Page 1
SD-02416 User’s Manual
-1-
SD-02416
User’s Manual
Edition 1.0
2008/03/21
Page 2
SD-02416 User’s Manual
-2-
Copyright
The trademarks mentioned in the manual are legally registered to their respective
companies.
Disclaimer
Notice
The written content provided with this product in the p roperty of Taiwan Commate.
No part of this manual may be reproduced, copied, transmitted in any form or by
any means without prior written permission of Taiwan Commate.
Manual Classification
In order to assist in the use of this product, Taiwan Commate has categorized the
user manual. For detailed product information and specifications, please carefully
read the “ Product User Manual ”.
Trademark
All trademarks are the property of their respective holders.
Any questions please visit our website at TUhttp://www.commell.com.twUT.
Page 3
SD-02416 User’s Manual
-3-
Packing List:
Hardware:
SD-02416 PCI Capture Card x1
Cable kit:
CD Content:
Drivers (Including User’s Manual)
D-SUB 9 Cable x 1
4 BNC Cable x 3
Page 4
SD-02416 User’s Manual
-4-
1.0 <Product Specification>
General Specification
Form Factor PCI with 124-pin interface
Controller TW6802
Accessories 1 x (3 x 8pin) D-SUB 9 Cable
1 to 8 BNC Cable x 1
1 to 4 BNC Cable x 1
Features 16 channel video input for camera
Support 30/25 fps at NTSC/PAL
Support 720*480 / 720*576 (NTSC / PAL) resolution
Page 5
SD-02416 User’s Manual
-5-
1.1 <Mechanical Drawing>
‘
Page 6
SD-02416 User’s Manual
-6-
2.1 <Connector Location>
GPIO 1- 4
JSEL1
JSEL2
JSENABLE
TW6805 Reserve
CN_Audio 1- 4
Video input
Microchip
Page 7
SD-02416 User’s Manual
-7-
2.2 <Jumper Reference>
Card ID Selection:
Default setting
Pin Description
JSEL1 Select ID Card
JSEL2 Select ID Card
JSENABLE1 Reserve
JSEL1 JSEL2
Card 0
Card 1
Card 2
Card 3
JSEL1
JSEL2
JSENABLE1
1 3 1 3
Page 8
SD-02416 User’s Manual
-8-
2.3 <Connector Reference>
2.3.1 <GPIO Interface>
Connector: J4 , J5 , J6 , J7
Type: 20-pin (10x2) Header
Device 1 Device 2 Device 3 Device 4
GPIO 1
J4 Pin 4 J4 Pin 6 J4 Pin 8 J4 Pin 10
GPIO 2
J5 Pin 4 J5 Pin 6 J5 Pin 8 J5 Pin 10
GPIO 3
J6 Pin 4 J6 Pin 6 J6 Pin 8 J6 Pin 10
GPIO 4
J7 Pin 4 J7 Pin 6 J7 Pin 8 J7 Pin 10
GPIO 5
J4 Pin 12 J4 Pin 14 J4 Pin 16 J4 Pin 18
GPIO 6
J5 Pin 12 J5 Pin 14 J5 Pin 16 J5 Pin 18
GPIO 7
J6 Pin 12 J6 Pin 14 J6 Pin 16 J6 Pin 18
GPIO 8
J7 Pin 12 J7 Pin 14 J7 Pin 16 J7 Pin 18
2 20
1 19
Page 9
SD-02416 User’s Manual
-9-
2.3.2 < Video input connector >
Connector:J8,J10,J13,J16
Type: 4-pin (2X2) Header
( 1 ) Standard video input: J9, J11, J14, J17
J9/J11/J14/J17 is the st andard video input of SD-02416. Video resolution and
real time frame rate can be available through this connector.
( 2 ) 16 channels input by shared frame: J1, J2, J3
With share frame technology, SD-02416 can receive up to 16 channel
composite inputs through J1, J2, J3. (The resolution and captured frame rate is
related to the performance of the system hardware and limited by PCI bandwidth.)
J8,J10,J13,J16 Description
1-2 Impedance matching 75Ω
2-3 Impedance matching 56Ω
Default setting
3 1
4 2
Page 10
SD-02416 User’s Manual
-10-
3.1 <Driver Setting>
1. When you completed the Hardware installation, Please
select file location ‘’L:\Driver\SD-02416\SD02416\SETUP’’.
2. Please choose ‘’Next’’.
Page 11
SD-02416 User’s Manual
-11-
3. Please choose ‘’I accept the terms of the license
agreement’’ the press ‘’Next’’.
4. Please fill in ‘’User Name’’、’’Company Name’’ the press
‘’Next’’.
Page 12
SD-02416 User’s Manual
-12-
5. Please choose ‘’complete’’ the press ‘’Next’’.
6. Please press ‘’Install’’.
Page 13
SD-02416 User’s Manual
-13-
7. Please TCC2401 Capture and TCC2401A Audio Capture
both choose ‘’Continue Anyway’’.
Page 14
SD-02416 User’s Manual
-14-
8. Please choose ‘’Finish’’.
9. After driver install, please enter Device Manager ,
Driver Install OK!!
Page 15
SD-02416 User’s Manual
-15-
3.2 <Sample Program>
1. You can use COMMELL “TCCVDCApp” sample program to
test and you can appliance TCCDVCApp.exe on desktop.
2. Please choose ‘’Preview’’.
3. Then you can see program interface as following.
Page 16
SD-02416 User’s Manual
-16-
Explanation of Sample program function
Device ID:
It is mean Techwell Chipset. One SD-02416
have 4 chipset, so, you can select 0/1/2/3.
Channel ID:
Per chip can support 4 Video input, So, You
can select 0/1/2/3 for Video input.
But you’ll need to set “Channel No Setup”
first.
Channel No Setup:
Please set how many video-In channels per
Device. Per device is allow 4 channels.
Snapshot:
Catch the image on working channel.
Callback Test:
Catch the series image on working channel
Note:
Every channel is work separately, when you
want to change any setting, please stop all
channels which working.
Page 17
SD-02416 User’s Manual
-17-
3.3 <Device ID & Channel ID sample>
1. If you Setting 4 Device as 4 Channels. The program show
will be as following.
2. If you Setting 4 Device as 16 Channels. The program show
will be as following:
Page 18
SD-02416 User’s Manual
-18-
Contact Information
Any advice or comment about our products and service, or anything
we can help you please don’t hesitate to contact with us. We will do
our best to support you for your products, projects and business.
Taiwan Commate Computer Inc.
Address
8F, No. 94, Sec. 1, Shin Tai Wu Rd., Shi Chih
Taipei Hsien, Taiwan
TEL +886-2-26963909
FAX +886-2-26963911
Website
TUhttp://www.commell.com.twUT
E-Mail
TUinfo@commell.com.twUT (General Information)
TUtech@commell.com.twUT (Technical Support)
Commell is the trademark of Taiwan Commate Computer INC.
Loading...