COMMELL LV-670LVDS User Manual

Page 1

LV-670 series

User’s Manual

Edition 1.4

Copyright© 2002, 2003. All rights reserved. This document is copyrighted and all rights are reserved. The information in this document is subject to change without prior notice to make improvements to the products. This document contains proprietary information and protec ted by copyright. No part of this document may be reproduced, copied, or translated in any form or any means without prior written permission of the manufacturer. All trademarks and/or registered trademarks contains in this document are property of their respective owners.

Disclaimer

Taiwan Commate Computer Inc. shall not be liable for any incidental or consequential damages resulting from the performance or use of this product. Taiwan Commate Computer Inc. does not issue a warranty of any kind, express or implied, including without limitation implied warranties of merchantability or fitness for a particular purpose. The company has the right to revise the manual or include changes in the specifications of the product described within it at any time without notice and without obligation to notify any person of such revision or changes.

Trademark

All trademarks are the property of their respective holders.

Any question please visit our website at http://www.commell.com.tw

LV-670 series User’s Manual

Page 2

Packing List

LV670 :

Hardware

LV-670 Motherboard......................................................... X 1

Cable Kit

40-pin ATA100 IDE Flat Cable.......................................... X 1

34-pin Floppy Cable.......................................................... X 1

Dual-USB Port Cable........................................................ X 1

DB9 COM Port Cable........................................................ X 1

Audio Cable.……………………………………………………… X 1 I/O Shield………………………………………………………… X 1

Printed Matter and Software

Driver CD (Including User’s Manual)................................. X 1

LV670LVDS :

Hardware

LV-670LVDS Motherboard................................................ X 1

Cable Kit

40-pin ATA100 IDE Flat Cable.......................................... X 1

34-pin Floppy Cable.......................................................... X 1

Dual-USB Port Cable........................................................ X 1

DB9 COM Port Cable........................................................ X 1

Audio Cable.……………………………………………………… X 1 I/O Shield………………………………………………………… X 1

Printed Matter and Software

User’s Manual................................................................... X 1

Driver CD.......................................................................... X 1

LV-670 series User’s Manual

Page 3

Table of Content

CHAPTER 1. INTRODUCTION............................................................5

1.1 P

1.2 S

1.3 C

1.4 B

RODUCT OVERVIEW................................................................5

PECIFICATION.........................................................................6

OMPONENT PLACEMENT .........................................................9

LOCK DIAGRAM ....................................................................10

CHAPTER 2. HARDWARE SETUP ................................................... 11

2. 1 C

2.1.1

ONNECTOR LOCATION...........................................................11

Jumper Reference..................................................................13

2.1.2 Connector Reference ............................................................14

2.2 CPU AND DRAM SETTING .....................................................15

2.3 CMOS S

2.4 W

2.5 E

2.6 P

ATCHDOG TIMER SETTING....................................................16

MBEDDED SOLID STATE DISK ................................................17

OWER AND FAN CONNECTOR.................................................18

2.7 VGA I

2.7.1 Analog VGA Interface

ETTING.....................................................................15

NTERFACE.....................................................................19

............................................................19

2.7.2 Digital VGA Interface (LV-670LVDS only)...........................20

2.8 ETHERNET INTERFACE............................................................22

2.9 A

2.10 S

UDIO INTERFACE...................................................................23

WITCH AND INDICATOR ..........................................................25

CHAPTER 3. BIOS SETUP................................................................27

CHAPTER 4 AUDIO CHANNEL CONFIGURATION.........................29

CHAPTER 5. DISPLAY SETTINGS...................................................31

LV-670 series User’s Manual

Page 4

APPENDIX. A I/O PORT PIN ASSIGNMENT.....................................35

A.1

IDE Port................................................................................... 35

A.2 Floppy Port.............................................................................. 37

A.3 Serial Port............................................................................... 37

A.4 USB Port................................................................................. 38

A.5 IrDA Port.................................................................................. 38

A.6 VGA Port................................................................................. 39

A.7 LAN Port.................................................................................. 39

APPENDIX B. FLASH THE BIOS......................................................41

B.1 BIOS A B.2 F

UTO FLASH TOOL........................................................41

LASH METHOD......................................................................41

APPENDIX C. SYSTEM RESOURCES .............................................43

C.1 I/O Port Address Map

............................................................ 43

C.2 Memory Address Map........................................................... 44

C.3 System IRQ and DMA Resource......................................... 45

CONTACT INFORMATION ...................................................................47

LV-670 series User’s Manual

Page 5

Chapter 1. Introduction

1.1 Product Overview

LV-670 series (Include LV-670 and LV-670LVDS) is an all-in-one

industrial compact Pentium 4 level motherboard based on Mini-ITX form factor at 170 x 170 mm of dimension. Based on Intel 845GV and ICH4 chipset, LV-670 series offers the compact, embedded, value and high performance solution with Intel Pentium 4 CPU, 533 / 400 MHz of FSB, 1 GBytes DDR200/266/333 SDRAM, Intel 845GV GMCH built-in Intel Extreme Graphics, Intel PRO/100+ LAN, Hi-Speed USB 2.0, IEEE 1394, 5.1 channel and S/P DIF 3D audio, TV-out and embedded flash disk interfaces.

