Care and Cleaning ..................................7
NOTICE: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15B of the FCC
Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
□ Reorient or relocate the receiving antenna.□ Increase the separation between the equipment and the receiver.□ Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
□ Consult the dealer or an experienced radio/TV technician for help.
Warranty
WHAT IS COVERED
The manufacturer warrants this lighting fixture to be free from defects in materials and workmanship for a period of five (5) years from
date of purchase. This warranty applies only to the original consumer purchaser and only to products used in normal use and service. If
this product is found to be defective, the manufacturer’s only obligation, and your exclusive remedy, is the repair or replacement of the
product at the manufacturer’s discretion, provided that the product has not been damaged through misuse, abuse, accident, modifications,
alterations, neglect, or mishandling.
WHAT IS NOT COVERED
This warranty shall not apply to any product that is found to have been improperly installed, set-up, or used in any way not in accordance
with the instructions supplied with the product. This warranty shall not apply to a failure of the product as a result of an accident, misuse,
abuse, negligence, alteration, faulty installation, or any other failure not relating to faulty material or workmanship. This warranty shall not
apply to the finish on any portion of the product, such as surface and/or weathering, as this is considered normal wear and tear.
The manufacturer does not warrant and specifically disclaims any warranty, whether express or implied, of fitness for a particular purpose,
other than the warranty contained herein. The manufacturer specifically disclaims any liability and shall not be liable for any consequential
or incidental loss or damage, including but not limited to any labor / expense costs involved in the replacement or repair of said product.
Contact the Customer Service Team at 1-877-527-0313 or visit www.HomeDepot.com
2
Pre-Installation
PLANNING INSTALLATION
WARNING: Shut off power at the circuit breaker or fuse panel before removing the old fixture.
PRODUCT DESCRIPTION AND CHARACTERISTICS
This LED Shop Light can be mounted to the shop or garage ceiling and requires little space. It is energy-saving, environmentally friendly,
and used for emitting soft and even distribution of light.
NOTE: Keep your receipt and these instructions for proof of purchase.
TOOLS REQUIRED
Measuring
Tape
Power Drill with
drill bits
PACKAGE CONTENTS
A
PartDescriptionQuantity
A40 in. LED Shop Light With Bluetooth Speakers1
HARDWARE INCLUDED
NOTE: Hardware not shown to actual size.
PartDescriptionQuantity
AAMounting Chain with S Hook2
AA
Before beginning assembly, installation, or operation of product, make sure all parts are present. Compare parts with package
contents list and hardware contents list above. If any part is missing or damaged, do not attempt to assemble, install, or operate the
product. Contact customer service for replacement parts.
Select a suitable location that can support the weight of the fixture. Determine the method for mounting the fixture based on the type
of ceiling before drilling.
3 HOMEDEPOT.COM
Please contact 1-877-527-0313 for further assistance.
Installation
□ Mark two spots on the ceiling 30 in. apart for the mounting hardware (not included).
NOTE: Separate mounting hardware (not included) not shown to actual size.
For mounting to drywall:
Toggle bolt x 2
For mounting to wood:
Hook screw x 2
Mounting to drywall
1
□ Drill two holes large enough to clear the closed flaps of
the butterfly nut on the toggle bolt (not included). Make
sure to fasten the toggle bolt into the butterfly nut before
inserting the flaps into the ceiling. Tighten the toggle bolt.
PartDescriptionQuantity
Toggle BoltsConsisting of a No. 10-24 bolt 2-7/8 inches long with two
StudsMeasuring 1-3/4 inches overall and having 1-1/4 inches of
Metal HooksWith a No. 10-24 threaded hole that engages the bolt
tapered wings 1 by 5/16 inch.
wood screw threads on one end and at least six No. 10-24
machine screw threads on the other end.
threads.
Mounting to wood
2
□ Drill two 1/16 in. diameter holes in the ceiling to
accommodate hook screws (not included). Make sure to
fasten the combo wood-machine end into the metal hook.
Tighten the hook screw (not included) into the wood.
2
2
2
Attaching the light to the chain
3
□ Attach the S hook at the bottom of the mounting chain
(AA) to the hanger on the light fixture. Repeat this step on
the other side of the fixture.
AA
A
4
Attaching the chain to the ceiling
4
□ Hang the fixture body by placing one chain (AA) over each
hook (not included) that has been installed on the ceiling.
□ Adjust chains to level light. The fixture must hang at least
3 in. from the ceiling.
AA
A
Installation (continued)
Plugging into a power supply
5
□ After installation, plug the power cord into an electrical outlet.
□ Pull the chain down to turn the light on and off.
Power Cord
A
AA
Pull Cord
Connect to Bluetooth wireless technology enabled Device
□ Plug the power cord for the Commercial Electric 40 in. Shop Light with Bluetooth speakers into an electrical outlet. When plugged in,
the speakers will indicate “Power On”.
□ Enable Bluetooth on your smart device.
□ Wait for the smart device to detect the shop light and then select it to pair the device to the speakers. When successfully paired, the
speakers will indicate “Your device is connected”.
□ Play music from your device while connected to the shop light to enjoy sound from the Bluetooth speakers.
□ Turn off music on your smart device, disconnect the shop light from Bluetooth on your smart device, or disable Bluetooth
functionality on your smart device when sound is not wanted from the shop light speakers
NOTICE: Bluetooth enabled smart devices typically have a range of approximately 33 ft. (10 m). Attempting to pair your smart device to the Bluetooth
speakers beyond the intended range can result in poor audio quality, drop-outs, or failure to connect.
NOTICE: Only one device can be connected to the Bluetooth speakers at a time.
5 HOMEDEPOT.COM
Please contact 1-877-527-0313 for further assistance.
Loading...
+ 11 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.