Commell MP-878D Series, MP-878D8, MP-878D4, MP-878D2 User Manual
MP-878D Series
Mini-PCI Video Capture Card
User’s Manual
Edition Release Date
1.0 2007/01/25
1.1 2008/06/10
1.2 2008/09/22
1.3 2009/06/29
MP-878D User’s Manual
Copyright
Copyright 2008, all rights reserved. This document is copyrighted and all rights are
reserved. The information in this document is subject to change without prior notice to
make improvements to the products.
This document contains proprietary information and pr otected by copyright. No part of
this document may be reproduced, copied, or translated in any form or any means
without prior written permission of the manufacturer.
All trademarks and/or registered trademarks contains in this document are propert y of
their respective owners.
Disclaimer
The company shall not be liable for any incidental or consequential damages resulting
from the performance or use of this product.
The company does not issue a warranty of any kind, express or implied, including
without limitation implied warranties of merchantability or fitness for a particular purpose.
The company has the right to revise the manual or include changes in the specifications
of the product described within it at any time without notice and without obligation to
notify any person of such revision or changes.
Trademark
All trademarks are the property of their respective holders.
Any questions please visit our website at TUhttp://www.commell.com.twUT
2
MP-878D User’s Manual
Packing List:
Please check the package content before you starting using the board.
Cable Kits:
Dual D-SUB 9 Cable x 1 (MP-878D8 only) D-SUB 9 Cable x 1 (MP-878D4 only)
4 BNC Cable x 2 (MP-878D8 only)
4 BNC Cable x 1 (MP-878D4 only)
Composite and S-video Cable x1
(MP-878D only)
Composite and S-video Cable x2
(MP-878D2 only)
Hardware:
◆ 1 x MP-878 series Mini-PCI Video Capture card
◆ 1 x Cable support S-video & Composite for MP-878D
◆ 2 x Cable support S-video & Composite for MP-878D2
◆ 1 x BNC cable & 10-pin header to D-sub 9-pin cable for MP-878D4
◆ 2 x BNC cable & 10-pin header to D-sub 9-pin cable for MP-878D8
◆ 1 x Utility CD
3
MP-878D User’s Manual
Index
Chapter 1 <Introduction>...............................................................6
1.1 <Product Overview>............................................................................6
1.2 <Hardware requirement>....................................................................6
1.3 <Software requirement>......................................................................6
1.4 <Dimensions> .....................................................................................7
1.5 <Hardware Interface > ........................................................................8
1.6 <Hardware installation > .....................................................................8
1.7 <Software installation >.......................................................................9
1.8 <Sample Program>...........................................................................20
1.9 <How to Get the video> (Based on MP-878D /D2 /D4 /D8)：..........25
Contact Information.........................................................................30
4
MP-878D User’s Manual
(This Page is left for Blank)
5
MP-878D User’s Manual
Chapter 1 <Introduction>
1.1 <Product Overview>
COMMELL MP-878D series is a Video input Video Capture Card. That supports up to
D1 resolution at 30/25 fps (one Chip). Also MP-878D/D4 series supports NTSC/PAL
signals.(MP-878D2/D8 is allow 2 Cards which installed in one PC system. If user wants
to use more than two MP-878D2/D8 Mini-PCI capture card in one system, User needs to
be aware of that each 878 chip on the card needs to be set for different PCI Subsytem
ID in EEPROM device. And please inform COMMELL to set different ID before purchase.
Also note , MP-878D2/D8 ONLY compatible with COMMELL’s Motherboard
1.2 <Hardware requirement>
I. Intel Pentium III 1.0 GHz or above (The CPU speed depends on the video
Frame rate, channels and resolution)
II. 256 MB RAM or above
III. Free Mini-PCI slot
1.3 <Software requirement>
Microsoft Windows 2000/XP with DirectX 9.0 or abov e
6
MP-878D User’s Manual
1.4 <Dimensions>
44.6 x 59.5 mm ( Mini-PCI Type-III B )
Figure 1.2
7
MP-878D User’s Manual
1.5 <Hardware Interface >
Connector: CN_DVR2
Type: onboard 2 x 5-pin header, pitch=2.0mm
Pin Description Pin Description
1 Ground 2 COMP11
3 Ground 4 COMP12
5 Ground 6 C1
7 Ground 8 COMP10
9 Ground 10 COMP13
Connector: CN_DVR1
Type: onboard 2 x 5-pin header, pitch=2.0mm
Pin Description Pin Description
1 Ground 2 COMP21
3 Ground 4 COMP22
5 Ground 6 C2
7 Ground 8 COMP20
9 Ground 10 COMP23
1.6 <Hardware installation >
1. Turn off your computer and unplug the power cord.
2. Remove the cover of your computer.
3. Touch the metal part on the surface of your computer to neutralize
Any static electricity that might be on your body.
4. Place the MP-878D series into the Motherboard’s Mini-PCI slot and
connect Corresponding accessories to the MP-878D series.
5. Replace the cover of your computer chassis
6. Plug in the power cord and turn on the computer.
8
915GM
ICH6-M
MP-878D User’s Manual
1.7 <Software installation >
When you completed the Hardware installation, the system will auto –detect
And a message pops up as following:
Please all select “Cancel”
9
Loading...