Compact Mini-ITX Form Factor @ 170 x 170 mm

LV-670 series is based on the ultra compact mini-ITX form factor at onl y

170 x 170 mm of dimension, meets the demand of compact and powerful computing platform. With this feature, LV-670 series should be the ideal solution for the high-end, Pentium 4 level book-size, slim type and other embedded PC systems.

Powerful Pentium 4 Computing Platform

With Intel Socket 478 Pentium 4 / Celeron CPU at 533/400 MHz FSB and 1GBytes DDR200/266/333 SDRAM of system memory, LV-670 series offers the high-end industrial computing platform with low cost Intel integrated solutions.

Value / High Performance Multi-media Solution

The Intel 845GV GMCH chipset built-in Intel Extreme Graphics, 6 channel and S/P DIF AC97 3D audio make LV-670 series be the high performance but low cost multi-media AV platform. With this feature, LV-670 series should be the ideal solution for VoD (Video on Demand), DVR (Digital Video Recorder), digital video broadcasting (DVB), streaming, surveillance, compression (MPEG), interaction server, POS, Kiosk, ATM, Panel PC, transaction workstation and terminal applications.

Hi-Speed USB 2.0 and IEEE 1394 Interface

Intel ICH4 built-in Hi-Speed USB 2.0 controller and onboard IEEE 1394 chipset let LV-670 series offer up to 480 Mbps of Hi-Speed USB 2.0 and 100/200/400 Mbps of IEEE 1394 interfaces.

LV-670 series User’s Manual

Page 6

1.2 Specification

General Specification

Form Factor Mini-ITX at 170 x 170 mm (L x W) CPU Intel Socket 478 Pentium 4 / Celeron @ 533/400 MHz FSB

Support Northwood / Willamette Pentium 4 / Celeron CPU

Memory 1GBytes DDR200/266/333 SDRAM on one 184-pin DIMM

socket Chipset Intel 82845GV GMCH and 82801DB ICH4 BIOS Phoenix-Award 2Mb PnP flash BIOS Green Function Power saving mode includes doze, standby and suspend

modes. ACPI version 1.0 and APM version 1.2 compliant Watchdog Timer System reset programmable watchdog timer with 1 ~ 255

sec./min. of timeout value Real Time Clock Intel ICH4 built-in RTC with lithium battery Enhanced IDE PCI enhanced IDE interface supports dual channels and up

to 4 ATAPI devices at UltraATA/100

One 40-pin and one 44-pin IDE port

DiskOnModule (DOM) embedded flash disk up to 1GBytes Expansive Slot One PCI slot supports up to 2 bus master PCI bus interface

via the additional riser card

Multi-I/O Port

Chipset Intel 82801DB ICH4 (USB) and Winbond W83627HF-AW

LPC Super I/O controller Serial Port One internal RS-232 serial port with 16C550 compatible

UART and 16 bytes FIFO USB Port Four Hi-Speed USB 2.0 ports with 480 Mbps of data

transfer rate

Two external and two internal USB ports Parallel Port One external bi-direction parallel port with SPP/ECP/EPP

mode Floppy Port One FDD port supports up to two FDD IrDA Port One IrDA compliant Infrared interface supports CIR/SIR K/B & Mouse External PS/2 keyboard and mouse ports on rear I/O panel

LV-670 series User’s Manual

Page 7

VGA Display Interface

Chipset Intel 845GV GMCH built-in Intel Extreme Graphics

With 266 MHz VGA core and 256-bit 3D engine

Memory Intel dynamic video memory up to 64 Mbytes shared with

system

Display Type CRT, LCD monitor and analog display

Up to 4 textures / pixel on a single pass and 2048x2048

texture size

Connector External DB15 female connector on rear I/O panel

Internal 40-pin LVDS connector (LV-670LVDS only)

TV-out Interface

Chipset Intel 845GV GMCH built-in Intel Extreme Graphics with

Chrontel CH7011(for LV-670)

& CH7017A-T(for LV-670LVDS) TV-out encoder

TV Mode Support both of NTSC and PAL mode Connector External S-video and RCA Jack on rear I/O panel

