COMMELL ES-270E User Manual

ES-270

ETX CPU module

User’s Manual

Edition 1.1

2007/06/13

ES-270 User’s Manual

Copyright 2006. All rights reserved. This document is copyrighted and all rights are reserved. The information in this document is subject to change without prior notice to make improvements to the products. This document contains proprietary information and protect ed by copyright. No part of this document may be reproduced, copied, or translated in any form or any means without prior written permission of the manufacturer. All trademarks and/or registered trademarks contains in this document are propert y of their respective owners.

Disclaimer

The company shall not be liable for any incidental or consequenti al dam ages res ultin g from the performance or use of this product. The company does not issue a warranty of any kind, e xpress or implied, including without limitation implied warranties of merchantability or fitness for a particular purpose. The company has the right to revise the manual or include changes in th e specifications of the product described within it at any time without notice and without obligation to notify any person of such revision or changes.

Trademark

All trademarks are the property of their respective holders.

Any questions please visit our website at TUhttp://www.commell.com.twUT

ES-270 User’s Manual

Packing List

Please check the package before you starting setup the system

Hardware:

ES-270 ETX CPU Module x 1

Cable Kit:

26-pin slim type floppy cable x 1

Serial ATA ribbon cable x 2

Head Sink and four screws

Other Accessories:

Divers CD (including User’s Manual) x 1 Printed User’s Manual x 1

ES-270 User’s Manual

Index

Chapter 1 <Introduction>.....................................................................................7

1.1 <Product Overview>.................................................................................7

1.2 <Product Specification>...........................................................................8

1.3 <Mechanical Drawing>...........................................................................10

1.4 <Block Diagram>....................................................................................11

Chapter 2 <Hardware Setup>.............................................................................12

2.1 <Connector Location>............................................................................12

2.2 <Connector Reference>.........................................................................13

2.2.1 <Internal Connector>..................................................................13

2.3 <CPU and Memory Setup>.................................................................... 14

2.3.1< CPU>........................................................................................14

2.3.2 <Memory> ..................................................................................15

2.4 <Enhanced IDE Interface>.....................................................................16

2.5 <Serial ATA Interface>...........................................................................16

2.6 <Floppy Port>......................................................................................... 17

2.7 <LAN Interface>.....................................................................................18

2.8 <Onboard Display Interface>.................................................................18

2.9 <USB2.0 Interface>................................................................................19

Chapter 3 <System Configuration>...................................................................21

3.1 <Video Memory Setup> .........................................................................21

Chapter 4 <BIOS Setup> ....................................................................................24

Appendix A <ETX connector Assignment>………………………………… …….26

Appendix B <I/O Port Pin Assignment> ...........................................................29

B.1 <Floppy Port> ........................................................................................29

B.2 <Serial ATA Port>..................................................................................29

Appendix C <Flash BIOS>..................................................................................31

C.1<BIOS Auto Flash Tool>.........................................................................31

ES-270 User’s Manual

C.2<Flash Method>...................................................................................... 31

Appendix D <System Resources>…………………………………………….……32

Contact Information............................................................................................36

ES-270 User’s Manual

(The Page is Left For Blank)

ES-270 User’s Manual Introduction

Chapter 1 <Introduction>

1.1 <Product Overview>

ES-270 is the new generation of the ETX CPU module, with supporting Intel Core 2

Duo/Core Duo/Core solo processors for 533/667MHz front side bus, Intel 945GM(E) and ICH7-M chipset, integrated GMA950 graphics, DDR2 SO-Dimm SDRAM, REALTEK AC97 Audio and serial ATA with provide the economical embedded platform.

Intel Yonah dual core Processor

The board supports Intel Core 2 Duo/ Core Duo/Core Solo processors with 533/66 7MHz front side bus, 2MB L2 cache, to provide more powerful performance than before.

