Commell HS-872P, HS-872PE User Manual
HS-872P(E)
Half-size Single Board Computer
User’s Manual
Edition: 1.3
2011/10/31
HS-872P(E) User’s Manual
2
Copyright
Copyright 2007. All rights reserved. This document is copyrighted and all rights are
reserved. The information in this document is subject to change without prior notice to make
improvements to the products.
This document contains proprietary informati on and protected by copyright. No part of this
document may be reproduced, copied, or translated in any f orm or a ny means without prior
written permission of the manufacturer.
All trademarks and/or registered trademarks contains in this docume nt are property of their
respective owners.
Disclaimer
The company shall not be liable for any incidenta l or cons equenti al dam ages resultin g from
the performance or use of this product.
The company does not issue a warrant y of any kind, express or implied, including without
limitation implied warranties of merchantability or fitness for a particular purpose.
The company has the right to revise the manual or inc lude changes in the specific ations of
the product described within it at any time without notice and without obligation to notify any
person of such revision or changes.
Trademark
All trademarks are the property of their respective holders.
Any questions please visit our website at TUhttp://www.commell.com.twUT.
HS-872P(E) User’s Manual
3
Packing List:
Please check the package material before you install the system.
Hardware:
HS-872P(E) Single Board Computer x 1
Cable Kit:
PS/2 Keyboard & Mouse Cable x 1
(OALPS2/MK)
CPU Cooler x 1
(OHS-P-M-3)
4-pin to 3-pin ATX cable x 1
(OAL-ATX-C)
Floppy flat cable x 1
(OALFD/NB)
SATA Cable x 2
(OALSATA-L)
44-pin ATA33 IDE Cable x 1
(OALUDMA33-8)
44pin
40pin
44pin
(HS-872P(E)G only)
DB25 & DB9 cable x 1
(OALP1S1)
(HS-872P(E)DG2 only)
Dual DB9 & DB25 cable x 1
(OAL2S1P)
Printed Matters:
Driver CD x 1 (Including User’s Manual)
USB cable x 1
(OALUSBA-1)
DVI module with DVI cable x 1
(BADP2NDIODVI & OALDVI-P)
Audio Port Cable x 1
(OALPJ-N)
HS-872P(E) User’s Manual
4
Index
Chapter 1 <Introduction>................................................6
1.1 <Product Overview> ..............................................................................6
1.2 <Product Specification>........................................................................7
1.3 < Mechanical Drawing > ........................................................................9
1.4 <Block Diagram>..................................................................................10
Chapter 2 <Hardware Setup>.......................................12
2.1 <Connector Location>.........................................................................12
2.2 <Connector Reference>.......................................................................14
2.2.1 <Internal Connector> ...................................................................14
2.2.2 <External Connector>...................................................................14
2.3 <Jumper Reference>............................................................................15
2.4 < CPU and Memory Setup >................................................................16
2.4.1 <CPU Setup> ............................................................................16
2.4.2 <Memory Setup>........................................................................17
2.5 <CMOS Setup> .....................................................................................18
2.6 <Enhanced IDE Interface>...................................................................19
2.7 <Serial ATA interface>..........................................................................20
2.8 <LAN Interface>....................................................................................20
2.9.1 <Analog VGA Interface> ..........................................................21
2.9.2 <Digital Display> ....................................................................22
2.9.3 <DVI Interface > .....................................................................25
2.9.4<TV-out Interface>...................................................................26
2.10 <Onboard Audio Interface>...............................................................29
2.11 <USB2.0 Interface> ............................................................................30
2.12 <Serial Port Jumper Setting >...........................................................32
2.13 <Power and Fan Installation> ...........................................................33
2.13.1 <Power connectors>...................................................................33
2.13.2 <Fan Connectors> .....................................................................34
HS-872P(E) User’s Manual
5
2.15 <Switch and Indicator>......................................................................36
Chapter 3 <System Configuration>.............................38
3.1 <Video Memory Setup>........................................................................38
3.2 <Audio Setting>....................................................................................40
Chapter 4 <BIOS Setup>...............................................41
(This Page is Left for Blank)..........................................................42
Appendix A <I/O Port Pin Assignment> ...................... 43
A.1 IDE Port.................................................................................................43
A.2 <Serial ATA Port>.................................................................................43
A.3 < Floppy Port >.....................................................................................44
A.4 <Serial Port>.........................................................................................44
A.5 <IrDA Port>...........................................................................................44
A.6 <VGA Port>...........................................................................................45
A.7 <LAN Port>........................................................................................... 45
A.8 < USB Port >.........................................................................................45
A.9 <AT Keyboard Port> ............................................................................46
A.10 <PS/2 Keyboard & Mouse Port>.......................................................46
Appendix B <Flash BIOS>............................................48
B1. <BIOS Auto Flash Tool>......................................................................48
B2. <Flash Method> ...................................................................................48
Appendix C <System Resources>...............................49
Appendix D <Programming GPIO’s>...........................53
Appendix E <Watch Dog timer Setting >.....................54
Contact Information......................................................56
HS-872P(E) User’s Manual Introduction
Product Overview
6
Chapter 1 <Introduction>
1.1 <Product Overview>
The HS-872P(E) is an all-in-one single boar d computer with PISA bus. with supporting Intel
Core 2 Duo / Core Duo / Core solo / Celeron M processor for 533/667M Hz front side bus,
Intel 945GM(E) and ICH7-M chipset, integrated GMA950 graphics, DDR2 SDRAM memory,
Realtek AC97 Audio, Serial ATA and two Intel 82573L Gigabit LAN .