Ethernet Interface

Chipset Intel PRO/100+ LAN interface with Intel ICH4 and 82562ET

Phy

Type 10Base-T / 100Base-TX, auto-switching Fast Ethernet

Full duplex, IEEE802.3U compliant

Connector External RJ45 connector with LED on rear I/O panel

Audio Interface

Chipset Intel ICH4 with Realtek ALC650 AC97 3D audio codec Interface 5.1 channel 3D audio with front (R/L), rear (R/L), center and

bass

S/P DIF digital audio encoding signal input and output

Line-in, line-out, CD-in and MIC-in

Connector External three phone jack for 5.1 channel audio on rear

panel

External S/P DIF connector on rear panel

Internal 10-pin header for line-in/-out, MIC-out, 4-pin header

for CD-in

LV-670 series User’s Manual

Page 8

IEEE1394 Interface

Chipset Agere FW323 PCI IEEE1394 controller Interface IEEE1394 with 100/200/400 Mbps of data transfer

bandwidth

Connector External IEEE1394 connector on rear I/O panel

Power and Environment

Power Requirement Dimension 170 (L) x 170 (H) mm, Mini-ITX form factor Temperature Operating within 0 ~ 60oC (32 ~ 140oF)

EMI CE/FCC class A certified

Ordering Code

LV-670 Mini-ITX Socket 478 Pentium 4 Motherboard

LV-670LVDS Same with LV-670 but support 24-bit dual channel LVDS

For further product information please visit the website at

http://www.commell.com.tw

20-pin ATX power connector Additional +12V on 4-pin connector for Pentium 4 PSU

Storage within -20 ~ 85

C (-4 ~ 185oF)

with Intel Extreme VGA, LAN, TV-out, 5.1-CH/SPDIF Audio, Hi-Speed USB 2.0, IEEE1394 Interface

LV-670 series User’s Manual

Page 9

1.3 Component Placement

LC650 AC97 Audio Codec

With 5.1 Channel Audio

S/P DIF, Line-in/out, Mic-in

and CD-in Interface

Chipset on Back Side

- Intel 82562ET LAN Phy

- Agere FW323 IEEE1394

Controller

Intel 82801DB ICH4

With Hi-Speed USB 2.0

UltraATA100 IDE

Intel PRO/100+ LAN Mac

LV-670 series User’s Manual

Intel 845GV GMCH

With 533 / 400 MHz Host Bus

200 / 266 /333 MHz Memory

Bus

Page 10

1.4 Block Diagram

Intel Socket 478 Pentium 4 / Celeron CPU

Intel 0.13-/0.18-micron Northwood / Willamette

Support Intel Hyper-Threading Technology

LCD

LVDS

CRT

LVDS

Encoder

FSB 400 / 533 MHz 100 / 133 MHz x 4

Intel 845G

GMCH

DDR266 DDR333

One 184-pin DIMM Sockets up to 1GBytes DDR SDRAM

ATAPI Device

USB Devices

LAN1

Audio Devices

AT Keyboard

PS/2 Mouse Floppy

Serial Device

UltraATA100 IDE

100 MBps

Hi-Speed USB 2.0

480 Mbps

PHY

Codec

SIO

LPC

PS/2 Keyboard

Parallel Device

Intel ICH4

PCI Bus Interface

LV-670 series User’s Manual

PCI Slot

IEEE1394

Page 11

Chapter 2. Hardware Setup

This chapter contains the information for installation of hardware. The install procedure includes jumper settings, CPU and memory installation, fan, I/O and panel connections.

2. 1 Connector Location

CPUFAN

PW1

JAUDIO

CDIN1

PW2

J1 PCI1 IDE2 IDE1

FLOPP

JIR1

JFRNT

CHASFAN

JWOL COM1

USB1

JKBV

CPU

DIMM1

JRTC

Printer LAN PH1

PS1 SVDIO1 RJACK1 VGA1 USRJ1 P1 RJACK2

LV-670 series User’s Manual

Page 12

CPUFAN

PW1

JAUDIO

CDIN1

PW2

PCI1 IDE2 IDE1

FLOPP

JIR1

JFRNT

CHASFAN

J3 J4 CONLCD

CPU

DIMM1

JRTC

JWOL COM1

USB1

Printer LAN PH1

PS1 SVDIO1 RJACK1 VGA1 USRJ1 P1 RJACK2

LV-670 series User’s Manual

Page 13

2.1.1 Jumper Reference

LV-670

Jumper Function

JRTC COMS Operate / Clear Setting JKBV Keyboard +5V / +5VSB Voltage Setting J1 IEEE1394 Enable/Disable Setting J2 S/P DIF Input / Output Setting

