COMMELL LV-67L User Manual

LV-67L

Mini-ITX Motherboard

User’s Manual

Edition 1.3

2014/05/14

LV-67L User’s Manual

Copyright

Copyright 2012, all rights reserved. This document is copyrighted and all rights are
reserved. The information in this document is subject to change without prior notice to
make improvements to the products.
This document contains proprietary information and pr otected by copyright. No part of
this document may be reproduced, copied, or translated in any form or any means
without prior written permission of the manufacturer.
All trademarks and/or registered trademarks contains in this document are propert y of
their respective owners.

Disclaimer

The company shall not be liable for any incidental or consequential damages resulting
from the performance or use of this product.
The company does not issue a warranty of any kind, express or implied, including
without limitation implied warranties of merchantability or fitness for a particular purpose.
The company has the right to revise the manual or include changes in the specifications
of the product described within it at any time without notice and without obligation to
notify any person of such revision or changes.

Trademark

All trademarks are the property of their respective holders.

Any questions please visit our website at TUhttp://www.commell.com.twUT

-1-

LV-67L User’s Manual

(

)

Packing List:

Please check the package content before you starting using the board.

Hardware:

LV-67L Mini-ITX Motherborad x 1

Cable Kit:

SATA Cable x 2

(OALSATA3-L)/ (1040529)

Power Cable x 1

(OALATX-P3S2)/ (10400058)

COM Port Cable x 1

OALES-BKU1)/ (1040083

I/O Shield x 1

(OPLATE-LV67E )/ (1270046)

Printed Matters:

Driver CD (Including User’s Manual) x 1

DC Power Cable x 1

(OALDC-A)/ (1040433)

DVI module with bracket x 1

(BADPDVIP_A & OALDVI-DF13)

(4120008021 &1040483)

CPU Cooler x 1

(OHS-P-M-7)/ (2181010002)

Optional Cable:

USB2.0 Cable x 1

(OALUSBA-1)/ (1040172)

-2-

Dual COM PORT cable x 1
(OALES-BKU2)/ (1040087)

LV-67L User’s Manual

Index

Chapter 1 <Introduction>.............................................................6

1.1 <Product Overview> ..................................................................................... 6

1.2 <Product Specification>................................................................................7

1.3 <Mechanical Drawing>.................................................................................9

1.4 <Block Diagram>........................................................................................10

Chapter 2 <Hardware Setup>..................................................11

2.1 <Connector Location>................................................................................ 11

2.2 <Jumper Location & Reference>................................................................ 12

2.3 <Connector Reference>.............................................................................13

2.3.1 <Internal Connectors>.............................................................. 13

2.3.2 <External Connectors>............................................................. 13

2.4 <Memory Setup>........................................................................................ 14

2.4.1 <Memory Setup>.......................................................................14

2.5 <CMOS & ATX Setup>............................................................................... 15

2.6 <Serial ATA Interface>................................................................................ 16

2.7 <Ethernet Interface>...................................................................................16

2.8 <Onboard Display Interface> .....................................................................17

2.8.1 <Analog Display>.......................................................................17

2.8.2 <Digital Display>........................................................................18

2.8.3 <DVI Interface>..........................................................................22

2.9 <Integrated Audio Interface>...................................................................... 23

2.10 <USB Interface>.......................................................................................25

2.11 <Serial Port>............................................................................................. 27

2.12 <PCIE Mini Card and SIM Interface>....................................................... 30

2.12.1 <SIM Step>...............................................................................32

2.13 <GPIO and SMBUS Interface>.................................................................34

2.14 <Power Supply and Fan Interface >......................................................... 35

2.14.1 <Power Input>..........................................................................35

2.14.2 <Power Output>.......................................................................36

-3-

LV-67L User’s Manual

2.14.3 <Fan connector>......................................................................37

2.15 <Switch and Indicator>.............................................................................38

Chapter 3 <System Setup>.......................................................39

3.1 <Audio Configuration>................................................................................39

3.2 <Display Properties Setting> ......................................................................40

Chapter 4 <BIOS Setup>.............................................................42

Appendix A <I/O Port Pin Assignment>..........................44

A.1 <Serial ATA Port> .......................................................................................44

A.2 <IrDA Port>.................................................................................................44

A.3 <VGA Port>................................................................................................44

A.4 <LAN Port>.................................................................................................44

A.5 <LAN LED Port>.........................................................................................45

Appendix B <Flash BIOS>.........................................................46

B.1 <Flash Tool>...............................................................................................46

B.2 <Flash BIOS Procedure> ...........................................................................46

Appendix C <Programming GPIO’s>.................................47

Appendix D <Programming Watchdog Timer >.........48

Contact Information.......................................................................49

-4-

LV-67L User’s Manual

(This page is left for blank)

-5-

LV-67L User’s Manual

Chapter 1 <Introduction>

1.1 <Product Overview>

LV-67L the 2nd Generation Intel of the Mini-ITX motherboard, supports 2nd Generation

Intel Celeron® Processor 807UE/847E and features Intel HM65 chipset, integrated HD
Graphics, DDR3 memory, REALTEK High Definition Audio, Serial ATA and Intel Gigabit
LAN.