New features for Intel 945GM(E) chipset

The board integrates Intel 945GM(E) and ICH7-M chipset, to provide new generation of the mobile solution, supports Intel GMA950 graphics, DDR2 400/533/667 memor y, built-in high speed mass storage interface of serial ATA, AC97 Audio with 5.1 channels surrounding sound.

All in One multimedia solution

Based on Intel 945GM(E) and ICH7-M chipset, the board provides high performance onboard graphics, 24/18-bit Single/dual channel LVDS interface, 5.1 channels AC97 Audio, to meet the very requirement of the multimedia application.

Product Overview

ES-270 User’s Manual Introduction

1.2 <Product Specification>

General Specification

Form Factor ETX CPU module CPU Intel® Core 2 Duo/ Core Duo/Core Solo processors

Package type: FC-PGA478 Front side bus: 533/667MHz

Memory 1 x 200-pin DDR2 SoDIMM SDRAM up to 2GB

Unbufferred, none-ECC memory supported only Chipset Intel® 945GM(E) (Northbridge) and ICH7-M (Southbridge) BIOS Phoenix-Award v6.00PG 4Mb PnP flash BIOS Green Function Power saving mode includes doze, standby and suspend modes.

ACPI version 1.0 and APM version 1.2 compliant Watchdog Timer System reset programmable watchdog timer with 1 ~ 255

sec./min. of timeout value Real Time Clock Intel® ICH7-M built-in RTC with lithium battery Enhanced IDE Support one channels & up to two IDE device

Support Ultra DMA 33/66/100MHz IDE device Serial ATA Intel® ICH7-M integrates 2 Serial ATA interfaces(No RAID

Function)

Up to 150MB/s of transfer rate

Multi-I/O Port

Chipset Intel® ICH7-M with Winbond® W83627THG controller Serial Port Support two Serial Port USB Port Support four USB 2.0 Ports Floppy Port One slim type Floppy port IrDA Port One IrDA compliant Infrared interface supports SIR K/B & Mouse Support PS/2 keyboard and mouse interface

VGA Display Interface

Chipset Intel® 945GM(E) GMCH integrate GMA 950 Frame Buffer Up to 224MB shared with system memory Display Type Onboard 18-bit ＆ optional 24-bit dual channel LVDS, CRT

Ethernet Interface

Chip Intel 82562 PHY Type 10Base-T / 100Base-TX

auto-switching Fast Ethernet Full duplex, IEEE802.3U compliant

Audio Interface

Chip Intel® ICH7M with Realtek® ALC655 AC97 Audio compliance Interface 5.1 channels sound output

Support Line-in, Line-out and MIC-in

Product Specification

ES-270 User’s Manual Introduction

Expansive Interface

PCI 4 PCI bus master interface

Power and Environment

Power Requirement Dimension 114mm x 95mm Temperature Operating within 0 ~ 60℃ (32 ~ 140℉)

Ordering Code

ES-270 Support Intel Core 2 Duo/Core Duo/Solo processor with onboard

1. The specifications may be different as the actual production. For further product information please visit the website at http://www.commell.com.tw

5V, 5Vstandby

Storage within -20 ~ 85℃ (-4 ~ 185℉)

LVDS, Audio, SATA, USB2.0, LPT, PCI, FDD

Product Specification

ES-270 User’s Manual Introduction

1.3 <Mechanical Drawing>

Mechanical Drawing

ES-270 User’s Manual Introduction

1.4 <Block Diagram>

Intel Yonah Processo

1 x 200-pin SoDIMM

Intel GMA950 Graphics

DDRII 400/533/667

to 2GB

LVDS ＆ CRT

CompactFlash＆IDE

4 x USB2.0 ports

1 x LPT port

1 x Floppy port

2 x Serial ports

W83627THG

945GM(E)

4 x PCI

ICH7-M

2 x SAT

AC97 ALC655

IrDA

BIOS

Block Diagram

+ 25 hidden pages