CES-471
COM Express Module
User’s Manual
Edition 1.01
2009/05/04
CES-471 User’s Manual
Copyright
Copyright 2008, all rights reserved. This document is copyrighted and all rights are
reserved. The information in this document is subject to change without prior notice to
make improvements to the products.
This document contains proprietary information and pr otected by copyright. No part of
this document may be reproduced, copied, or translated in any form or any means
without prior written permission of the manufacturer.
All trademarks and/or registered trademarks contains in this document are prop erty of
their respective owners.
Disclaimer
The company shall not be liable for any incidental or consequential damages resulting
from the performance or use of this product.
The company does not issue a warranty of any kind, express or implied, including
without limitation implied warranties of merchantability or fitness for a particular purpose.
The company has the right to revise the manual or include changes in the specifications
of the product described within it at any time without notice and without obligation to
notify any person of such revision or changes.
Trademark
All trademarks are the property of their respective holders.
Any questions please visit our website at TUhttp://www.commell.com.twUT
2
CES-471 User’s Manual
Packing List:
Please check the package content before you starting using the board.
Hardware:
CES-471 COM Express module x 1
Attached:
CD Content:
Drivers & User’s Manual
CES-471 heat sink x 1
3
CES-471 User’s Manual
Index
Chapter 1 <Introduction>...............................................................6
1.1 <Product Overview> .................................................................6
1.2 <Product Specification>............................................................7
1.3 <Mechanical Drawing>.............................................................9
1.4 <Block Diagram>....................................................................10
Chapter 2 <Hardware Setup>....................................................12
2.1 <Connector Location>.............................................................12
2.2 <Connector Reference>...........................................................13
2.2.1 <Internal Connectors> .........................................................13
2.3 <CPU and Memory Setup>.....................................................13
2.3.1 <CPU Setup>.....................................................................13
2.3.2 <Memory Setup>................................................................14
2.4 <CMOS Setup>.......................................................................15
Chapter 3 <System Configuration>......................................16
3.1 <Video Memory Setup>..........................................................16
Chapter 4 <BIOS Setup>...............................................................17
Appendix A <Flash BIOS>...........................................................19
A.1 <Flash Tool>...........................................................................19
A.2 <Flash BIOS Procedure>........................................................19
Appendix B <COM Express Pin assignment>..............20
Contact Information.........................................................................24
4
CES-471 User’s Manual
(This Page is Left for Blank)
5
CES-471 User’s Manual
Chapter 1 <Introduction>
1.1 <Product Overview>
CES-471 is the new generation of the COM express module, with supporting last Intel
Core 2 Duo socket-P processors for 533/667/800 MHz front side bus, Intel GME965
and ICH8-M chipset, integrated GMA X3100 graphics, DDR2 SO-DIMM memory,
support High Definition Audio, Serial ATA, PCI Express x16, x1 interface and one
Gigabit LAN
Intel Merom dual core Processor
The board supports last Intel Core 2 Duo socket-P processors with 533/667/800MHz
front side, 2MB L2 cache, to provide more powerful performance than before.
New features for Intel GME965 chipset
The module integrates Intel GME965 and ICH8-M chipset, to provide new generation of
the mobile solution, supports Intel GMA X3100 graphics, DDR2 SO-DIMM 533/667
memory, built-in high speed mass storage interface of serial ATA, High Definition Audio
interface.
All in One multimedia solution
Based on Intel GME965 and ICH8-M chipset, the module provides high performance
onboard graphics, 24-bit dual channel LVDS interface, to meet the very requirement of
the multimedia application.
Flexible Extension Interface
The module support one PCI-Express x16 slot, five PCI-Express x1, it also support four
PCI slots, one Mini PCI.
6
CES-471 User’s Manual
1.2 <Product Specification>
General Specification
Form Factor COM Express Module
CPU Intel® Core 2 Duo Mobile processor
Package type: FCPGA478
L2 Cache: All specification depend on the CPU. (1M/2M/3M/4M)
Front side bus: 533/667/800 MHz (Socket-P)
Memory 1 x 200-pin DDR2 SO-DIMM 533/667MHz SDRAM up to 2GB
Unbufferred, none-ECC memory supported only
Chipset Intel® GME965 (Northbridge) and ICH8-M (Southbridge)
BIOS Phoenix-Award v6.00PG 8Mb SPI flash BIOS
Green Function Power saving mode includes doze, standby and suspend modes.
