Important Safety Information
Please read before proceeding
• DO NOT place objects on top of the device, as
objects may scratch the screen.
• DO NOT drop your device or subject it to severe
impacts. Bending the body and pushing the display or
keys with extreme force could damage the device.
• DO NOT use a pen or any sharp object to tap the
screen.
• DO NOT expose the device to dirty or dusty
environments.
• DO NOT place the device on an uneven or unstable
surface.
• DO NOT insert any foreign objects into the device.
• DO NOT expose the device to strong magnetic or
electrical field.
• DO NOT use or store this equipment in a place where
it will be exposed to high temperatures, such as near
an open flame or heat-emitting equipment.
• DO NOT use it or store it where fluids such as water
can splash onto it. Raindrops, water spray, juice,
coffee, steam, or other types of liquids will also cause
malfunctions.
• Using this device for long periods of time may cause
the device to get warm. If you feel the device is too
warm, avoid sustained contact with exposed skin
otherwise this might cause discomfort, or eventually a
burn.
• Refer to the rating label on the device and be sure
that the power adapter complies with the rating. Only
use accessories specified by the manufacturer.
• Disconnect the device from an electrical outlet and
power off before cl eaning the device.
1
• NEVER attempt to connect or disconnect the power
adapter with wet hands.
• Clean the touch screen with a soft cloth. If needed,
dampen the cloth slightly before cleaning. Never use
abrasives or cleaning solutions.
• DO NOT disassemble the device. Only a certified
service technician should perform repair.
• Please check with your Local Authority or retailer for
proper disposal of electronic products.
• Please Users have to use the connection to USB
interface s with USB 2.0 version or hig her.
• Please make sure the temperature for adapter will not
be higher than 50 °C
• Do not store your phone in temperatures higher than
50ºC.
• The operating temperature for this device is from 0ºC
to 45ºC.
• The adapter shall be installed near the equipment
and shall be easily accessible.
• The temperature of the device might increase while
the CPU is busy handling resource consuming
activities such as high resolution video decoding.
The SW protection mechanism will ensure stop
charging whenever the temperature is over the
predefined threshold and prepare for shut down if
necessary. Please worry not.
Safety Precautions for Battery Use
• Keep the battery dry and away from any liquid since
this may cause a short circuit.
• Keep the battery away from metal objects since this
may cause a short circuit.
• Do not use damaged or deformed batteries.
• If the battery emits a foul odor, discontinue use.
• Keep the battery away from babies and small
children.
2
• If the battery leaks:
• Do not allow the leaking fluid to come in contact
with your skin, eyes or clothing. If already in
contact, rinse with clean water immediately and
seek medical advice.
• Keep the battery away from fire since this may
cause the battery to explode.
• Do not attempt to open or service the battery yourself.
• Do not dispose battery in fire or water.
• Recycle or dispose used batteries according to the
local regulations.
Road and Environmental Safety
• Turn off the phone in areas with a potentially
explosive atmosphere or where flammable objects
exist such as gas stations, fuel depots, and chemical
plants among others. Sparks from these areas could
cause explosion or fire and result in injury or even
death.
• Do not use hand-held phones while driving a vehicle.
Use hands-free devices as an alternative.
Safety in Aircraft
Do not use the phone on board an aircraft. The phone’s
network signals may cause interference to the navigation
system. As a safety measurement, it is against the law in
most countries to use the phone on board an aircraft.
Copyright Information
Copyright © Sharp® Corporation, 2012. All rights
reserved.
Android is a trademark of Google Inc. Use of this
trademark is subject to Google Permissions.
3
This product has an Android™ platform based on Linux,
which can be expanded by a variety of JME-based
application SW.
Google™, the Google logo, Android™, the Android logo
and Gmail™ are trademarks of Google Inc. Use of this
trademark is subject to Google Permissions.
microSD™ is a trademark of SD Card Association.
Bluetooth and the Bluetooth logo are trademarks owned
by Bluetooth SIG, Inc.
Java, JME and all other Java-based marks are
trademarks or registered trademarks of Sun
Microsystems, Inc. in the United States and other
countries.
All products use in this device and trademarks mentioned
herein are trademarks or registered trademarks of their
respective owners.
Intellectual Property Right Information
Right to all technologies and products that comprise this
device are the property of their respective owners:
This product has an Android platform based on Linux,
which can be expanded by a variety of Java-Script-based
application SW.
Google, the Google logo, Android, the Android logo,
Gmail, and YouTube are trademarks of Google Inc.
Bluetooth and the Bluetooth logo are trademarks owned
by Bluetooth SIG, Inc.
Java, JME and all other Java-based marks are
trademarks or registered trademarks of Sun
Microsystems, Inc. in the United States and other
countries.
4
Compliance Information
SAR Information
THIS MOBILE DEVICE MEETS GUIDELINES FOR
EXPOSURE TO RADIO WAVES. Your mobile device is a
radio transmitter and receiver. It is designed not to exceed
the limits for exposure to radio waves recommended by
international guidelines. These guidelines were
developed by the independent scientific organization
ICNIRP and include safety margins designed to assure
the protection of all persons, regardless of age and
health.
The exposure guidelines for mobile devices employ a unit
of measurement known as the Specific Absorption Rate
or SAR. The SAR limit stated in the ICNIRP guidelines is
2.0 W/kg averaged over 10 grams of tissue. Tests for
SAR are conducted using standard operating positions
with the device transmitting at its highest certified power
level in all tested frequency bands. The actual SAR level
of an operating device can be below the maximum value
because the device is designed to use only the power
required to reach the network. That amount changes
depending on a number of factors such as how close you
are to a network base station. The highest SAR value
under the ICNIRP guidelines for use of the device at the
ear is 0.99 W/kg and at the body is 0.891 W/kg (The
measure distance of 1.5 cm). Use of device accessories
and enhancements may result in different SAR values.