Intel Sandy Bridge Processor

The 2nd Generation Intel Celeron® Processor 807UE/847E is the next generation of
64-bit, multi-core mobile processor built on 32- nanometer process technology. Based
on a new micro-architecture.

New features for Intel HM65 chipset

The board integrates Intel HM65 chipset, supports integrated HD Graphics, built-in high
speed mass storage interface of serial ATA, High Definition Audio with 2 channels
surrounding sound.

All in One multimedia solution

Based on Intel HM65 chipset, the board provides high performance onboard graphics,
24-bit dual channel LVDS interface, DVI and 2 channels High Definition Audio, to meet
the very requirement of the multimedia application.

Flexible Extension Interface

LV-67LNB(807UE) provides two mini-PCIE socket.
LV-67LBU(847E) provides two mini-PCIE socket and one PCIE X16 slot.

-6-

LV-67L User’s Manual

1.2 <Product Specification>

General Specification

Form Factor Mini-ITX motherboard
CPU Intel® Celeron® Processor 807UE 1.0GHz (LV-67LNB)

Intel® Celeron® Processor 847E 1.1GHz (LV-67LBU)
Package type：FCBGA1023

Memory 1 x DDRIII SO-DIMM 1066/1333 MHz up to 4GB (LV-67LNB)

2 x DDRIII SO-DIMM 1066/1333 MHz up to 16GB (LV-67LBU)
Support Non-ECC, unbuffered memory only

Chipset Intel HM65
Real Time Clock Chipset integrated RTC with onboard lithium battery
Watchdog Timer Generates a system reset with internal timer for 1min/s ~ 255min/s
Power Management Supports ACPI 3.0 compliant
Serial ATA Interface 4 x serial ATAII interface with 300MB/s transfer rate

2 x serial ATAIII interface with 600MB/s transfer rate
The HM65 doesn’t support RAID function.

VGA Interface Onboard DSUB15 connector for VGA interface
LVDS Interface Onboard 24-bit dual channel LVDS connector with +3.3V/+5V/+12V

supply

DVI Interface Onboard DVI with 20-pin connector
Audio Interface Realtek ALC888 HD Audio
LAN Interface 1 x Intel 82579LM Gigabit LAN

1 x Intel 82574L Gigabit LAN

GPIO interface Onboard programmable 8-bit Digital I/O interface
Extended Interface LV-67LNB support 2 x PCIE mini card socket, 1 x SIM socket.

LV-67LBU support 1 x PCIE x16 slot, 2 x PCIE mini card socket, 1 x SIM
socket.
Optional support mSATA(SATAII) for above models in Mini_Card2,but
SATA6 will be disabled.

Internal I/O Port 3 x RS232, 1 x SMBUS, 1 x GPIO, 6 x USB2.0 ports, 1 x IrDA, 1 x DVI , 1

x LVDS, 4 x Serial ATAII, 2 x Serial ATAIII, 1 x Front panel Audio
and 1 x CDIN

External I/O Port 1 x PS/2, 2 x LAN ports, 1 x VGA port, 4 x USB2.0 ports, 1 x

RS232/422/485, 2 x RS232,1 x SPDIF and 1 x 2 Channel HD Audio

Power Requirement Standard 24-pin ATX power supply or 9~24V full range DC Input
Dimension 170mm x 170mm
Temperature Operating within 0~60 centigrade

Storage within –20~85 centigrade

7-

-

LV-67L User’s Manual

Ordering Code

LV-67LNB Intel® Celeron® Processor 807UE + HM65 with Onboard VGA, LVDS,

DVI, LAN, USB2.0, HD Audio, SATAII, SATAIII, SMBUS, LPC, SIM,
GPIO and PCI Express mini card.

LV-67LNBS Intel® Celeron® Processor 807UE + HM65 with Onboard VGA, LVDS,

DVI, LAN, USB2.0, HD Audio, SATAII, SATAIII, SMBUS, LPC, SIM,
GPIO, PCI Express mini card and mSATA.

LV-67LBU Intel® Celeron® Processor 847E + HM65 with Onboard VGA, LVDS,

DVI, LAN, USB2.0, HD Audio, SATAII, SATAIII, SMBUS, LPC, SIM,
GPIO, PCIE x16 and PCI Express mini card.

LV-67LBUS Intel® Celeron® Processor 847E + HM65 with Onboard VGA, LVDS,

DVI, LAN, USB2.0, HD Audio, SATAII, SATAIII, SMBUS, LPC, SIM,
GPIO, PCIE x16 , PCI Express mini card and mSATA.

