200 Hz
135°
90° lef t
45°
— 250 Hz
— 315 Hz
— 400 Hz
— 500 Hz
-45°
45°
-45°
45°
-45°
0°
front
— 1600 Hz
— 2000 Hz
— 2500 Hz
— 3150 Hz
0°
front
— 10000 Hz
— 12500 Hz
— 16000 Hz
0°
front
180°
back
180°
back
180°
back
-135°
-135°
135°
-135°
135°
-90° right
90° lef t
-90° right
90° lef t
-90° right
-45°
-45°
-45°
45°
45°
0°
front
— 630 Hz
— 800 Hz
— 1000 Hz
— 1250 Hz
0°
front
— 4000 Hz
— 5000 Hz
— 6300 Hz
— 8000 Hz
0°
front
180°
back
180°
back
180°
back
-135°
135°
-135°
135°
-135°
-90° right
90° lef t
-90° right
90° lef t
-90° right
-45°
-45°
45°
-45°
45°
0°
front
— 1600 Hz
— 2000 Hz
— 2500 Hz
— 3150 Hz
0°
front
— 10000 Hz
— 12500 Hz
— 16000 Hz
0°
front
180°
back
180°
back
180°
back
-135°
-90° right
90° lef t
135°
-135°
-90° right
90° lef t
135°
-135°
-90° right
-45°
45°
-45°
45°
-45°
0°
front
— 630 Hz
— 800 Hz
— 1000 Hz
— 1250 Hz
0°
front
— 4000 Hz
— 5000 Hz
— 6300 Hz
— 8000 Hz
0°
front
180°
back
-135°
-90° right
90° lef t
135°
180°
back
-135°
-90° right
HORIZONTAL POLAR DATA
135°
180°
back
-135°
90° lef t
-90° right
90° up
135°
180°
back
-135°
135°
180°
back
-135°
VERTICAL POLAR DATA
135°
180°
back
-6
-90° dow n
90° up
-90° dow n
90° up
45°
-45°
-45°
45°
45°
— 100 Hz
— 125 Hz
— 160 Hz
— 200 Hz
0°
front
— 630 Hz
— 800 Hz
— 1000 Hz
— 1250 Hz
0°
front
— 4000 Hz
— 5000 Hz
— 6300 Hz
— 8000 Hz
0°
front
180°
back
180°
back
180°
back
135°
-135°
135°
-135°
135°
90° up
-90° dow n
90° up
-90° dow n
90° up
45°
-45°
45°
-45°
45°
— 250 Hz
— 315 Hz
— 400 Hz
— 500 Hz
0°
front
— 1600 Hz
— 2000 Hz
— 2500 Hz
— 3150 Hz
0°
front
— 10000 Hz
— 12500 Hz
— 16000 Hz
0°
front
180°
back
180°
back
180°
back
135°
-135°
135°
-135°
135°
90° up
-6
-90° dow n
90° up
-90° dow n
90° up
-45°
-45°
45°
45°
45°
— 100 Hz
— 125 Hz
— 160 Hz
— 200 Hz
0°
front
— 630 Hz
— 800 Hz
— 1000 Hz
— 1250 Hz
0°
front
— 4000 Hz
— 5000 Hz
— 6300 Hz
— 8000 Hz
0°
front
180°
back
180°
back
180°
back
135°
-135°
135°
-135°
135°
90° up
-90° dow n
90° up
-90° dow n
90° up
45°
-45°
45°
-45°
45°
— 250 Hz
— 315 Hz
— 400 Hz
— 500 Hz
0°
front
— 1600 Hz
— 2000 Hz
— 2500 Hz
— 3150 Hz
0°
front
— 10000 Hz
— 12500 Hz
— 16000 Hz
0°
front
-135°
-90° dow n
-45°
-135°
-90° dow n
-45°
-135°
-90° dow n
-45°
-135°
-45°
-90° dow n
C
D
3
4
5
I SERIES Compact 600
IC6-2082/96
HIGH OUTPUT DUAL 8-INCH TWO-WAY
90° x 60° INSTALLATION LOUDSPEAKER
Outdoor Models:
Grille: Marine grade aluminum with zinc-rich dual-
layer powder-coat, featuring hydrophobic treatment on
acoustically transparent woven black fabric backing.