LV-670LVDS

Jumper Function

JRTC COMS Operate / Clear Setting J1 IEEE1394 Enable/Disable Setting J2 S/P DIF Input / Output Setting J3 Panel Voltage Setting

Jumper Setting Quick Reference

Jumper 1-2 2-3 JRTC Clean CMOS JKBV KB with +5V KB with +5VSB J1 IEEE1394 Enable IEEE1394 Disable J2 S/P DIF Output S/P DIF Input J3 +5V +3.3V Default setting

Normal Operation

LV-670 series User’s Manual

Page 14

2.1.2 Connector Reference

Internal Onboard Connector

Connector Function Remark

CPU MicroPGA478 478 CPU Socket Standard DIMM1 184-pin DIMM Socket Standard IDE1 40-pin Primary IDE Port Standard IDE2 44-pin Secondary IDE Port Standard FDC1 34-pin FDD Port Standard JCOM1 10-pin COM1 RS-232 Serial Port Standard USB1 10-pin 3rd / 4th Hi-Speed USB 2.0 Port Standard JIR1 10-pin CIR / SIR IrDA Port Standard PW1 20-pin ATX Power Connector Standard PW2 4-pin Additional +12V Power Connector Standard JFRNT 14-pin Switch and Indicator Connector Standard CPUFAN 3-pin +12V CPU Fan Connector Standard CHASFAN 3-pin + 12V System Fan Connector Standard JAUDIO 10-pin Audio Port Standard CDIN 4-pin CD-in Interface Standard WOL1 3-pin Wake-On-LAN Interface Standard CONLCD 40-pin LVDS connector 670LVDS only J4 5-pin LCD Inverter Power Connector 670LVDS only

External Connector on Bracket

Connector Function Remark

PS1 PS2 Keyboard / Mouse 6-pin Connector Standard Printer Parallel Port DB25 Female Connector Standard SVDIO1 S-Video TV-out Connector Standard RJACK1 AV TV-out RCA Jack Standard VGA1 VGA DB15 Female Connector Standard LAN LAN RJ45 Connector with LED Standard USRJ1 Dual USB Connector Standard P1 IEEE1394 Connector Standard PH1 Audio RCA Connector Standard RJACK2 S/P DIF Digital Audio Connector Standard

LV-670 series User’s Manual

Page 15

2.2 CPU and DRAM Setting

The board is based on Intel Socket 478 architecture with Intel 845G chipset, supports Intel Socket 478 Pentium 4 / Celeron CPU at 533/400 MHz FSB.

System memory of this board supports up to 1GBytes DDR200/266/333 SDRAM on two 184-pin DIMM sockets. Please notices that Intel 845G GMCH DOESN’T support ECC and register DIMM.

2.3 CMOS Setting

The board’s data of CMOS can be setting in BIOS. If the board refuses to boot due to inappropriate CMOS settings, here is how to proceed to clear (reset) the CMOS to its default values.

Jumper: JRTC Type: onboard 3-pin header

JRTC Mode

1-2 Clear CMOS 2-3 Normal Operation

Default setting

JRTC

LV-670 series User’s Manual

Page 16

2.4 Watchdog Timer Setting

The watchdog timer makes the system auto-reset while it stop to work for a period. The integrated watchdog timer can be setup as system reset mode by program.

Timeout Value Range

- 1 to 255

- Second or Minute

Program Sample

Watchdog timer setup as system reset with 5 second of timeout

2E, 87 2E, 87 2E, 07 2F, 08 Logical Device 8 2E, 30 Activate 2F, 01 2E, F5 Set as Second* 2F, 00 2E, F6 Set as 5 2F, 05

* Minute: bit 3 = 0; Second: bit 3 = 1

LV-670 series User’s Manual

Page 17

2.5 Embedded Solid State Disk

The LV-670 series supports the IDE-based, bootable and driver free

DiskOnModule (DOM) embedded flash disk. The onboard 40-pin IDE1 and

44-pin IDE2 box header supports normal DOM (DiskOnModule) or M-

systems DiskOnChip IDE Pro flash disk with or without the additional Vcc

power cable.

