Page 1
Industrial Embedded Motherboard
LV-660 Quick Reference
Embedded Eden Platform
With Low Power Eden/C3 CPU
VGA, LAN, Audio, TV-out
Compact Mini-ITX Form Factor
Specifications
Form Factor Mini-Flex ATX / Mini-ITX Motherboard, 170 x 170 mm (W x L)
CPU Onboard embedded VIA Eden 533 MHz CPU at 133 MHz FSB
Optional VIA Eden 667/400 and EBGA C3 800 MHz CPU
Memory Two 168-pin DIMM slots support up to 1 GB PC133 SDRAM
Chipset VIA 8601A and 8231with 266 Mbytes/Sec. of V-link
Real Time Clock VIA 8231 integrated RTC with onboard lithium battery
Power Management ACPI 1.0 compliant, supports power saving mode with ATX PSU
Expansive Slot 1 x PCI expansive slot
PCI Enhanced IDE Dual UltraATA/100 IDE channels up to 4 ATAPI devices
VGA Interface VIA 8601A chipset built-in Trident Blade 3D SVGA controller
3D/2D engine with 8 MB video memory
Integrated TV-out interface with AV/S-video output
LAN Interface VIA 8231 chipset built-in Fast Ethernet MAC with VIA 6103 PHY
10Base-T/100Base-TX auto-switching, IEEE802.3U compliant
Audio Interface AC97 3D audio interface with line-in, line-out, CD-in, Mic-in
Multiple I/O Port PS/2 keyboard and mouse, parallel and IrDA ports
4 x USB ports (two external and two internal USB ports)
1 x RS-232C serial ports
External I/O Port PS/2 keyboard and mouse
DB25 female LPT port, DB15 female VGA, AV-out, S-video out
RJ45 LAN, dual USB
DB9 male COM1, Audio Line-in/out
Power Requirement Standard ATX power supply
Board Dimension 170 x 170 mm or 6.7 x 6.7 inches
Operation Temperature 0 ~ 60OC (32 ~ 140OF)
LV-660 Quick Reference
Page 2
Industrial Embedded Motherboard
Jumper and Connector Location
(15)
(7)
(14)
(9)
(18)
(19)
(4)
(12)
(11)
(8)
1. VIA Eden or EBGA C3 CPU
2. ATX Power Connector
3. DIMM Sockets (DIMM1-2)
4. PCI Expansion Slot
5. IDE Connector (IDE1)
6. IDE Connector (IDE2)
7. RTC Battery
8. Flash BIOS
9. Clear CMOS (J10)
10. Host Frequency (FSB) (J13)
(16)
(17)
(13)
(1)
(10)
(3)
(6)
(5)
(2)
11. Front Panel Connector
12. FIR Module Connector (J5)
13. Video in Connector (J12)
14. Wake up on Modem (J8)
15. CD ROM Line-in (J7)
16. S/P DIF Output/RCA Video Output Select (J11)
17. FAN Connector (FAN1/FAN2)
18. USB Port 3/4 Connector (J9)
19. CIR Module Connector (J6)
LV-660 Quick Reference
Page 3
Industrial Embedded Motherboard
Jumpers and Connectors
Jumpers
J13
Connectors
FAN1 CPU FAN Connector: This 3-pin header is used for connecting a CPU
FAN2 System Fan Connector: This 3-pin header is for connecting the case
J7 CD ROM Line-in Connector: This 4-pin header is used for connecting
J8 Wake up on Modem connector: This 3-pin header is used for female
J5 FIR Module Connector: This 5-pin header is used for connecting a FIR
J12 Video in Connector: This 16-pin header is used for connecting a video
J6 CIR Module Connector: This 10-pin header is use for connecting a
J9 USB port 3&4 Connector: This 10-pin header is used for connecting a
CN2 COM Port Connector: RS-232 serial port on bracket
CN3 USB 1/2 Connector and RJ45 Connector
CN4 RCA Video or S/P DIF Jack
CN5 S-Video Jack
1-2 Normal Mode J10
2-3 Clear CMOS
1-2 RCA Video Output J11
3-4 S/P DIF Output
1-2 Disabled DOC BIOS J4
2-3 Enabled DOC BIOS
5-6,7-8 66Mhz
3-4,7-8 100Mhz
1-2,3-4 133Mhz
chipset fan.
fan that keeps the system cool.
the CD ROM audio input to the sound card.
wake up of the computer through a network card.
port for use of FIR device.
port for use of video devices.
CIR device.
CIR device.
LV-660 Quick Reference
Page 4
Industrial Embedded Motherboard
R
K
t
I/O Ports
PS/2 Mouse Parallel Port LAN Port COM Port
PS/2 Keyboard VGA Port S-Video out USB Ports Line Out/Line in/Mic in
RCA Video or S/P DIF
Front Panel Connector
Ground
Ground
+5V
Non
Keyboard
Ground
1 2
21 22
LED anode
LED cathode
LED anode
LED cathode
Reset Single
Ground
Power on/off
Ground
(IDELED)
HDDLED
(GLED)
Green LED
(RST)
RESET
BUTTON
(PW ON)
POWER
SWITCH
(SPKR)
SPEAKE
Speaker Ou
EPMI
LED anode
POWER LED
KEYLOC
LED cathode
LV-660 Quick Reference
Loading...