Enclosure / Finish: 15mm PolyGlas™, Grey (RAL#7038),
heavily textured industrial-grade exterior-rated coating.
EE
2.75" [69.8]
7.73" [196.3]
2.50" [63.5]
INPUT
B
www.communitypro.com
TEL: (61 0)876-3400 FA X:(610)874-0190
COMMUNITY PROFESSIONA L LOUDSPEAKERS
333 E FIFTH ST. CH ESTER, PA 19013-4511 USA
DRAWINGTITLE
A
0
REV
1 OF 1NONE
SHEET
I SERIES IC6-2082/96
IC6-2082-96-2D
SCALE
DWG NO.
1234567
THIS DRAWI NG HAS BEEN FUR NISHED BY COMMU NITY LIGHT & SOUND, INC.
DRAWING RE PRODUCED WITHOU T THE WRITTEN P ERMISSION OF CO MMUNITY.
ALL REPROD UCTIONS WHOLE O R IN PART, INCL UDING VENDOR'S SHOP
DRAWINGS S HALL BEAR OR RE FER TO THIS STAMP.
THE INFORM ATION AND KNOW- HOW THEREON MAY NOT BE USED NOR THE
BACK
5.00" [127.0]
5.45" [138.4]
1.38" [35.0] 19.70" [500.5]
3.25" [82.6]
3.32" [84.4]
METRIC: ±0.5mm
UNLESS OTH ERWISE NOTEDTO BE:
TO BE SY MMETRICAL
ANGLES: ±.5° DECIMALS: ±.03"
DIMENSION S ACROSS CENTERLINES
TOLERANCES ON ALL DIMENSIONS
DO NOT SCALE DRAWING
TSC = THEORETICAL SHARPCORNER
ALL DIME NSIONS IN in/mmU.O.S.
THIRD ANG LE PROJECTION
TSC
5.81" [147.6]
10.62" [269.8]
5.16" [131] NOT TO SCALE
1.38" [35.0]
REVISIONS
DESCRIPTION
REV DATE
80°
SIDES
Indoor Models:
Grille: Powder-coated perforated steel backed with
color-matched acoustically transparent woven fabric.
Black (RAL#9005) or White (RAL#9003)
Enclosure / Finish: Black (RAL#9005) or White
(RAL#9003) low gloss, uniformly textured painted
15mm Baltic Birch plywood.
3.78" [96.0]
22.46" [570.5]
FRONT
GRILLE PARTIALLY
SHOWN
11.23" [285.2]
TOP/BOTTOM
5.16" [131.0]
H x W x D
11.30" x 22.46" x 10.62"
(287 x 571 x 270 mm)
Unit Weight
31 lbs (14.1 kg) IC6-2082/26 loudspeaker
35 lbs (15.9 kg) IC6-2082T26 loudspeaker
Shipping Weight
35.6 lbs (16.1 kg) IC6-2082/96 loudspeaker
39.6 lbs (18.0 kg) IC6-2082T96 loudspeaker
11.23" [285.2]
11.30" [286.9] CL CL
LOUDSPEAKER ONLY: 31LBS. (14.1KG).
POINT, M8 THREADED HOLE.
NOTES:
D
C
B
POINT, M10 THREADED HOLE.
1. SYMBOL INDICATES COG.
2. SYMBOL INDICATES MOUNTING
4. WEIGHT:
3. SYMBOL INDICATES MOUNTING
A
On the WR/WT models the input connection diers and the units weigh less than their respective indoor models
*Note: The transformer and outdoor model drawings are available at communitypro.com
TECHNICAL DRAWING / DIMENSIONS / FINISH
I SERIES
Label# 113799
I SERIES Compact 600
Autoformer 200W
Revised 6/1/2016
Compact 600
IC6-2082/96
HIGH OUTPUT DUAL 8-INCH TWO-WAY
90° x 60° INSTALLATION LOUDSPEAKER
CONNECTION DIAGRAMS
+/–
Passive
DSP
Amp
Input
+/–
Passive
Thru
Two-way passive
NC
+ – + –
PASSIVE
INPUT
I SERIES
Low Impedance Input Panel (Indoor)
NOTES
1. PERFORMANCE SPECIFICATIONS All measurements
are taken indoor using a time-windowed and processed
signal to eliminate room eects, approximating an
anechoic environment, a distance of 6.0 m. All acoustic
specifications are rounded to the nearest whole number.
