The trademarks mentioned in the manual are legally registered to their respective
companies.
Disclaimer
Notice
The written content provided with this product in the property of Taiwan Commate.
No part of this manual may be reproduced, copied, transmitted in any form or by
any means without prior written permission of Taiwan Commate.
Manual Classification
In order to assist in the use of this product, Taiwan Commate has categorized the
user manual. For detailed product information and specifications, please carefully
read the “Product User Manual”.
Trademark
All trademarks are the property of their respective holders.
Any questions please visit our website at TUhttp://www.commell.com.twUT
2
Page 3
MP-6802 User’s Manual
Packing List:
Please check package component before you use our products.
☆ MP-6802 board
☆ Quick Installation Guide
☆ CD for manual and Demo drivers
☆ Cable Kit (Com Cable, Camera Cable)
Internal I/O Cable
External I/O Cable
Dimensions (W x L)
1 ~ 4 video input Mini-PCI Capture Card
One TW6802
Two 10bit video CMOS analog/ digit controller (ADCs)
NTSC (M), NTSC (4.43), PAL (B, D, G, H, I), PAL (M),
PAL (N), PAL (60) and SECAM (M)
NTSC 720*480 , NTSC 640*480 , NTSC 320*240 ,
NTSC 160*120 / PAL 720*576 , PAL 384*288 , PAL
192*144
1 X VIDEO Cable
1 X 1~4 channel video input (BNC connector) Cable
45nm x 60nm
7. Please choose “Yes, I want to restart my computer now.’’
the press ‘’Finish’’
8. After driver install, please enter Device Manager, Driver
Install OK!!
11
Page 12
MP-6802 User’s Manual
1.4 <Sample Program>
1. You can use COMMELL “TCCVDCApp” as your sample program to start
your application or as a test application for learning the functionality of
TCCDVC application and Dll library. User can find the execution application
on desktop window or find the source code and execution files in directory
C:\Profram Files\Commate\TCC6802\.
By running TCCDVCApp.exe
2. Please choose “Preview”.
12
Contact Information
Page 13
MP-6802 User’s Manual
1.41 <Preview>
1. If you Setting 0 Device as 4 Channels. The program show will be as
following.
13
Page 14
MP-6802 User’s Manual
Explanation of Sample program function
Device ID:
It is mean Techwell Chipset. One MP-6802
have 1 chipset, so, Then you can see
“Channel No Setup”Device: 0.
Channel ID:
Per chip can support 4 Video input, So, Then
you can select 0/1/2/3 for Video input.
But you’ll need to set “Channel No Setup” Ch
first.
Channel No Setup:
Please set number of video-In channels per
Device. Per device is allowing 4 channels.
Snapshot:
Catch the image on working channel.
Callback Test:
Catch the series image on working channel
Note:
Every channel is work separately, when you
want to change any setting, please stop all
channels which working.
14
Contact Information
Page 15
MP-6802 User’s Manual
1.42 <Video Motion>
Please choose “Video Motion”, then you can see program interface as
following.
Enable:
If user “ check ” this box, it will enable video motion detection.
Action On Motion:
If this box is checked, the registered call back function will be executed, when
video motion is been detected. The call back function needs to be registered
during application initialization.
Indicator:
If this box is checked, it will show red spots as an motion indication, when the
video motion is been detected.
Threshold:
Select motion detection sensitivity level, the number smaller, the sensitivity
stronger.
15
Page 16
MP-6802 User’s Manual
1.42 <Video Motion>
Please choose ‘’Video Recording’’, then you can see program interface as
following.
Video Compressor:
Enable video compressor link, the list box window will list all video compressor
components in the system. The user can select its own video com p ressor from t he
list, if user has installed own video compressor.
Audio Capture Devices:
Enable audio capture device link, the list box window will list all audio capture
device in the system. The user can select one of audio device from the list.
16
Contact Information
Page 17
MP-6802 User’s Manual
Audio Compressor:
Enable audio compressor link, the list box window will list all audio compressor
components in the system. The user can select its own audio compresso r from the
list, if user has installed own audio compressor.
Start Capture Button:
Press the button, the test program will start to run, user will see real time video
on the preview window.
Record:
User check this, it will start to record the video.
17
Page 18
MP-6802 User’s Manual
Contact Information
Any advice or comment about our products and service, or anything
we can help you please don’t hesitate to contact with us. We will do
our best to support you for your products, projects and business.
Taiwan Commate Computer Inc.
Address
TEL +886-2-26963909
FAX +886-2-26963911
Website
E-Mail
8F, No. 94, Sec. 1, Shin Tai Wu Rd., Shi Chih
Taipei Hsien, Taiwan