LV-670 series User’s Manual

Page 18

2.6 Power and Fan Connector

PW2

31 42

PW1

10 20

Connector: PW2 Type: 4-pin standard Pentium 4 additional +12V power connector

Pin Description Pin Description 1 Ground 2 Ground

3 +12V 4 +12V

Connector: PW1 Type: 20-pin ATX power connector

PIN assignment

1 3.3V 11 3.3V 2 3.3V 12 -12V 3 GND 13 GND 4 5V 14 PS_ON 5 GND 15 GND 6 5V 16 GND 7 GND 17 GND 8 PW_OK 18 -5V 9 5V_SB 19 5V

10 12V 20 5V

Connector: CPUFAN, SYSFAN Type: 3-pin fan wafer connector

Pin Description Pin Description Pin Description 1 Ground 2 +12V 3 Fan Control

CPUFAN

123

SFAN

LV-670 series User’s Manual

Page 19

2.7 VGA Interface

2.7.1 Analog VGA Interface

The board is integrated with Intel 845G GMCH chipset built-in Intel Extreme Graphics with 266 MHz VGA core, 256-bit 3D engine and Intel Dynamic Video Memory up to 64MBytes shared with system memory. The CRT / analog VGA interface includes one external DB15 female connector on bracket on board.

VGA

LV-670 series User’s Manual

Page 20

2.7.2 Digital VGA Interface (LV-670LVDS only)

The board’s digital video interface provides LVDS flat panel. The built-in 40-bit dual channel LVDS interface offers the economical solution for LVDS-based LCD display.

Connector: J4 Connector: J3 Type: 5-pin LVDS Power Header Type: 3-pin Power select Header

Pin Description Pin Description 1 ENABKL 1 VCC 2 GND 2 GND 3 GND 3 VCC3 4 GND 5 +12V

CONLCD

1 5

LV-670 Series User’s Manual

Page 21

Connector: CONLCD

Type: onboard 40-pin connector for LVDS connector

Pin Signal Pin Signal

2 LCDVCC 1 LCDVCC 4 GND 3 GND 6 ATX0- 5 BTX0-

8 ATX0+ 7 BTX0+ 10 GND 9 GND 12 ATX1- 11 BTX114 ATX1+ 13 BTX1+ 16 GND 15 GND 18 ATX2- 17 BTX220 ATX2+ 19 BTX2+ 22 GND 21 GND 24 ATXC- 23 BTX326 ATXC+ 25 BTX3+ 28 GND 27 GND 30 ATX3- 29 BTXC32 ATX3+ 31 BTXC+ 34 GND 33 GND 36 PANELCLK 35 PANELCLK 38 PANELDATA 37 PANELDATA 40 HPD 39 HPD

LV-670 Series User’s Manual

Page 22

2.8 Ethernet Interface

The LV-670 se ries is integrated with Intel PRO/100+ Fast Ethernet interf ace at the type of 10Base-T/100Base-TX auto-switching Fast Ethernet with full duplex and IEEE 802.3U compliant. The LV-670 series LAN interface is controlled by the Intel 82801DB ICH4 and 82562ET PHY, and connect with the external RJ45 connector on rear I/O panel.

CN_WOL

1 2 3

Connector: CN_WOL Type: onboard 3-pin (1 x 3) wafer connector

Pin 1 2 3 Description WOL-Ctrl Ground +5V Standby

LAN

LV-670 Series User’s Manual

Page 23

2.9 Audio Interface

The LV-670 series offers the AC97 3D audio with 5.1-channel and S/P DIF interface based on Intel ICH4 and Realtek ALC650 codec.

JAUDIO

CDIN

1234

Red: Center / Mic-in Blue: Rear / Line-in Green: Front / Line-out

LV-670 Series User’s Manual

Page 24

Connector: JAUDIO

Type: 10-pin (2 x 5) 2.54-pitch header

Pin Description Pin Description 1 Line – Right 2 Ground

3 Line – Left 4 MIC 5 MIC 6 Ground 7 N/C 8 Line Out – Left 9 Line Out – Right 10 Ground

Jumper: J2

Type: onboard 3-pin header

J2 Mode

1-2 S/P DIF Output 2-3 S/P DIF Input

Default setting

Connector: CDIN

Type: 4-pin header

Pin Description 1 CD – Left

2 Ground 3 Ground 4 CD – Right

LV-670 Series User’s Manual

Page 25

2.10 Switch and Indicator

Connector: JFRNT Type: onboard 14-pin (2 x 7) 2.54-pitch header

Function

Signal PIN Signal Function

JFRNT

14 13

IDE LED

Reset

N/C 9 10 N/C

Button

LV-670 Series User’s Manual

Vcc (+) 1 2 (+) Vcc

Active 3 4 N/C

Reset 5 6 GND

GND 7 8 Vcc

PWRBT 11 12 N/C Power

GND 13

14 SPKIN

Power

LED

Speaker

Page 26

Notes (This page left blank intentionally)

LV-670 Series User’s Manual

Page 27

Chapter 3. BIOS Setup

The single board computer uses the Award BIOS for the system configuration. The Award BIOS in the single board computer is a customized version of the industrial standard BIOS for IBM PC AT-compatible computers. It supports Intel x86 and compatible CPU architecture based processors and computers. The BIOS provides critical low-level support for the system central processing, memory and I/O sub-systems.