Intel Yonah dual core Processor
The board supports Intel Core 2 Duo / Core Duo / Core Solo / Celeron M processor with
533/667MHz front side bus, 2MB L2 cache, to provide more powerful performance than
before.
New features for Intel 945GM(E) chipset
The board integrates Intel 945GM(E) and ICH7-M chipset, to provide new generation of the
mobile solution, supports Intel GMA950 graphics, DDR2 533/667 memory, built-in high
speed mass storage interface of serial ATA, AC97 Audio with 5.1 channels surrounding
sound.
All in One multimedia solution
Based on Intel 945GM(E) and ICH7-M chipset, the board provides high performance
onboard graphics, 18-bit Dual channel LVDS interface, DVI and HDTV and 5.1 channels
AC97 Audio, to meet the every requirement of the multimedia application.
Flexible Extension Interface
The board also provides Compact Flash Type II socket and one mini-PCI socket.
HS-872P(E) User’s Manual Introduction
Product Specification 7
1.2 <Product Specification>
General Specification
Form Factor Half-size PISA CPU card
CPU Intel® Core 2 Duo/ Core Duo/ Core Solo/ Celeron M processor
Package type: Micro- FCPGA478
Front side bus: 533/667MHz
Memory 1 x 240-pin DDR2 400/533/667MHz SDRAM up to 2GB
Unbufferred, none-ECC memory supported only
Chipset Intel® 945GM(E) and ICH7-M
BIOS Phoenix-Award v6.00PG 4Mb PnP flash BIOS
Green Function Power saving mode includes doze, standby and suspend modes.
ACPI version 1.0 and APM version 1.2 compliant
Watchdog Timer System reset programmable watchdog timer with 1 ~ 255 sec./min.
of timeout value
Real Time Clock Intel® ICH7-M built-in RTC with lithium battery
Enhanced IDE UltraATA33 IDE interface supports up to 2 ATAPI devices
One 44-pin IDE port onboard
One CompactFlash Type II socket on solder side
Serial ATA Intel® ICH7-M integrates 2 Serial ATA interfaces
(No RAID Function)Up to 150MB/s of transfer rate
Multi-I/O Port
Chipset Intel® ICH7-M with Winbond® W83627THG controller
Serial Port One RS232 and one jumper selectable RS232/422/485
USB Port 4 x Hi-Speed USB 2.0 ports with 480Mbps of transfer rate
Parallel Port One internal bi-direction parallel port with SPP/ECP/EPP mode
Floppy Port One internal Floppy port
IrDA Port One IrDA compliant Infrared interface supports SIR
K/B & Mouse PS/2 keyboard and mouse port
GPIO One 12-pin Digital I/O connector with 8-bit programmable
Smart Fan One CPU fan connectors for fan speed controllable
VGA Display Interface
Chipset Intel® 945GM(E) GMCH (Graphic Memory Controller Hub)
Memory Up to 224MB shared with system memory
Display Type CRT, LCD monitor with analog display, DVI, HDTV
Connector External DB15 female connector on rear I/O panel
Onboard 40-Pin LVDS connector
Onboard 26-Pin DVI connector
Onboard 9-Pin TV-out connector
HS-872P(E) User’s Manual Introduction
Product Specification
8
Ethernet Interface
Chipset Intel 82573L Gigabit Ethernet controller
Type Triple speed 10/100/1000Base-T
auto-switching Fast Ethernet
Full duplex, IEEE802.3U compliant
Connector External two RJ45 connectors with LED on rear I/O panel
Solid State Disk Interface
Flash Type Compact Flash Type II for Compact Flash Card or Micro Drive
ISA Interface
ISA Bridge Winbond W83628G & W83629G
Function I/O & IRQ supported only, no support DMA & bus mastering
Audio Interface
Chipset REALTEK ALC655
Interface 5.1 channel surround audio with Line-in, Line-out and MIC-in
Connector Onboard audio connector with pin header
Onboard CD-IN connector
Expansive Interface
Mini PCI 1 x Mini PCI socket
Power and Environment
Power
Requirement
+5V, +12 DC input & 5V
SB
Requirement
Dimension 185 (L) x 127 (H) mm
Temperature Operating within 0 ~ 60P
o
P
C (32 ~ 140P
o
P
F)
Storage within -20 ~ 85
P
o
P
C (-4 ~ 185P
o
P
F)
Ordering Code
HS-872P(E)DG Support Intel Core 2 Duo/Core Duo/Core solo/Celeron M
Processor with onboard VGA, DVI, LVDS, Audio, SATA, Giga LAN,
USB2.0, Serial port, LPT, CF, GPIO, Mini PCI, FDD,IrDA
HS-872P(E)DG2 Same as above and with secondary Gigabit LAN
The specifications may be different as the actual board.
