COMMELL ADP-L2DXT User Manual

Page 1
ADP-L2DXT
User’s Manual
Edition 1.3
2015/05/01
Page 2
Copyright
Copyright 2011 all rights reserved. This document is copyrighted and all rights are reserved. The information in this document is subject to change without prior notice to make improvements to the products. This document contains proprietary information and protect ed by copyright. No part of this document may be reproduced, copied, or translated in any form or any means without prior written permission of the manufacturer. All trademarks and/or registered trademarks contains in this document are property of their respective owners.
Disclaimer
The company shall not be liable for any incidental or consequential damages resulting from the performance or use of this product. The company does not issue a warranty of any kind, express or implied, including without limitation implied warranties of merchantability or fitness for a particular purpose. The company has the right to revise the manual or include changes in the specifications of the product described within it at any time without notice and without obligation to notify any person of such revision or changes.
Trademark
All trademarks are the property of their respective holders.
Any questions please visit our website at TUhttp://www.commell.com.twUT.
1
Page 3
Packing List:
Hardware:
ADP-L2DXT adapter x1(ADP-L2DXT-D & ADP-L2DXT-T the same)
Cable kit:
Optional:
4PIN HSG to 2P
(OALP1-2P)
DF13 20PIN to DF13 20PIN
(OALLCD-ADPL2DXT)
DF13 20PIN to DF13 40PIN
(OALLCD-ADPL2DXT2)
DF13 20PIN to DF13 40PIN with SMBUS
(OALLCD-ADPL2DXT3)
2
Page 4
Bracket:
OPLA TE-D(Only ADP-L2DXT & ADP-L2DXT-D)
OPLA TE-DB9(Only ADP-L2DXT & ADP-L2DXT-T)
CD Content:
Driver & User’s Manual
3
Page 5
1.0 <Product Specification>
General Specification
Controller CHRONTEL CH7036 Features
Power Requirement +5V Accessories
OS WIN XP,WIN 7 Dimensions ( W x D ) 50mm x 40mm Temperature Operating within 0~60 centigrade
18-bit LVDS to 18/24-bit LV DS 18-bit LVDS to DVI 18-bit LVDS to VGA 18-bit LVDS to 18/24-bit LV DS + DVI 18-bit LVDS to 18/24-bit LV DS + VGA
1 x DF13 20-pin Cable ( For LVDS Input ) 1 x DC input Cable ( For power )
Ordering Code
ADP-L2DXT ADP-L2DXT-D ADP-L2DXT-T
18-bit LVDS to 18/24-bit LVDS , DVI , VGA convert module 18-bit LVDS to 18/24-bit LVDS , DVI convert module 18-bit LVDS to 18/24-bit LVDS , VGA convert module
4
Page 6
g
g
1.1 <Component Placement>
CN_LVDS_IN LVDS 18-bit sin
20 2
le input
DC_IN 5V DC Power input
19 1
2 1
1
CRT
DVI
20
2
CN_LVDS_OUT LVDS 18/24-bit sin
1 19
le output
5
Page 7
ADP-L2DXT User’s Manual
1.2 <Mechanical Drawing>
ADP-L2DXT
6
Page 8
ADP-L2DXT User’s manual
Bracket
OPLATE-D
OPLATE-DB9
unit: mm
7
Page 9
ADP-L2DXT User’s Manual
1.3 <Connector Reference>
Connector: CN_LVDS_IN Type: HIROSE DF13-20S
20 19
2 1
Pin Description Pin Description
1 LCDVCC 2 LCDVCC 3 GND 4 GND 5 RX0N 6 RX0P 7 GND 8 RX1N 9 RX1P 10 GND 11 RX2N 12 RX2P 13 GND 14 RXLCKN 15 RXLCKP 16 GND 17 SPC(SMBUSCLK) 18 SPD(SMBUSDATA) 19 GND 20 Will be defined
Connector: DC_IN Type: DF14 2-pin pitch=1.25mm
Pin Description Pin Description
1 GND 2 +5V
Connector: CN_LVDS_OUT T ype: HIROSE DF13-20S
20 19
2
1
2 1
Pin Description Pin Description
1 LCDVCC 2 LCDVCC 3 GND 4 GND 5 TXL0N 6 TXL0P 7 GND 8 TXL1N 9 TXL1P 10 GND 11 TXL2N 12 TXL2P 13 GND 14 TXLCKN 15 TXLCKP 16 GND 17 TXL3N 18 TXL3P 19 GND 20 GND
8
Page 10
ADP-L2DXT User’s manual
To setup the LCD, you need the component below:
1. A panel with LVDS interfaces.
2. An inverter for panel’s backlight power.
3. A LCD cable and an inverter cable.
4. A motherboard
For the cables, please follow the pin assignment of the connector to make a cable, because every panel has its own pin assignment, so we do not provide a standard cable; please find a local cable manufacture to make cables.
LCD Installation Guide:
1. Preparing the motherboard (LP-170),ADP-L2DXT, LCD panel and the backlight inverter.
2. Please check the datasheet of the panel to see the voltage of the panel, and set the
jumper JVLCD(LP-170) to +5V or +3.3V.
9
Page 11
ADP-L2DXT User’s Manual
3. You would need LVDS type cables
Board side
Panel side
4. To connect all of the devices well.
ADP-L2DXT LVDS Input side
ADP-L2DXT LVDS Output side
LVDS 18/24-bit single output
LP-170
Back
5V DC Power input
LVDS 18-bit single input
10
Page 12
ADP-L2DXT User’s manual
Contact Information
Any advice or comment about our products and service, or anything we can help you please don’t hesitate to contact with us. We will do our best to support you for your products, projects and business.
Taiwan Commate Computer Inc.
19F., No.94, Sec. 1, Xintai 5th Rd., Xizhi Dist., New Taipei City
Address
TEL +886-2-26963909 FAX +886-2-26963911
22102, Taiwan
Website
E-Mail
Facebook
Twitter https://twitter.com/Taiwan_Commate
TUhttp://www.commell.com.twUT TUinfo@commell.com.twUT (General Information)
TUtech@commell.com.twUT (Technical Support)
https://www.facebook.com/pages/Taiwan-Commate-Computer-Inc/547993955271899
Commell is the trademark of Taiwan Commate Computer INC.
11
Loading...