The specifications may be different as the actual production.
For further product information please visit the website at

TUhttp://www.commell.com.twUT

8-

-

LV-67L User’s Manual

1.3 <Mechanical Drawing>

-

9-

LV-67L User’s Manual

1.4 <Block Diagram>

1 x PCI Express x16

(LV-67LBU only)

1 x CRT

1 x LVDS

1 x DVI

2 x Serial ATAIII
4 x Serial ATAII

ALC888 HD Audio

W25X64 SPI

Intel® Celeron® Processor 807UE
(1M Cache, 1.0 GHz)

LV-67LNB

Intel® Celeron® Processor 847E
(2M Cache, 1.1 GHz)

LV-67LBU

HM65

1 x 204-pin DDR3
SO-DIMM LV-67LNB
1066/1333/1600 MHz
up to 4GB

2 x 204-pin DDR3
SO-DIMM LV-67LBU
1066/1333/1600 MHz
up to 16GB

2 x PCI Express mini card

10 x USB 2.0

2 x Intel 82574L
1 x Intel 82579LM

1 x RS232/422/485

W83627DHG-P

F81216

10-

-

1 x RS232 & GPIO & IrDA
1 x PS/2

4 x RS232

LV-67L User’s Manual

Chapter 2 <Hardware Setup>

2.1 <Connector Location>

CN_AUDIO

CN_SMBUS

CN_IRCD_IN

CN_GPIO

JSPD1JSPD2

JACT1JACT2

MINI_CARD2

SIMM

MINI_CARD1

PCIE x16
CN_LPC

COM4

COM5/6

JFRNT

CN_USB3/4/5

SYSFAN CN_INV

SATA6 SATA3
SATA5 SATA2
SATA4 SATA1

CN_LVDS

SO-DIMM2

DC_IN

CPUFAN

CN_DVI

ATX

SO-DIMM1

PS/2 COM3+COM2 Audio SPDIF

USB_RJ45_1/2

COM1 + CRT

11-

-

LV-67L User’s Manual

2.2 <Jumper Location & Reference>

Jumper Function

JRTC CMOS Operating/Clear Setting
JVLCD Panel Voltage Setting
JAT Power mode select
JP1 Com1 Voltage Setting (For Pin 9)
JP2 Com2 Voltage Setting (For Pin 9)
JP3 Com3 Voltage Setting (For Pin 9)
JP4 Com4 Voltage Setting (For Pin 9)
JCSEL1

JCSEL2
JVUSB USB Voltage Setting

CN_COM2 RS-232 RS422 RS485 Setting
CN_IR IrDA Setting

JCSEL1

JP3

JP1 JP2

JCSEL2

JAT
JRTC
JVUSB

JP4

12-

-

JVLCD

LV-67L User’s Manual

2.3 <Connector Reference>

2.3.1 <Internal Connectors>

Connector Function Remark

SO-DIMM 2

L V-67LNB

SO-DIMM 1/2

LV-67LBU

SATA 1/2 7-pin Serial ATAIII connector
SATA 3/4/5/6 7-pin Serial ATAII connector
DC_IN DC 9~24V input connector

ATX
CN_AUDIO 5 x 2-pin audio connector

CD_IN 4-pin CD-ROM audio input connector
CN_DIO 6 x 2-pin digital I/O connector
CN_USB 3/4/5 5 x 2-pin USB connector
CPUFAN 4-pin CPU cooler fan connector
SYSFAN 3-pin system cooler fan connector
CN_LVDS 20 x 2-pin LVDS connector
CN_DVI 10 x 2-pin DVI connector
CN_INV 5-pin LCD inve rter connector
CN_IR 5-pin IrDA connector
CN_COM 4 10-pin RS232
CN_COM 5/6 20-pin 2 x RS232
CN_LPC 5 x 2-pin LPC connector

JFRNT
PCIE 164-pin x16 PCIE slot

Mini-PCIE1/2 2 x 52-pin Mini-PCIE socket
JAT Power mode select
JSPD 1/2 LAN Speed LED connector
JACT 1/2 LAN Activity LED connector

2.3.2 <External Connectors>

Connector Function Remark

USB_RJ45 1/2 2 x USB 3.0 connector for USB 2.0 Interface

COM1 + CRT COM1 Connect DB15 and analog VGA connector
COM 2/3 Serial port connector
PS/2 PS/2 keyboard and mouse connector
AUDIO Audio connector
SPDIF SPDIF digital audio output connector

204 -pin DDR3 SO-DIMM socket

24-pin power input connector ATX P/S Mode
24-pin power output connector

14-pin front panel switch/indicator
connector

and 1 x RJ45 LAN connector

DC_Input Mode

13-

-

LV-67L User’s Manual

2.4 <Memory Setup>

2.4.1 <Memory Setup>

The board provides 2 x 204-pin DDR3 SO-DIMM to support 1066/1333/1600MHz DDR3
memory module.