ACPI version 1.0 and APM version 1.2 compliant
Watchdog Timer System reset programmable watchdog timer.
Real Time Clock Intel® ICH8-M built-in RTC
Enhanced IDE Support UltraDMA100 IDE interface supports up to 2 ATAPI devices
Serial ATA Intel® ICH8-M integrates support 3 x Serial ATA interfaces
Up to 300MB/s of transfer rate
VGA Display Interface
Chipset Intel GME965 GMCH (Graphic Memory Controller Hub)
Frame Buffer Up to 384MB shared with system memory
Display Type Support CRT, LCD monitor with analog display
Support 24-bit dual channel LVDS interface, HDTV
Ethernet Interface
Controller Intel 82573L Gigabit Ethernet controller
Type Triple speed 10/100/1000Base-T
Auto-switching Fast Ethernet
Full duplex, IEEE802.3U compliant
Expansive Interface
PCI-Express Support one x16 PCI-Express slot (compatible with x1 slot)
and five x1 PCI-Express slots
PCI-Express x16 Up to 8GB/s of transfer bandwidth
PCI-Express x1 Up to 5Gb/s of transfer bandwidth
Power supply: +3.3V, +12V
PCI Support four PCI slots, Power supply: +12V, +5VSB
Audio Support ICH8-M HD Audio
Power and Environment
Dimension 125(L) x 95 (W) mm
Temperature Operating within 0 ~ 60P
Storage within -20 ~ 85P
o
P
C (32 ~ 140P
o
P
C (-4 ~ 185P
o
P
F)
o
P
F)
7
CES-471 User’s Manual
Ordering Code
CES-471 COM Express module for Intel Core 2 Duo Processor
The specifications may be different as the actual production.
For further product information please visit the website at TUhttp://www.commell.com.tw
UT
8
CES-471 User’s Manual
1.3 <Mechanical Drawing>
‘
‘
‘
‘
‘
‘
‘
9
CES-471 User’s Manual
1.4 <Block Diagram>
Intel Core 2 Duo Mobile Processors
Intel GMA X3100 Graphics
PCI-Express x16
LVDS
HDTV
GME965
1 x 200-pin DDR2
SoDIMM 533/667 MHz
up to 2GB
UltraDMA100 IDE
8 x USB2.0 ports
HD Audio Interface
3 x Serial ATA ports
Five PCI Express x1
ICH8-M
Four PCI
SPI
BIOS
10
CES-471 User’s Manual
(This Page is Left for Blank)
11
CES-471User’s Manual
Chapter 2 <Hardware Setup>
2.1 <Connector Location>
DDRII SoDIMM
CPU
12
CES-471 User’s Manual
y
2.2 <Connector Reference>
2.2.1 <Internal Connectors>
Connector Function Remark
CPU Socket478 for CPU Standard
DDRII 200 -pin DDR2 SoDIMM slot Standard
2.3 <CPU and Memory Setup>
2.3.1 <CPU Setup>
The module comes with the socket478 for Intel Core 2 Duo Mobile processor, it supports
new generation of Intel Core 2 Duo Mobile processors with 533/667/800 MHz of front
side bus and 2MB L2 cache. Please follow the instruction to install the CPU properly.
1. Use the flat-type
screw drive to unlock
the CPU socket
3. Lock the socket
Unlock wa
Check point
2. Follow the pin direction to install
the processor on the socket
13
CES-471User’s Manual
2.3.2 <Memory Setup>
The module provides one 200-Pin DDRII SoDIMM slot 533/667 memory modules up to
2GB of capacity. Non-ECC, unbuffered memory is supported only.
(1. Insert the DDRII So-DIMM module into the socket at 45 degree)
(2. Press down the module with a click sound)
14
CES-471 User’s Manual
2.4 <CMOS Setup>
The board’s data of CMOS can be setting in BIOS. If the board refuses to boot due to
inappropriate CMOS settings, here is how to proceed to clear (reset) the CMOS to its
default values.
Jumper: JRTC
Type: Onboard 3-pin jumper
JRTC Mode
1-2 Clear CMOS
2-3 Normal Operation
Default setting
1
3
2.5 <Ethernet Interface>
The Intel 82573L supports triple speed of 10/100/1000Base-T, with IEEE802.3
compliance and Wake-On-LAN supported.