An external DSP with settings provided by Community
Professional Loudspeakers is required to achieve the
specified performance; further performance gains can
be realized using Community’s dSPEC226 loudspeaker
processor with FIR power response optimization.
2. OPERATING RANGE The frequency range in which the
on-axis processed response remains within 10dB of the
average SPL.
3. CONTINUOUS POWER HANDLING Maximum continuous
input voltage (and the equivalent power rating, in watts,
at the stated nominal impedance) that the system can
withstand, without damage, for a period of 2 hours using
an EIA-426-B defined spectrum; with recommended signal
processing and protection filters.
4. NOMINAL SENSITIVITY Averaged SPL over the operating
range with an input voltage that would produce 1 Watt
at the nominal impedance and the averaged SPL over
the operating range with a fixed input voltage of 2.83V,
respectively; swept sine wave axial measurements with
no external processing applied in whole space, except
where indicated.
Crossover
HF
LF x2
Made in the USA
PASSIVE
THRU
Community Light & Sound, Inc.
333 East Fifth Street, Chester, PA 19013 USA
70V / 100V Input Panel (Indoor)
5. NOMINAL MAXIMUM SPL Calculated based on nominal
/ peak power handling, respectively, and nominal
sensitivity; exclusive of power compression.
6. EQUALIZED SENSITIVITY The respective SPL levels
produced when an EIA-426-B signal is applied to the
equalized loudspeaker system at a level which produces
a total power of 1 Watt , in sum, to the loudspeaker
subsections and also at a level which produces a total
voltage, in sum, of 2.83V to the loudspeaker subsections,
respectively; each referenced to a distance of 1 meter.
7. EQUALIZED MAXIMUM SPL The SPL produced when an
EIA-426-B signal is applied to the equalized loudspeaker
system, at a level which drives at least one subsection to
its rated continuous input voltage limit, referenced to a
distance of 1 meter. The peak SPL represents the 2:1 (6dB)
crest factor of the EIA-426-B test signal.
8. AXIAL PROCESSED RESPONSE The on-axis variation
in acoustic output level with frequency of the complete
loudspeaker system with recommended signal processing
applied. 1/6 octave Gaussian smoothing applied.
9. AXIAL SENSITIVITY The on-axis variation in acoustic
output level with frequency for a 1 Watt swept sine
wave, referenced to 1 meter with no signal processing.
1/6 octave Gaussian smoothing applied.
WEATHER-RESISTANT INPUT CABLE
WHITE
BLACK
Low Impedance
RED
YELLOW
ORANGE
BROWN
BLACK
70V/100V
10. HORIZONTAL / VERTICAL OFF-AXIS RESPONSES The
loudspeaker’s magnitude response at various angles
o-axis, with recommended signal processing applied in
the operating mode which utilizes the largest number of
individually amplified pass bands. 1/6 octave Gaussian
smoothing applied.
11. DIRECTIVITY INDEX The ratio of the on-axis SPL
squared to the mean squared SPL at the same distance
for all points within the measurement sphere for each
given frequency; expressed in dB. 1/6 octave Gaussian
smoothing applied.
12. BEAMWIDTH The angle between the -6dB points in
the polar response of the loudspeaker when driven in
the operating mode which utilizes the largest number of
individually amplified pass bands. 1/6 octave Gaussian
smoothing applied.
Data presented on this spec sheet represents a selection of
the basic performance specifications for the IC6-2082. These
specifications are intended to allow the user to perform a
fair, straightforward evaluation and comparison with other
loudspeaker spec sheets. For a detailed analysis of this
loudspeaker’s performance, please download the GLL file
and/or the CLF file from our website: communitypro.com
POS (+)
CO M (–)
70V
25W
50W
100W
200W
COM
100V
50W
100W
200W
N/C
COM
Community Professional Loudspeakers
333 East Fifth Street, Chester, PA 19013-4511 USA
Phone (610) 876-3400 • Fax (610) 874-0190
communitypro.com • info@communitypro.com
CAUTION: Installation of loudspeakers should only be
performed by trained and qualified personnel. It is strongly
recommended that a licensed and certified professional
structural engineer approve the mounting design.
IC6-2 082/96 [2 5JUL2 016]
Loading...