1 x DDRIII SO-DIMM 1066/1333 MHz up to 4GB. (LV-67LNB)
2 x DDRIII SO-DIMM 1066/1333 MHz up to 16GB. (LV-67LBU)

Support Non-ECC, unbuffered memory only.

SO-DIMM2

14-

-

SO-DIMM1

LV-67L User’s Manual

2.5 <CMOS & ATX Setup>

The board’s data of CMOS can be setting in BIOS. If the board refuses to boot due
to inappropriate CMOS settings, here is ho w to proceed to clear (reset) the CMOS
to its default values.

Jumper: JRTC
Type: Onboard 3-pin jumper

JRTC Mode

1-2 Clear CMOS
2-3 Normal Operation

Default setting: 2-3

Jumper: JAT
Type: onboard 3-pin jumper

JAT Mode

1-2 AT Mode
2-3 ATX Mode

Default setting:2-3

JAT

1
3
1
3

15-

-

LV-67L User’s Manual

2.6 <Serial ATA Interface>

Based on Intel PCH, the board provides two Serial ATAIII(SATA Port1/2) interfaces with
up to 600MB/s of transfer rate and four Serial ATAII(SATA Port3/4/5/6) interfaces with
up to 300MB/s of transfer rate.

SATA6 SATA3
SATA5 SATA2
SATA4 SATA1

2.7 <Ethernet Interface>

The board integrates with one Intel 82574L Gigabit Ethernet & one Intel 82579LM
controllers, as the PCI Express bus. The Intel 82574L & 82579LM supports triple speed
of 10/100/1000Base-T, with IEEE802.3 compliance and Wake-On-LAN supported.

RJ45 LAN connector

82574L 82579LM

16-

-

LV-67L User’s Manual

2.8 <Onboard Display Interface>

Based on Intel Sandy Bridge CPU with built-in HD Graphic, the board provides one
DB15 connector on real external I/O port, one 40-pin LVDS interface with 5-pin LCD
backlight inverter connector and provides 20-pin DVI interface.
The board provides dual display function with clone mode and extended desktop mode
for CRT, LCD and DVI.

2.8.1 <Analog Display>

Please connect your CRT or LCD monitor with DB15 male connector to the onboard
DB15 female connector on rear I/O port .

CRT

17-

-

LV-67L User’s Manual

2.8.2 <Digital Display>

The board provides one 40-pin LVDS connector for 24-bit single/dual channel panels,
supports up to 2048 x 1536 (UXGA) resolution, with one LCD backlight inverter
connector and one jumper for panel voltage setting.

40

39

CN_LVDS

2

1

5

1

5 1

6 2
JVLCD

Effective patterns of connection: 1-2 / 3-4 / 5-6

5

6

3

4

1

2

Warning: others cause damages

18-

-

LV-67L User’s Manual

Connector: CN_INV Connector: JVLCD
Type: 5-pin LVDS Power Header Type: 6-pin Power select Header

Pin Description

1 +12V
2 Reserved (Note)
3 GND
4 GND
5 ENABKL

Note: Reserved for MB internal test

Please treat it as NC.

Connector: CN_LVDS
Type: onboard 40-pin connector for LVDS connector
Connector model: HIROSE DF13-40DP-1.25V

Pin Signal Pin Signal

2 LCDVCC 1 LCDVCC
4 GND 3 GND
6 ATX0- 5 BTX0-

8 ATX0+ 7 BTX0+
10 GND 9 GND
12 ATX1- 11 BTX1­14 ATX1+ 13 BTX1+
16 GND 15 GND
18 ATX2- 17 BTX2­20 ATX2+ 19 BTX2+
22 GND 21 GND
24 ACLK- 23 BTX3­26 ACLK+ 25 BTX3+
28 GND 27 GND
30 ATX3- 29 BCLK­32 ATX3+ 31 BCLK+
34 GND 33 GND
36 DDCPCLK 35 SMBCKL
38 DDCPDATA 37 SMBDATA
40 N/C 39 SPDIFO

Pin Description

1-2 LCDVCC (3.3V)
3-4 LCDVCC (5V)
5-6 LCDVCC (12V)

Default: 1-2

-

19-

LV-67L User’s Manual

To setup the LCD, you need the component below:

1. A panel with LVDS interfaces.

2. An inverter for panel’s backlight power.

3. A LCD cable and an inverter cable.

For the cables, please follow the pin assignment of the c onnec tor to make a c able, becaus e
every panel has its own pin assignment, so we do not provide a standard cable; please find
a local cable manufacture to make cables.

LCD Installation Guide:

1. Preparing the LV-67L, LCD panel and the backlight inverter.

2. Please check the datasheet of the panel to see the voltage of the panel, and set
the jumper JVLCD to +12V or +5V or +3.3V.