The BIOS setup program of the single board computer let the customers modify the basic configuration setting. The settings are stored in a dedicat ed battery-backed memory, NVRAM, retains the information when the power is turned off. If the battery runs out of the power, then the settings of BIOS will come back to the default setting.

The BIOS section of the manual is subject to change without notice and is provided here for reference purpose only. The settings and configur ations of the BIOS are current at the time of print, and therefore they may not be exactly the same as that displayed on your screen.

To activate CMOS Setup program, press ＜DEL＞ key immediately after you turn on the system. The following message “Press DEL to enter SETUP” should appear in the lower left hand corner of your screen. When you enter the CMOS Setup Utility, the Main Menu will be displayed as Figure 3-1. You can use arrow keys to select your function, press ＜Enter＞ key to accept the selection and enter the sub-menu.

Figure 3-1. CMOS Setup Utility Main Screen

Phoenix – Award BIOS CMOS Setup Utility

>Standard CMOS Features >Frequency/Voltage Control >Advanced BIOS Features Load Fail-Safe Defaults >Advanced Chipset Features >Integrated Peripherals >Power Management Setup Set User Password >PnP / PCI Configurations Save & Exit Setup >PC Health Status Exit Without Saving

Esc : Quit ↑ ↓ → ← : Select Item F10 : Save & Exit Setup

LV-670 Series User’s Manual

Load Optimized Defaults Set Supervisor Password

Page 28

Notes (This page left blank intentionally)

LV-670 Series User’s Manual

Page 29

Chapter 4 Audio Channel Configuration

In order to enable 5.1 channel, please follow the setup steps below:

1. lunch the Control Panel

2. lunch the Sound Effect Manager

3.select Speaker Configuration and choose 6 channel mode for 5.1 speaker

output

LV-670 Series User’s Manual

Page 30

Notes (This page left blank intentionally)

LV-670 Series User’s Manual

Page 31

Chapter 5. Display Settings

Before you using your display device:

1. Check your software Before you can use the display device properly, please install the VGA drivers.

2. Check your hardware Please setup the display device properly before you boot up the system.

For configure your Display device, please follow the instructions below:

1. lunch the display properties.

2. Select settings option and click Advanced Button

3. Select Intel(R) Extreme Graphics and click Graphics properties

LV-670 Series User’s Manual

Page 32

4. There will be a different device list depends on your connecting devices

For Monitor: You can configure the Colors, Screen area (resolution) and Refresh Rate.

For Notebook: If you connect a LCD panel though LVDS interface, you can configure the Colors and Screen Area (resolution) here.

LV-670 Series User’s Manual

Page 33

For Television: If you connect a TV set through S-Video or RCA connector, here can let you configure the Colors, Screen Area (resolution) and Video Standard.

If you connect the Monitor and LCD panel at the same time, here can let you configure if you want to have a clone dual display function. (Notice: TV-out does not have the ability with dual display.)

LV-670 Series User’s Manual

Page 34

Notes (This page left blank intentionally)

LV-670 Series User’s Manual

Page 35

Appendix. A I/O Port Pin Assignment

A.1 IDE Port

Connector: IDE1 Type: 40-pin (20 x 2) box header

Pin Description Pin Description 1 Reset 2 Ground

3 D7 4 D8 5 D6 6 D9 7 D5 8 D10 9 D4 10 D11 11 D3 12 D12 13 D2 14 D13 15 D1 16 D14 17 D0 18 D15 19 Ground 20 N/C 21 REQ 22 Ground 23 IOW-/STOP 24 Ground 25 IOR-/HDMARDY 26 Ground 27 IORDY/DDMARDY 28 IDESEL 29 DACK- 30 Ground 31 IRQ 32 N/C 33 A1 34 CBLID 35 A0 36 A2 37 CS0 (MASTER CS) 38 CS1 (SLAVE CS) 39 LED ACT- 40 Ground

2 1

40 39

LV-670 Series User’s Manual

Page 36

Connector: IDE2 Type: 44-pin (22 x 2) box header

Pin Description Pin Description 1 Reset 2 Ground

3 D7 4 D8 5 D6 6 D9 7 D5 8 D10 9 D4 10 D11 11 D3 12 D12 13 D2 14 D13 15 D1 16 D14 17 D0 18 D15 19 Ground 20 N/C 21 REQ 22 Ground 23 IOW-/STOP 24 Ground 25 IOR-/HDMARDY 26 Ground 27 IORDY/DDMARDY 28 Ground 29 DACK- 30 Ground 31 IRQ 32 N/C 33 A1 34 SD 35 A0 36 A2 37 CS1 38 CS3 39 ASP1 40 Ground 41 Vcc 42 Vcc 43 Ground 44 Ground