Memory Setup
15
CES-471 User’s Manual
Chapter 3 <System Configuration>
3.1 <Video Memory Setup>
Based on Intel® GME965 chipset with GMA (Graphic Media Accelerator) X3100, the
board supports Intel® DVMT (Dynamic Video Memory Technology) 4.0, which would
allow the video memory be triggered up to 384MB.
To support DVMT, you need to install the Intel® GMA X3100 Driver with supported OS.
BIOS Setup:
On-Chip Video Memory Size: This option combines three items below for setup.
On-Chip Frame Buffer Size:
This item can let you select video memory which been allocated for leg acy VGA and
SVGA graphics support and compatibility. The available option is 1MB and 8MB.
DVMT Mode: This item can let you select graphics memory which Fixed or DVMT.
DVMT/FIXED Memory Size:
This item can let you select a maximum size of dynamic amount usage of video memory,
the system would configure the video memory depends on your application, this item is
strongly recommend to be selected as MAX.
16
CES-471 User’s Manual
Chapter 4 <BIOS Setup>
The motherboard uses the Award BIOS for the system configuration. The Award BIOS
in the single board computer is a customized version of the industrial standard BIOS for
IBM PC AT-compatible computers. It supports Intel x86 and compatible CPU
architecture based processors and computers. The BIOS provides critical low-level
support for the system central processing, memory and I/O sub-systems.
The BIOS setup program of the single board computer let the customers modify the
basic configuration setting. The settings are stored in a dedicated battery-backed
memory, NVRAM, retains the information when the power is turned off. If the battery
runs out of the power, then the settings of BIOS will come back to the default setting.
The BIOS section of the manual is subject to change without notice and is provided here
for reference purpose only. The settings and configurations of the BIOS are current at
the time of print, and therefore they may not be exactl y the same as that displayed on
your screen.
To activate CMOS Setup program, press ＜DEL＞ key immediatel y after you turn on
the system. The following message “Press DEL to enter SETUP” should appear in the
lower left hand corner of your screen. When you enter the CMOS Setup Utility, the Main
Menu will be displayed as Figure 4-1. You can use arrow keys to select your function,
press ＜Enter＞ key to accept the selection and enter the sub-menu.
Figure 4-1 CMOS Setup Utility Main Screen
17
CES-471 User’s Manual
(This Page is Left for Blank)
18
CES-471 User’s Manual
Appendix A <Flash BIOS>
A.1 <Flash Tool>
The board is based on Award BIOS and can be updated easily by the BIOS auto
flash tool. You can download the tool online at the address below:
http://www.phoenix.com/en/home/
http://www.commell.com.tw/Support/Support_SBC.htm
File name of the tool is “awdflash.exe”, it’s the utility that can write the data into the