For further product information please visit the website at
TUhttp://www.commell.com.twUT
HS-872P(E) User’s Manual Introduction
Mechanical Drawing
9
1.3 < Mechanical Drawing >
Unit: inch
HS-872P(E) User’s Manual Introduction
Block Diagram
10
1.4 <Block Diagram>
Intel Y onah Processo
r
Intel GMA950 Graphics
945GM(E)
ICH7-M
BIOS
AC97 AL C655
HDTV＆LVDS＆DVI
W83627THG
2 x SATA
CompactFlash＆IDE
2 x Serial ports
4 x USB2.0 ports
8-bit GPIO
Intel 82573L
2 x GLAN
1 x 240-pin DDR2
533/667MHz up to
2GB
1 x Parallel port
1 x Floppy port
1 x IrDA
PICMG Backplane
ISA Bridge
HS-872P(E) User’s Manual
11
(This Page is Left for Blank)
HS-872P(E) User’s Manual Hardware Setup
Connector Location
12
Chapter 2 <Hardware Setup>
2.1 <Connector Location>
SYSFAN
CN_IR
IDE
CN_LVDS
CDIN
CN AUDIO
CN_DIO
SATA1/2
JFRNT
CN_PS
DC_IN
CN_HDTV
CN_COM2
CPUFAN
CN_USB1/2
CN_DVI
FDD
MINIPCI
CN_INV
CN_ATKB
CN_LPT
DDRII_A
CN_COM1
JCRT
CPUFAN
HS-872P(E) User’s Manual Hardware Setup
Connector Location 13
PS2 RJ45_1 RJ45_2 CRT
CF
HS-872P(E) User’s Manual Hardware Setup
Connector Reference
14
2.2 <Connector Reference>
2.2.1 <Internal Connector>
Connector Function Remark
DDRII_A 240 –pin DDR2 SDRAM DIMM socket Standard
IDE 44-pin primary IDE connector Slim
FDD 26-pin floppy connector Slim
S_ATA1/2 7-pin Serial ATA connector Standard
DC_IN 4-pin AT power supply connector Standard
CN_PS 3-pin ATX function connector Standard
CN_AUDIO 5 x 2-pin audio connector Standard
CDIN 4-pin CD-ROM audio input connector Standard
CN_DIO 6 x 2-pin digital I/O connector Slim
CN_LPT 13 x 2-pin LPT connector Standard
CN_HDTV 5 x 2-pin HDTV interface Standard
CN_LVDS 20 x 2-pin LVDS connector Standard
CN_INV 5-pin LCD inverter connector Standard
CN_USB1/2 5 x 2-pin USB connector Standard
CPUFAN 4-pin CPU cooler fan connector Standard
SYSFAN 3-pin system cooler fan connector Standard
CN_IR 5-pin IrDA connector Standard
CN_ATKB 5-pin AT keyboard connector Standard
CN_DVI 26-pin TMDS connector Standard
JFRNT 14-pin front panel switch/indicator connector Standard
CF Compact Flash TYPE-II socket Standard
MINIPCI Mini-PCI socket Standard
CN_COM1/2 10-pin serial port connector Standard
2.2.2 <External Connector>
Connector Function Remark
CRT DB15 VGA connector Standard
RJ45_1/2 One RJ45 LAN connector Standard
PS2 PS/2 keyboard and mouse connector Standard
HS-872P(E) User’s Manual Hardware Setup
Jumper Reference 15
2.3 <Jumper Reference>
Jumper Function
JRTC CMOS Operating/Clear Setting
JVLCD LCD Panel Voltage Setting
JCRT CRT attach select setting
JCSEL1/2 COM2 RS232/422/485 mode setting
JRTC
JVLCD
JCSEL1
JCSEL2
JCRT
HS-872P(E) User’s Manual Hardware Setup
CPU & Memory Setup
16
2.4 < CPU and Memory Setup >
2.4.1 <CPU Setup>
The board comes with the socket479 for Intel Core 2 Dual/Core Dual /Core solo
processor, it supports new generation of Intel Core 2 Dual/Core Dual /Core solo
processor with 533/667MHz of front side bus and 2MB L2 cache. Please follow the
instruction to install the CPU properly.
1. Use the flat-type
screw drive to unlock
the CPU socket
Unlock wa
y
Check point
2. Follow the pin direction to install
the processor on the socket
3. Lock the socket
HS-872P(E) User’s Manual Hardware Setup
Memory Setup 17
2.4.2 <Memory Setup>
HS-872P(E) has one 240-pin DDR2 DIMM support up to 2GB of memory capacity. The
memory frequency supports 533/667MHz. Only Non-ECC memory is supported.
Dual-Channel technology is supported while applying two same modules on one of each
group.
DDRII_A
112-pin128-pin
Please check the pin number to match the slot side well
before installing memory module.
Loading...