2 1

44 43

LV-670 Series User’s Manual

Page 37

A.2 Floppy Port

Connector: FDC1 Type: 34-pin (17 x 2) header

Pin Description Pin Description 1 Ground 2 DRIVE DENSITY SELECT 0

3 Ground 4 DRIVE DENSITY SELECT 1 5 Ground 6 N/C 7 Ground 8 INDEX9 Ground 10 MOTOR ENABLE A11 Ground 12 DRIVER SELECT B13 Ground 14 DRIVER SELECT A15 Ground 16 MOTOR ENABLE B17 Ground 18 DIRECTION19 Ground 20 STEP21 Ground 22 WRITE DATA23 Ground 24 WRITE GATE25 Ground 26 TRACK 027 Ground 28 WRITE PROTECT29 Ground 30 READ DATA31 Ground 32 HEAD SELECT33 Ground 34 DISK CHANGE-

1 2

A.3 Serial Port

Connector: JCOM1 Type: 10-pin (5 x 2) header

Pin Description Pin Description 1 DCD 2 RXD

3 TXD 4 DTR 5 Ground 6 DSR 7 RTS 8 CTS 9 RI 10 N/C

LV-670 Series User’s Manual

1 2

Page 38

A.4 USB Port

Connector: JUSB1 Type: 10-pin (5 x 2) header for dual USB Ports

Pin Description Pin Description 1 Vcc 2 Vcc

3 Data0- 4 Data15 Data0+ 6 Data1+ 7 Ground 8 Ground 9 N/C 10 N/C

A.5 IrDA Port

Connector: JIR1 Type: 10-pin (5 x 2) header for SIR/CIR Ports

Pin Description Pin Description 1 Vcc 6 N/C

2 N/C 7 CIRRX 3 IRRX 8 5V Standby 4 Ground 9 N/C 5 IRTX 10 N/C

6 10

LV-670 Series User’s Manual

Page 39

A.6 VGA Port

Connector: VGA Type: 15-pin D-sub female connector on bracket

Pin Description Pin Description Pin Description 1 RED 6 Ground 11 N/C

2 GREEN 7 Ground 12 5VCDA 3 BLUE 8 Ground 13 HSYNC 4 N/C 9 LVGA5V 14 VSYNC 5 Ground 10 Ground 15 5VCLK

A.7 LAN Port

Connector: LAN Type: RJ45 connector with LED on bracket

Pin 1 2 3 4 5 6 7 8 Description TX+ TX- RX+ N/C N/C RX- N/C N/C

1 2 3 4 5

11 12 13 14 15

LV-670 Series User’s Manual

Page 40

Notes (This page left blank intentionally)

LV-670 Series User’s Manual

Page 41

Appendix B. Flash the BIOS

B.1 BIOS Auto Flash Tool

The board is based on Award BIOS and can be updated easily by the BIOS auto flash tool. You can download the tool online at the address below:

http://www.award.com http://www.commell.com.tw/Support/Support_SBC.htm

File name of the tool is “awdflash.exe”, it’s the utility that can write the data into the BIOS flash ship and update the BIOS.

B.2 Flash Method

1. Get the “.bin” file including the image of new BIOS you want to update.

2. Power on the system and flash the BIOS.

3. Re-star the system.

Any question about the BIOS re-flash please contact your distributors or visit our website at below:

http://www.commell.com.tw/Support/Support_SBC.htm

LV-670 Series User’s Manual

Page 42

Notes (This page left blank intentionally)

LV-670 Series User’s Manual

Page 43

Appendix C. System Resources

C.1 I/O Port Address Map

Address Range Device

0000-000F PC Compatible Eisa/Isa HAL 0020-0021 PC Compatible Eisa/Isa HAL 0040-0043 PC Compatible Eisa/Isa HAL 0048-0048 PC Compatible Eisa/Isa HAL 0060-0060 i8042prt 0061-0064 PC Compatible Eisa/Isa HAL 0064-0064 i8042prt 0070-0071 PC Compatible Eisa/Isa HAL 0080-008F PC Compatible Eisa/Isa HAL 0092-0092 PC Compatible Eisa/Isa HAL 00A0-00A1 PC Compatible Eisa/Isa HAL 00C0-00CF PC Compatible Eisa/Isa HAL 00F0-00FF PC Compatible Eisa/Isa HAL 01CE-01CF VgaSavve 01F0-01F7 atapi 02F8-02FE Serial 0378-037A Parport 03B0-03BB VgaSavve 03C0-03DF VgaSavve 03F0-03F5 Floppy 03F6-03F6 atapi 03F7-03F7 Floppy 03F8-03FE Serial E000-E0FF alcxnt E400-E43F alcxnt