3. You would need a LVDS type cable.

Panel side

For sample illustrator only

4. To connect all of the devices well.

-

20-

Board side

LV-67L User’s Manual

After setup the devices well, you need to select the LCD panel type in the BIOS.

The panel type mapping is list below:

BIOS panel type selection form (BIOS Version:1.0)

Single / Dual channel Single / Dual channel

NO. Output format NO. Output format

1 640 x 480 9 1680 x 1050
2 800 x 600 10 1920 x 1200
3 1024 x 768 11 1440 x 900
4 1280 x 1024 12 1600 x 900
5 1400 x 1050 Reduced Blanking 13 800 x 480
6 1400 x 1050 non-Reduced Blanking 14 1280 x 800
7 1680 x 1200 15 1920 x 1080
8 1366 x 768 16 OEM keep

21-

-

LV-67L User’s Manual

2.8.3 <DVI Interface>

The board provides one 20-pin DVI connector,
supports up to 1920 x 1080 resolution.
Connector: CN_DVI/DP

Type: onboard 20-pin connector for DVI connector
Connector model: HIROSE DF13-20DP-1.25V

Pin Number Assignment Pin Number Assignment

1 +5V 2 +3.3V
3 HPD 4 Ground
5 TMDSTX0N 6 TMDSTX0P
7 Ground 8 TMDSTX1N

9 TMDSTX1P 10 Ground
11 TMDSTX2N 12 TMDSTX2P
13 Ground 14 TMDSTXCN
15 TMDSTXCP 16 Ground
17 DVI_DA 18 DVI_SL
19 AUXN 20 AUXP

2 1

20 19

CN_DVI/DP

22-

-

LV-67L User’s Manual

2.9 <Integrated Audio Interface>

The board integrates onboard audio interface with REALTEK ALC888 code, with Intel
next generation of audio standard as High Definition Audio, it offers more vivid sound
and other advantages than former HD audio compliance.
The main specifications of ALC888 are:

z High-performance DACs with 100dB S/N ratio
z 2 DAC channels support 16/20/24-bit PCM format for 2 audio solution
z 16/20/24-bit S/PDIF-OUT supports 44.1K/48K/96kHz sample rate
z Compatible with HD
z Meets Microsoft WHQL/WLP 2.0 audio requirements

The board provides 2 channels audio phone jacks on rear I/O port, Line-in/MIC-in ports
for front I/O panel through optional cable.

9

10
CN_AUDIO

1

2

CDIN

1

4

LINE-IN
LINE-OUT
MIC-IN

Rear I/O phone jacks

23-

-

LV-67L User’s Manual

Connector: CN_AUDIO

9 1

Type: 10-pin (2 x 5) header (pitch = 2.54mm)

10

Pin Description Pin Description

1 MIC_L 2 Ground
3 MIC_R 4 N/C
5 Speaker_R 6 MIC Detect
7 SENSE 8 N/C
9 Speaker_L 10 Speaker Detect

Connector: CDIN

1

Type: 4-pin header (pitch = 2.54mm)

Pin Description

4

1 CD – Left
2 Ground
3 Ground
4 CD – Right

2

24-

-

LV-67L User’s Manual

2.10 <USB Interface>

LV-67L integrates ten USB2.0 ports.

The specifications of USB2.0 are listed below:

Interface USB2.0

Controller

Transfer Rate Up to 480Mb/s

Voltage 5V

Intel®HM65

Type: USB2.0

CN_USB3/4/5

Type: USB2.0

10

1

9

2

25-

-

LV-67L User’s Manual

Connector: CN_USB3/4/5
Type: 10-pin (2 x 5) header (pitch = 2.54mm)

Pin Description Pin Description

1 VCC (5V_SB/ 5V) 2 VCC (5V_SB/ 5V)
3 Data0- 4 Data1­5 Data0+ 6 Data1+
7 Ground 8 Ground
9 Ground 10 N/C

JVUSB
1 2

5 6

Connector: JVUSB
Type: 6-pin Power select jumper

Pin Description

1-3 & 2-4 5V_SB
3-5 & 4-6 5V

Default: 1-3 & 2-4

Effective patterns of connection: 1-3 & 2-4 or 3-5 & 4-6

1

5

Warning: others cause damages

2

6

1

5

2

6

26-

-

LV-67L User’s Manual

2.11 <Serial Port>

The board supports Three RS232 serial port and one jumper selectable
RS232/422/485 serial ports. The jumper JCSEL1 & JCSEL2 can let you configure
the communicating modes for COM2.