SAR values may vary depending on national reporting
and testing requirements and the network band.
5
WEEE Notice
The WEEE logo on the product or on its box indicates that
this product must not be disposed of or dumped with your
other household waste. You are liable to dispose of all
your electronic or electrical waste equipment by relocating
over to the specified collection point for recycling of such
hazardous waste. Isolated collection and proper recovery
of your electronic and electrical waste equipment at the
time of disposal will allow us to help conserve natural
resources. Moreover, proper recycling of the electronic
and electrical waste equipment will ensure safety of
human health and environment. For more information
about electronic and electrical waste equipment disposal,
recovery, and collection points, please contact your local
city center, household waste disposal service, shop from
where you purchased the equipment, or manufacturer of
the equipment.
RoHS Compliance
This product is in compliance with Directive 2002/95/EC
of the European Parliament and of the Council of 27
January 2003, on the restriction of the use of certain
hazardous substances in electrical and electronic
equipment (RoHS) and its amendments.
6
European Union Regulatory
Conformance
The equipment complies with the RF Exposure
Requirement
1999/519/EC, Council Recommendation of 12 July 1999
on the limitation of exposure of the general public to
electromagnetic fields (0–300 GHz). This equipment
meets the following conformance standards: EN50360,
EN62209-1, EN60950-1, IEC60950-1, EN50332-1/2,
EN301489-1, EN301489-3, EN301489-7, EN301489-17,
EN301489-24, EN301511, EN301908-1/2, EN300328,
EN300440-1/2, EN55022, EN55024, EN62311,
EN62209-2,EN62479,EN55013, EN55020, EN61000-3-2/
-3-3.
For the device which tests accordance to EN609501:2006, it is mandatory to perform audio tests for
EN50332. This device have been tested to comply with
the Sound Pressure Level requirement laid down in the
applicable EN 50332-1 and EN 50332-2 standards.
Permanent hearing loss may occur if earphones or
headphones are used at high volume for prolonged
periods of time.
A pleine puissance, l’écoute prolongée du baladeur peut
endommager l’oreille de l’utilisateur.
7
The conformity assessment procedure has been followed
0682
with the involvement of the following Notified Body:
Cetecom TESTLAB
Identification mark: CE0682
(Notified Body) CE
Changes or modifications to this product not authorized
by the manufacturer could void the EMC compliance and
negate your authority to operate the product. This product
has demonstrated EMC compliance under conditions that
included the use of compliant peripheral devices and
shielded cables between system components. It is
important that you use compliant peripheral devices and
shielded cables between system components to reduce
the possibility of causing interference to radios,
televisions, and other electronic devices.
We, hereby, declare that this cellular, Bluetooth radio is in
compliance with the essential requirements and other
relevant provisions of Directive 1999/5/EC.
This equipment may be operated in:
AT BE BG CH CY CZ DE DK
EE ES FI FR GB GR HU IE
IT IS LI LT LU LV MT NL
NO PL PT RO SE SI SK TR
8
FCC Regulations:
• This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause
undesired operation.
• This device has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful
interference in a residential installation. This
equipment generates, uses and can radiated radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there
is no guarantee that interference will not occur in a
particular installation If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the
interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and
receiver.
- Connect the equipment into an outlet on a circuit
different from that to which the receiver is
connected.
- Consult the dealer or an experienced radio/TV
technician for help.
Changes or modifications not expressly approved by the
party responsible for compliance could void the user's
authority to operate the equipment.
9
• The antenna(s) used for this transmitter must not be
co-located or operating in conjunction with any other
antenna or transmitter.
RF Exposure Information (SAR)
This device meets the government's requirements for
exposure to radio waves.
This device is designed and manufactured not to exceed
the emission limits for exposure to radio frequency (RF)
energy set by the Federal Communications Commission
of the U.S. Government.
The exposure standard for wireless devices employs a
unit of measurement known as the Specific Absorption
Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg.
*Tests for SAR are conducted using standard operating
positions accepted by the FCC with the device
transmitting at its highest certified power level in all tested
frequency bands. Although the SAR is determined at the
highest certified power level, the actual SAR level of the
device while operating can be well below the maximum
value. This is because the device is designed to operate
at multiple power levels so as to use only the poser
required to reach the network. In general, the closer you
are to a wireless base station antenna, the lower the
power output.
The highest SAR value for the device as reported to the
FCC when tested for use at the ear is 0.523 W/kg and
when worn on the body, as described in this user guide, is
0.739 W/kg. (Body-worn measurements differ among
device models, depending upon available accessories
and FCC requirements.)
10
While there may be differences between the SAR levels
of various devices and at various positions, they all meet
the government requirement.
The FCC has granted an Equipment Authorization for this
device with all reported SAR levels evaluated as in
compliance with the FCC RF exposure guidelines. SAR
information on this device is on file with the FCC and can
be found under the Display Grant section of www.fcc.gov/
oet/ea/fccid after searching on FCC ID: X7H-SH837WI
This device is compliance with SAR for general population
/uncontrolled exposure limits in ANSI/IEEE C95.1-1999
and had been tested in accordance with the measurement
methods and procedures specified in OET Bulletin 65
Supplement C.
For body worn operation, this device has been tested and
meets the FCC RF exposure guidelines for use with an
accessory that contains no metal and the positions the
handset a minimum of 1.0 cm from the body. Use of other
accessories may not ensure compliance with FCC RF
exposure guidelines.
11
Loading...