BIOS flash ship and update the BIOS.
A.2 <Flash BIOS Procedure>
1. Please make a bootable floppy disk.
2. Get the last .bin files you want to update and copy it into the disk.
3. Copy awardflash.exe to the disk.
4. Power on the system and flash the BIOS. (Example: C:/ awardflash XXX.bin)
5. Restart the system.
Any question about the BIOS re-flash please contact your distributors or visit the
web-site at below:
http://www.commell.com.tw/support/support.htm
UT
19
CES-471 User’s Manual
Appendix B <COM Express Pin assignment>
COM A
A1 GND A26 SATA2RX- A51 GND A76 ATX2- A101 +12V
A2 MDI13- A27 BATLOW# A52 N/C A77 LVDD EN A102 +12V
A3 MDI13+ A28 ATA_ACT# A53 N/C A78 ATX3+ A103 +12V
A4 RLINK100# A29 AC_SYNC A54 N/C A79 ATX3- A104 +12V
A5 RLINK1000# A30 AC_RST# A55 PCIE_TX5+ A80 GND A105 +12V
A6 MDI12- A31 GND A56 PCIE_TX5- A81 ACLK+ A106 +12V
A7 MDI12+ A32 AC_BITCLK A57 GND A82 ACLK- A107 +12V
A8 RLINK# A33 AC_SDOUT A58 PCIE_TX4+ A83 LVDDCLK A108 +12V
A9 MDI11- A34 N/C A59 PCIE_TX4- A84 LVDDDAT A109 +12V
A10 MDI11+ A35 -THERMTRIP A60 GND A85 N/C A110 GND
A11 GND A36 USBP6- A61 PCIE_TX3+ A86 -RCIN
A12 MDI10- A37 USBP+ A62 PCIE_TX3- A87 A20GATE
A13 MDI10+ A38 -USBOC6 A63 N/C A88 PCIECLK
A14 GBE_CTREF A39 USBP4- A64 PCIE_TX2+ A89 -PCIECLK
A15 -SLPS3 A40 USBP4+ A65 PCIE_TX2- A90 GND
A16 SATA0TX+ A41 GND A66 GND A91 N/C
A17 SATA0TX- A42 USBP2- A67 N/C A92 N/C
A18 -SLPS4 A43 USBP2+ A68 PCIE_TX+1 A93 N/C
A19 SATA0RX+ A44 -USBOC2 A69 PCIE_TX-1 A94 N/C
A20 SATA0RX- A45 USBP0- A70 GND A95 N/C
A21 GND A46 USBP0+ A71 ATX0+ A96 GND
A22 SATA2TX+ A47 RTCVCC A72 ATX0- A97 +12V
A23 SATA2TX- A48 N/C A73 ATX1+ A98 +12V
A24 -SLPS5 A49 N/C A74 ATX1- A99 +12V
A25 SATA2RX- A50 LPC_SERIRQ A75 ATX2+ A100 GND
20
CES-471 User’s Manual
COM B
B1 GND B26 NC B51 GND B76 BTX2- B101 +12V
B2 ACTLED B27 WDT B52 N/C B77 BTX3+ B102 +12V
B3 -LFRAME B28 AC SDIN2 B53 N/C B78 BTX3- B103 +12V
B4 LAD0 B29 AC SDIN1 B54 N/C B79 BKL EN B104 +12V
B5 LAD1 B30 AC SDIN0 B55 PCIE_RX5+ B80 GND B105 +12V
B6 LAD2 B31 GND B56 PCIE_RX5- B81 BCLK+ B106 +12V
B7 LAD3 B32 ICHSPKR B57 N/C B82 BCLK- B107 +12V
B8 -LDRQ0 B33 I2C_CK B58 PCIE_RX4+ B83 BKL CRTL B108 +12V
B9 -LDRQ1 B34 I2C_DAT B59 PCIE_RX4- B84 5VDU B109 +12V
B10 LPC33CLK B35 THERM# B60 GND B85 5VDU B110 GND
B11 GND B36 USBP7- B61 PCIE_RX3+ B86 5VDU
B12 -ICHBTN B37 USBP7+ B62 PCIE_RX3- B87 5VDU
B13 SMBCLK B38 -USBOC4 B63 N/C B88 N/C
B14 SMBDATA B39 USBP5- B64 PCIE_RX2+ B89 CRT R
B15 GPI11 B40 USBP5+ B65 PCIE_RX2- B90 GND
B16 SATA1TX+ B41 GND B66 -PCIEWK B91 CRT G
B17 SATA1TX- B42 USBP3- B67 -LPCME B92 CRT B
B18 -SUSTAT B43 USBP3+ B68 PCIE RX1+ B93 CRT HS
B19 SATA1RX+ B44 -USBOC0 B69 PCIE RX1- B94 CRT VS
B20 SATA1RX- B45 USBP1- B70 GND B95 CRTDCLK
B21 GND B46 USBP1+ B71 BTX0+ B96 CRTDDAT
B22 NC B47 N/C B72 BTX0- B97 TVA PB
B23 NC- B48 N/C B73 BTX1+ B98 TVB Y
B24 PWR_GD B49 -SYSRST B74 BTX1- B99 TVC PR
B25 NC B50 -CBRST B75 BTX2+ B100 GND
21