Connector: COM1/3
Type: 9-pin D-sub male connector on bracket for COM1/3

Pin Description Pin Description

1 DCD 2 RXD
3 TXD 4 DTR
5 GND 6 DSR
7 RTS 8 CTS
9 RI 10 N/C

Connector: COM2

Type: 9-pin D-sub male connector on bracket for COM2

Pin Description Pin Description

1 DCD/422TX-/485- 2 RXD/422TX+/485+
3 TXD/422RX+ 4 DTR/422RX­5 GND 6 DSR
7 RTS 8 CTS
9 RI 10 N/C

Setting RS-232 & RS-422 & RS-485 for COM2

COM1 COM3

COM2

27-

-

LV-67L User’s Manual

JP4

COM4

COM5/6

2

1

5 6

1 2

10 9
2

1

19 20

JP3

5 1

6 2

11

12

JCSEL1

JP1

5 1

1

6 2

2

JP2

5 1

6 2

JCSEL2
7 1

8

2

28-

-

LV-67L User’s Manual

Function JCSEL2 JCSEL1

IrDA

RS-422

RS-485

RS-232

Default setting:

JCSEL1: (1-3, 2-4, 7-9, 8-10) JCSEL2: (1-2)

Jumper: JP1/JP2/JP3/JP4 (COM1/2/3/4)
Type: onboard 6-pin header

7

1

8

2

7

1

2 8

1

7

8

2

7

1

8

2

11

12
11

12

11

12

11

12

1

2

1

2

1

2

1

2

Power Mode JP1/2/3/4

Pin 9 with 5V Power 1-2

Pin 9 with 12V Power 3-4

Standard COM port 5-6

Default setting

-30-

LV-67L User’s Manual

2.12 <PCIE Mini Card and SIM Interface>

The board provides two PCIE mini card sockets and a SIM socket.

MINI_CARD1 is the first Mini-PCIe slot for long size Mini-PCIe cards.
Please be noted that the MPX-SDVOD card must be placed in this slot. The
MPX-SDVOD card will not work if it is placed in other slot.
Please also be noted that this slot is the only slot for MPX-SDVOX card but a
customized BIOS is needed for the MPX-SDVOX card. Please contact Commell for
customized BIOS for your MPX-SDVOX card.

MINI_CARD2 is the second Mini-PCIe slot for long size Mini-PCIe cards.
However, if you are trying to use 3G Mini-PCIe card with a SIM card then place your 3G
Mini-PCIe card in this slot and put your SIM card into the SIM card socket beneath this
MINI_CARD2 support 3G PCIE Mini card with SIM.
MINI_CARD2 slot and option support mSATA.

MINI_CARD2

5
6
7

MINI_CARD1

1
2
3

SIMM

30-

-

LV-67L User’s Manual

Connector: SIMM
Type: 6-pin SIM socket

Pin Description Pin Description

1 SIMVCC 2 SIMRST
3 SIMCLK 4 NC
5 GND 6 SIMVPP
7 SIMDATA

31-

-

LV-67L User’s Manual

2.12.1 <SIM Step>

Step1.

SIM card holder is marked by circle.
Slide the cap toward OPEN direction.

Step 2.

Make sure that the cap is now at the OPEN position.

Step 3.

Flip the cap up for inserting a SIM card into.

32-

-

LV-67L User’s Manual
Step 4.

Insert a SIM card as shown in the photo.
Be sure that the corner cut is on top and the golden pads are up.

Step 5.

Now, flip down the cap as shown in the photo.

Step 6.

Press down and slide the cap to the CLOSE position.
Be sure that the cap is tightly held with the socket.

33-

-

LV-67L User’s Manual

2.13 <GPIO and SMBUS Interface>

The board provides a programmable 8-bit digital I/O interface; you can use this general
purpose I/O port for system control like POS or KIOSK.

Connector: CN_DIO
Type: 12-pin (6 x 2) header (pitch = 2.0mm)

Pin Description Pin Description

1 Ground 2 Ground
3 GP10 4 GP14
5 GP11 6 GP15
7 GP12 8 GP16
9 GP13 10 GP17
11 5V 12 12V

Connector: CN_SMBUS
Type: 5-pin header for SMBUS Ports

Pin Description

1 VCC
2 N/C
3 SMBDATA
4 SMBCLK
5 Ground

5

CN_SMBUS

1

1

2

CN_DIO

34-

-

11

12

LV-67L User’s Manual

2.14 <Power Supply and Fan Interface >

2.14.1 <Power Input>

The board requires onboard 4-pin DC-input connector voltage range is from 9V to 24V,
or onboard 24-pin ATX2.0, for the input current, please take a reference of the power
consumption report on appendix.

Connector: DC_IN
Type: 4-pin DC power connector

Pin Description Pin Description

1 Ground 2 Ground
3 +9~+24V 4 +9~+24V

Connector: ATX (It also can become Output when DC-IN be used)
Type: 24-pin ATX power connector

PIN assignment

1 3.3V 13 3.3V
2 3.3V 14 -12V
3 GND 15 GND
4 5V 16 -PSON
5 GND 17 GND
6 5V 18 GND
7 GND 19 GND
8 PW_OK 20 N/C

9 5V_SB 21 5V
10 12V 22 5V
11 12V 23 5V
12 3.3V 24 GND

1
3
12

1

2

DC_IN

4

24

ATX

13

35-

-

LV-67L User’s Manual

2.14.2 <Power Output>

The board provides one 24-pin ATX connector for +5V/+12V output for powering your
HDD, CDROM or other devices.