LV-670 Series User’s Manual

Page 44

C.2 Memory Address Map

Range Device

0xCBA00-0xCBFFF System board 0xF0000-0xF7FFF System board 0xF8000-0xFBFFF System board 0xFC000-0xFFFFF System board 0xF7F0000-0xF7FFFFF System board 0x0000-0x9FFFF System board 0x100000-0xF7EFFFF System board 0xFEC00000-0xFEC00FFF System board 0xFEE00000-0xFEE00FFF System board 0xFFB00000-0xFFBFFFFF System board 0xFFF00000-0xFFFFFFFF System board 0xE0000-0xEFFFF System board 0xA0000-0xBFFFF PCI bus 0xA0000-0xBFFFF Intel(R) 82845G Graphics Controller 0xC0000-0xDFFFF PCI bus 0xF800000-0xFEBFFFFF PCI bus 0xE0000000-0xE7FFFFFF Intel(R) 82845G Graphics Controller 0xEC100000-0xEC17FFFF Intel(R) 82845G Graphics Controller 0xEC180000-0xEC1803FF Intel (R) USB Enhanced Host Controller (ICH4) 0xEC000000-0xEC000FFF Intel(R) PRO/100 VE Network Connection 0xEC001000-0xEC001FFF OHCI Compliant IEEE 1394 Host Controller 0xFEBFFC00-0xFEBFFFFF Intel(R) 82801DB Ultra ATA Storage Controller - 24CB 0xEC181000-0xEC1811FF Avance AC'97 Audio 0xEC182000-0xEC1820FF Avance AC'97 Audio

LV-670 Series User’s Manual

Page 45

C.3 System IRQ and DMA Resource

C3.1 IRQ

IRQ Number Device

0 System timer 1 Standard 101/102-Key or Microsoft Natural Keyboard 2 Programmable Interrupt Controller 3 Communications Port (COM2) 4 Communications Port (COM1) 5 ACPI IRQ Holder for PCI IRQ Steering 5 Advance AC97 Audio 5 Intel(R) 82801DB/DBM SMBus Controller - 24C3 5 PCI OHCI Compliant IEEE 1394 Host Controller 6 Standard Floppy Disk Controller 7 Parallel Port (LPT1) 8 System CMOS / Real Time Clock 9 Microsoft ACPI-Compliant System 9 Intel(R) USB Enhanced Host Controller (ICH4) 9 SCI IRQ Used by ACPI Bus 10 ACPI IRQ Holder for PCI IRQ Steering 10 ACPI IRQ Holder for PCI IRQ Steering 10 Intel(R) 82801DB/DBM USB Universal Host Controller – 24C4 10 Intel(R) 82801DB/DBM USB Universal Host Controller – 24C2 10 Intel(R) 82845G/GL Graphics Controller 11 ACPI IRQ Holder for PCI IRQ Steering 11 Intel(R) PRO/100 VE Network Connection 11 Intel(R) 82801DB/DBM USB Universal Host Controller – 24C7 12 PS/2 Compatible Mouse Port 13 Numeric Data Processor 14 Intel(R) 82801DB Ultra ATA Storage Controller – 24CB 14 Primary IDE Controller (Dual FIFO) 15 Intel(R) 82801DB Ultra ATA Storage Controller – 24CB 15 Secondary IDE Controller (Dual FIFO)

LV-670 Series User’s Manual

Page 46

C3.2 DMA

Channel Device

0 (free) 1 (free) 2 Standard Floppy Disk Controller 3 (free) 4 Direct Memory Access Controller 5 (free) 6 (free) 7 (free)

LV-670 Series User’s Manual

Page 47

Contact Information

Any advice or comment about our products and service, or anything we can help you please don’t hesitate to contact with us. We will do our best to support you for your products, projects and business.

COMMELL IPC Division Taiwan Commate Computer, Inc.

COMMELL

Your Embedded Applied Computer Partner

Address

TEL +886-2-26963909 FAX +886-2-26963911 Website http://www.commell.com.tw E-Mail info@commell.com.tw

8F, No. 94, Sec. 1, Shin Tai Wu Rd., Shi Chih Taipei Hsien, Taiwan

(General Information)

tech@commell.com.tw

(Technical Support)

www.commell.com.tw

LV-670 Series User’s Manual