CES-471 User’s Manual
COM C
C1 GND C26 AD4 C51 GND C76 GND C101 PEG RXP15
C2 PDD7 C27 AD6 C52 PEG RX0+ C77 N/C C102 PEG RXN16
C3 PDD6 C28 AD8 C53 PEG RX0- C78 PEG RX8+ C103 GND
C4 PDD3 C29 AD10 C54 N/C C79 PEG RX8- C104 +12V
C5 PDD15 C30 AD12 C55 PEG RX1+ C80 GND C105 +12V
C6 PDD8 C31 GND C56 PEG RX1- C81 PEG RX9+ C106 +12V
C7 PDD9 C32 AD14 C57 N/C C82 PEG RX9- C107 +12V
C8 PDD2 C33 -CBE1 C58 PEG RX2+ C83 N/C C108 +12V
C9 PDD13 C34 -PERR C59 PEG RX2- C84 GND C109 +12V
C10 PDD1 C35 -PLOCK C60 GND C85 PEG RX10+ C110 GND
C11 GND C36 -DEVSEL C61 PEG RX3+ C86 PEG RX10-
C12 PDD14 C37 -IRDY C62 PEG RX3- C87 GND
C13 PIORDY C38 -CBE2 C63 N/C C88 PEG RX11+
C14 -PDIOR C39 AD17 C64 N/C C89 PEG RX11-
C15 -PME C40 AD19 C65 PEG RX4+ C90 GND
C16 -GNT2 C41 GND C66 PEG RX4- C91 PEG RX12+
C17 -REQ2 C42 AD21 C67 N/C C92 PEG RX12-
C18 -GNT1 C43 AD23 C68 PEG RX5+ C93 GND
C19 -REQ1 C44 -CBE3 C69 PEG RX5- C94 PEG RX13+
C20 -GNT0 C45 AD25 C70 GND C95 PEG RX13-
C21 GND C46 AD27 C71 PEG RX6+ C96 GND
C22 -REQ0 C47 AD29 C72 PEG RX6- C97 N/C
C23 -PCIRST C48 AD31 C73 SDVODAT C98 PEG RX14+
C24 AD0 C49 -PIRQA C74 PEG RX7+ C99 PEG RX14-
C25 AD2 C50 -PIRQB C75 PEG RX7- C100 GND
22
CES-471 User’s Manual
COM D
D1 GND D26 -CBE0 D51 GND D76 GND D101 PEG TX15+
D2 PDD5 D27 AD9 D52 PEG TX0+ D77 P66DET D102 PEG TX15D3 PDD10 D28 AD11 D53 PEG TX0- D78 PEG TX8+ D103 GND
D4 PDD11 D29 AD13 D54 CFG9 D79 PEG TX8- D104 +12V
D5 PDD12 D30 AD15 D55 PEG TX1+ D80 GND D105 +12V
D6 PDD4 D31 GND D56 PEG TX1- D81 PEG TX9+ D106 +12V
D7 PDD0 D32 PAR D57 N/C D82 PEG TX9- D107 +12V
D8 PDDREQ D33 -SERR D58 PEG TX2+ D83 N/C D108 +12V
D9 -PDIOW D34 -STOP D59 PEG TX2- D84 GND D109 +12V
D10 -PDDACK D35 -TRDY D60 GND D85 PEG TX10+ D110 GND
D11 GND D36 -FRAME D61 PEG TX3+ D86 PEG TX10-
D12 IDEIRQ D37 AD16 D62 PEG TX3- D87 GND
D13 PAD0 D38 AD18 D63 N/C D88 PEG TX11+
D14 PAD1 D39 AD20 D64 N/C D89 PEG TX11-
D15 PAD2 D40 AD22 D65 PEG TX4+ D90 GND
D16 -PCS1 D41 GND D66 PEG TX4- D91 PEG TX12+
D17 -PCS3 D42 AD24 D67 GND D92 PEG TX12-
D18 IDERST D43 AD26 D68 PEG TX5+ D93 GND
D19 -GNT3 D44 AD28 D69 PEG TX5- D94 PEG TX13+
D20 -REQ3 D45 AD30 D70 GND D95 PEG TX13-
D21 GND D46 -PIRQC D71 PEG TX6+ D96 GND
D22 AD1 D47 -PIRQD D72 PEG TX6- D97 N/C
D23 AD3 D48 N/C D73 SDVOCLK D98 PEG TX14+
D24 AD5 D49 N/C D74 PEG TX7+ D99 PEG TX14-
D25 AD7 D50 PCISCLK D75 PEG TX7- D100 GND
23
CES-471 User’s Manual
Contact Information
Any advice or comment about our products and service, or
anything we can help you please don’t hesitate to contact with us.
We will do our best to support you for your products, projects a
business.
Taiwan Commate Computer Inc.
Address
TEL +886-2-26963909
FAX +886-2-26963911
Website
E-Mail
19F, No. 94, Sec. 1, Shin Tai Wu Rd., Shi Chih
Taipei Hsien, Taiwan
TUhttp://www.commell.com.twUT
TUinfo@commell.com.twUT (General Information)
TUtech@commell.com.twUT (Technical Support)
Commell is our trademark of industrial PC division
24
Loading...