Attention: When DC-IN had power supplied, the ATX become output !

Avoid DC-IN and ATX power supply input at the same time !

Connector: ATX (When DC-IN be used)
Type: 24-pin ATX connector for +5V/+12V Output

PIN assignment

1 * 13 *
2 * 14 *
3 * 15 *
4 5V 16 *
5 GND 17 *
6 * 18 GND
7 GND 19 GND
8 * 20 *

9 * 21 *
10 12V 22 5V
11 12V 23 5V
12 * 24 *

Note: Maximum output voltage: 12V/2A & 5V/3A

36-

-

LV-67L User’s Manual

2.14.3 <Fan connector>

The board provides one 4-pin fan connectors supporting smart fan for CPU cooler and
one 3-pin cooler fan connectors for system.

3 1
SYSFAN

Connector: CPUFAN
Type: 4-pin fan wafer connector

Pin Description Pin Description

1 Ground 2 +12V
3 Fan Speed Detection 4 Fan Control

Connector: SYSFAN
Type: 3-pin fan wafer connector

Pin Description Pin Description Pin Description

1 Ground 2 +12V 3 Sense

1

CPUFAN

4

37-

-

LV-67L User’s Manual

2.15 <Switch and Indicator>

The JFRNT provides front control panel of the board, such as power button, reset and
beeper, etc. Please check well before you connecting the cables on the chassis.

Connector: JFRNT
Type: onboard 14-pin (2 x 7) 2.54-pitch header

Function Signal PIN Signal Function

IDE LED

Reset

Power
Button

HDLED+ 1 2 PWRLED+

PWRBT+ 11 12 N/C

PWRBT- 13 14 SPK-

HDLED- 3 4 N/C

Power

LED

Reset+ 5 6 PWRLED-

Reset- 7 8 SPK+

N/C 9 10 N/C

Speaker

1 2

JFRNT

13 14

-

38-

LV-67L User’s Manual

Chapter 3 <System Setup>

3.1 <Audio Configuration>

The board integrates Intel® HM65 with REALTEK® ALC888 code. It can support
2-channel sound under system configuration. Please follow the steps below to setup
your sound system.

1. Install REALTEK HD Audio driver.

2. Lunch the control panel and Sound Effect Manager.

3. Select Speaker Configuration

39-

-

LV-67L User’s Manual

3.2 <Display Properties Setting>

Based on Intel HM65 with HD Graphic, the board supports two DACs for display device
as different resolution and color bit.
Please install the Intel Graphic Driver before you starting setup display devices.

1. Click right button on the desktop to lunch display properties

2. Click Advanced button for more specificity setup.

Click Graphics Properties... for
advanced setup

40-

-

LV-67L User’s Manual

3. This setup options can let you define each device settings.

Click Monitor to setup the CRT
monitor for Resolution and
Refresh Rate

Click Intel® Dual Display

Clone to setup the dual

display mode as same screen

41-

-

LV-67L User’s Manual

Chapter 4 <BIOS Setup>

The motherboard uses the Phoenix BIOS for the system configuration. The Phoenix
BIOS in the single board computer is a customized version of the industrial standard
BIOS for IBM PC AT-compatible computers. It supports Intel x86 and compatible CPU
architecture based processors and computers. The BIOS provides critical low-level
support for the system central processing, memory and I/O sub-systems.

The BIOS setup program of the single board computer let the customers modify the basic

configuration setting. The settings are stored in a dedicated battery-backed memory,
NVRAM, retains the information when the power is turned off. If the battery runs out of
the power, then the settings of BIOS will come back to the default setting.

The BIOS section of the manual is subject to change without notice and is provided h ere

for reference purpose only. The settings and configurations of the BIOS are current at
the time of print, and therefore they may not be exactly the same as that displayed on
your screen.

To activate CMOS Setup program, press ＜DEL＞ key immediately after you turn on the

system. The following message “Press DEL to enter SETUP” should appear in the lower
left hand corner of your screen. When you enter the CMOS Setup Utility, the Main Menu
will be displayed as Figure 4-1. You can use arrow keys to select your function, press
＜Enter＞ key to accept the selection and enter the sub-menu.

