Commell CMS-370Q Assemble Manual & User's Manual

1

CMS-370Q

Fanless Barebone Capture system

Assemble Guide & User’s Manual

V1.0

2008/02/27

2

Copyright

Copyright 2005, all rights reserved. This document is copyrighted and all rights are reserved. The information
in this document is subject to change without prior notice to make improvements to the products.
This document contains proprietary information and protected by copyright. No part of this document may be
reproduced, copied, or translated in any form or any means without prior written permission of the
manufacturer.
All trademarks and/or registered trademarks contains in this document are property of their respective
owners.

Disclaimer

The company shall not be liable for any incidental or consequential damages resulting from the performance
or use of this product.
The company does not issue a warranty of any kind, express or implied, including without limitation implied
warranties of merchantability or fitness for a particular purpose.
The company has the right to revise the manual or include changes in the specifications of the product
described within it at any time without notice and without obligation to notify any person of such revision or
changes.

Trademark

All trademarks are the property of their respective holders.

Any questions please visit our website at http://www.commell.com.tw

3

Index

1. Packing List ……………………………………………………… 4

2. Outlook …………………………………………………………….. 5

3. Hardware installation ……………………………………….. 6

4. Driver Installation …………………………………………….. 8

5. Sample program ……………………………………………….. 12

4

1. Packing List:

Please check the package content before you starting using the board.

Hardware:

◆ Fanless Case

X 1

◆ LE-370PM14 Motherboard

X 1

◆ MP-9116 Mini-PCI capture card

X 1

◆ SPD-080-12 , 12V/80W adapter

X 1

◆ OALLES-BKU1NB , DB9 1 COM cable

X 1

◆ OALBNCE8 , DB9 to BNC*8 cable (Channel 1 ~ 8 )

X 1

◆ OALBNCE8-1 , DB9 to BNC*8 cable ( Channel 9 ~ 16 )

X 1

◆ OALPJ-U10 Audio cable

X 1

◆ OALPS2/MK Keyboard/Mouse cable

X 1

◆ OALUSB-10 USB cable

X 1

◆ Screw Package

X 1

◆ Driver and Utility CD

X 1

5

2. Outlook:

Front IO

Rear IO

Power Button Reset Button

6

3. Hardware installation Guide:

3-1 Install Heatsink & Copper Pillar 3-2 Insert Memory & Mini-PCI card into MB

3-3 Lock Audio , USB and DB9 cable on the
Rear plate

3-4 Install HDD on the bottom plate

3-5 Connect Audio , USB , DB9 cable with MB 3-6 Screw MB into Copper Pillar

3-7 Lock the Rear plate 3-8 Connect HDD cable and Power / Reset

buttom

3-9 lock the bottom plate 3-10 Assemle Front plate and loak

3-11 Completed

7

3-12

The JFRNT provides front control panel of the board, such as power button, reset and beeper, etc. Please check well
before you connecting the cables on the chassis.

Connector: JFRNT
Type: onboard 14-pin (2 x 7) 2.54-pitch header

Function Signal PIN Signal Function

VCC 1 2 VCC

IDE LED

Active 3 4 N/C

Reset 5 6 GND

Power

LED

Reset

GND 7 8 VCC

N/C 9 10 N/C

PWRBT 11 12 N/C

Power

Button

5VSB 13 14 SPKIN

Speaker

1

14

8

4. Driver Installation:

4-1

When you completed the Hardware installation, Please choose Device Manager

4-2 Then you can see other devices

9

4-3 Please choose Multimedia Controller then press Reinstall Driver

4-4 Please choose NO，not this time press next

10

4-5 Please choose Install from a list on specific location

4-6 Please select file location G:\Driver\MP-9100 then press OK

11

4-7 After driver install, please enter Device Manager then select Mv9100 WDM (06/17/2006) press pro perties.

12

5. Sample Program:

5-1 When you completed hardware & software installation, please find the “ DrvTest “ in the CD

Please double –click “ DrvTest , It’ll pops up as following.
Then Please Push “ Display Start “ on the left-upper Menu.

You ‘ll get the video show .

Note : If you only need 4 channel input for D1 resolution , please connect
Channel 13 , Channel 14 , Channel 15 , Channel 16 to get video output .

13

If you need 16 channel inputs , please split into 4 each Channel before Push “ Display Start “

Any advice or comment about our products and service, or anything we can help you
please don’t hesitate to contact with us. We will do our best to support you for your products,
projects a business.

Taiwan Commate Computer Inc.

Address

8F, No. 94, Sec. 1, Shin Tai Wu Rd., Shi Chih

Taipei Hsien, Taiwan
TEL [phone]
FAX [phone]
Website

TUhttp://www.commell.com.twUT

E-Mail

[e-mail] (General Information)

[e-mail] (Technical Support)

Commell is a trademark of Taiwan Commate Computer Inc.