Page 1
ADP-3460
LVDS Convert Module
User’s Manual
Edition 1.0
2017/03/29
Page 2
ADP-3460 User’s Manual
Copyright
Copyright 2017, all rights reserved. This document is copyrighted and all rights are
reserved. The information in this document is subject to change without prior notice to
make improvements to the products.
This document contains proprietary information and protected by copyright. No part of
this document may be reproduced, copied, or translated in any form or any means
without prior written permission of the manufacturer.
All trademarks and/or registered trademarks contains in this document are property of
their respective owners.
Disclaimer
The company shall not be liable for any incidental or consequential damages resulting
from the performance or use of this product.
The company does not issue a warranty of any kind, express or implied, including
without limitation implied warranties of merchantability or fitness for a particular
purpose.
The company has the right to revise the manual or include changes in the specifications
of the product described within it at any time without notice and without obligation to
notify any person of such revision or changes.
Trademark
All trademarks are the property of their respective holders.
Any questions please visit our website at TUhttp://www.commell.com.twUT
Page 3
ADP-3460 User’s Manual
Packing List:
Please check the package content before you starting using the board.
1 x ADP-3460 LVDS Convert Module
1 x CN_DP Cable
(OALDP2T-L12 / 10406011)
1 x Power Cable
(OAL4P-XP-20 / 1040635)
1 x SMBus Cable
(OALSMBUS-20 / 1040636)
For AGP-3460
1 x SMBus Cable
(OALSMBUSE-20 / 1040637)
For AGP-3460E
Page 4
ADP-3460 User’s Manual
1. <Product Specification>
Mechanical & Environmental
Controller
PTN3460
Dimensions
41.92 x 33.23 mm
Temperature
Operating within 0~60 centigrade
Relative Humidity
10%~90%, non-condensing
Ordering Code
ADP-3460:DisplayPort to LVDS Module
ADP-3460E:DisplayPort to LVDS Module (For 3.5” and Pico Motherboard)
*Please give us 2nd LCD panel datasheet before ordering.
2. < Connector Location and Reference >
CN_DP
1
11
1392
40
CN_LVDS
1
2
5
6
JVLCD
5
1
CN_INV
DC_IN
4
1
CN_SMBUS
1
2
Page 5
ADP-3460 User’s Manual
CN_DP: DP to LVDS 11-pin connector
CN_LVDS:LVDS 40-pin connector (Model: HIROSE DF13-40DP-1.25V compatible)
Pin
Signal
Pin
Signal
1
Set by JVLCD
2
Set by JVLCD
3
GND
4
Detect (Active low)
5
B_LVDS_0-
6
A_LVDS_0-
7
B_LVDS_0+
8
A_LVDS_0+
9
GND10GND
11
B_LVDS_1-
12
A_LVDS_1-
13
B_LVDS_1+
14
A_LVDS_1+
15
GND16GND
17
B_LVDS_2-
18
A_LVDS_2-
19
B_LVDS_2+
20
A_LVDS_2+
21
GND22GND
23
B_LVDS_3-
24
A_LVDS_CLK-
25
B_LVDS_3+
26
A_LVDS_CLK+
27
GND28GND
29
B_LVDS_CLK-
30
A_LVDS_3-
31
B_LVDS_CLK+
32
A_LVDS_3+
33
GND34GND
35NC36
LVDS_DDCSCL
37NC38
LVDS_DDCSDA
39NC40
NC
Pin4 only need to be connected to GND
Pin
Signal
1
DP_0P
2
DP_0N
3
GND
4
DP_1P
5
DP_1N
6
GND
7
AUX_P
8
AUX_N
9
GND
10
HPD
11
3.3V
Page 6
ADP-3460 User’s Manual
CN_INV: LVDS 5-pin Backlight power connector
Pin
Signal
1
12V
2
Backlight Control
3
5V
4
GND
5
Enable Backlight
JVLCD: LVDS panel power select jumper
Jumper settings
Function
1-2
3.3V (Default)
2-3
5V
5-6
12V
CN_SMBUS: SMBus 2-pin connector
Pin
Signal
1
SMBCLK
2
SMBDAT
DC_IN: Power 4-pin connector
Pin
Signal
1
12V
2
GND
3
GND
4
5V
Page 7
ADP-3460 User’s Manual
3. < Install ADP3460 >
1. Preparing the Compatible Motherboard, ADP-3460, Power supply, LCD
panel and the backlight inverter.
2. Please check the datasheet of the panel to see the voltage of the panel,
and set the jumper JVLCD to +12V or +5V or +3.3V.
3. You would need a LVDS type cable.
1
2
5
6
JVLCD
For sample illustrator only
Panel side
Board side
Power Supply
Page 8
ADP-3460 User’s Manual
4. Connect LCD panel to the backlight inverter.
5. Connect LCD panel to ADP3460
6. Connect backlight inverter to ADP3460
Page 9
ADP-3460 User’s Manual
7. Connect Motherboard to ADP3460
8. Connect 4 pin power connector to ADP3460
Page 10
ADP-3460 User’s Manual
9. To connect all of the devices well.
Note: If you want to change LCD panel color or LVDS Bus, you
have to connect SMBus cable to motherboard (CN_SMBUS).
Power Supply
Page 11
ADP-3460 User’s Manual
Contact information
Any advice or comment about our products and service, or anything we can
help you please don’t hesitate to contact with us. We will do our best to support
you for your products, projects and business.
Taiwan Commate computer Inc.
Address
19F., NO.94, Sec. 1, Xintai 5th Rd., Xizhi Dist., New Taipei
City 22102, Taiwan.
TEL
+886-2-26963909
FAX
+886-2-26963911
Website
www.commell.com.tw
E-mail
info@commell.com.tw (General infomation)
tech@commell.com.tw (Technical Support)
Commell is a brand name of Taiwan Commate computer Inc.
Loading...