Figure 4-1 CMOS Setup Utility Main Screen

42-

-

LV-67L User’s Manual

(This page is left for blank)

-

43-

LV-67L User’s Manual

jump

”

Appendix A <I/O Port Pin Assignment>

A.1 <Serial ATA Port>

Connector: SATA1/2/3/4/5/6
Type: 7-pin wafer connector

1 2 3 4 5 6 7

GND RSATA_TXP1 RSATA_TXN1 GND RSATA_RXN1 RSATA_RXP1 GND

7 1

A.2 <IrDA Port>

Connector: CN_IR
Type: 5-pin header for SIR Ports

Pin Description

1 VCC
2 N/C
3 IRRX
4 Ground
5 IRTX

A.3 <VGA Port>

Connector: CRT
Type: 15-pin D-sub female connector on bracket

Pin Description Pin Description Pin Description

1 RED 6 Ground 11 N/C
2 GREEN 7 Ground 12 DDCDA
3 BLUE 8 Ground 13 HSYNC
4 N/C 9 N/C 14 VSYNC
5 Ground 10 Ground 15 DDCCLK

JCSEL1 must

1

5

to “SIR

6

1
2
3
4
5

10

11
12
13
14
15

A.4 <LAN Port>

Connector: RJ45
Type: RJ45 connector with LED on bracket

8 1

Pin 1 2 3 4 5 6 7 8

Description MI0+ MI0- MI1+ MI2+ MI2- MI1- MI3+ MI3-

-

44-

LV-67L User’s Manual

A.5 <LAN LED Port>

Connector: JSPD1/2
Type: 5-pin header for LAN Speed LED connector

When Lan speed 10/100Mbps

Pin Description

1 LED­2 LED+

When Lan speed 1Gbps

Pin Description

1 LED+
2 LED-

Connector: JATC1/2
Type: 5-pin header for LAN Activity LED connector

Pin Description

1 LED­2 LED+

-

45-

LV-67L User’s Manual

Appendix B <Flash BIOS>

B.1 <Flash Tool>

The board is based on Phoenix BIOS and can be updated easily by the BIOS auto
flash tool. You can download the tool online at the address below:

http://www.phoenix.com/en/home/
http://www.commell.com.tw/Support/Support_SBC.htm

File name of the tool is “Phlash.exe”, it’s the utility that can write the data into the
BIOS flash ship and update the BIOS.

B.2 <Flash BIOS Procedure>

1. Please make a bootable floppy disk.

2. Get the last .bin files you want to update and copy it into the disk.

3. Copy Pflash.exe to the disk.

4. Power on the system and flash the BIOS.
(Example: C:/Pflash XXX.bin /bbl /cvar /sa)

5. Restart the system.

Any question about the BIOS re-flash please contact your distributors or visit the
web-site at below:

http://www.commell.com.tw/support/support.htm

UT

46-

-

LV-67L User’s Manual

Appendix C <Programming GPIO’s>

The GPIO’can be programmed with the MSDOS debug program using
simple IN/OUT commands.The following lines show an example how to
do this.

GPIO0…..GPIO7 bit0……bit7

-o 2 E 87 ;enter configuration

-o 2E 87

-o 2E 07

-o 2F 09 ;enale GPIO function

-o 2E 30

-o 2F 02 ;enable GPIO configuration

-o 2E F0

-o 2F xx ;set GPIO as input/output; set ‘1’ for input,’0’for
output

-o 2E F1

-o 2F xx ;if set GPIO’s as output,in this register its value can
be set

Optional :

-o 2E F2

-o 2F xx ; Data inversion register ; ‘1’ inverts the current valus
of the bits ,’0’ leaves them as they are

-o 2E 30

-o 2F 01 ; active GPIO’s

For further information, please refer to Winbond W83627DHG-P datasheet.

47-

-

LV-67L User’s Manual

Appendix D <Programming Watchdog Timer >

The watchdog timer makes the system auto-reset while it stops to work for a period.
The integrated watchdog timer can be setup as system reset mode by program.

Timeout Value Range

- 1 to 255

- Second or Minute

Program Sample

Watchdog timer setup as system reset with 5 second of timeout

2E, 87
2E, 87
2E, 07
2F, 08 Logical Device 8
2E, 30 Activate
2F, 01
2E, F5 Set as Second*
2F, 00
2E, F6 Set as 5
2F, 05

* Minute: bit 3 = 1; Second: bit 3 = 0

You can select Timer setting in the BIOS, after setting the time options, the system
will reset according to the period of your selection.

48-

-

LV-67L User’s Manual

Contact Information

Any advice or comment about our products and service, or
anything we can help you please don’t hesitate to contact with us.
We will do our best to support you for your products, projects and
business.

Taiwan Commate Computer Inc.

19F., No.94, Sec. 1, Xintai 5th Rd., Xizhi Dist., New Taipei

Address

TEL [phone]
FAX [phone]

City 22102, Taiwan

Website

E-Mail

Facebook

Twitter https://twitter.com/Taiwan_Commate

TUhttp://www.commell.com.twUT
[e-mail] (General Information)

[e-mail] (Technical Support)

https://www.facebook.com/pages/Taiwan-Commate-Computer-Inc/547993955271899

Commell is a brand name of Taiwan commate computer Inc.

49-

-