• Thank you for purchasing COMMAX products.
• Please carefully read this User’s Guide (in particular, precautions for safety) before using a product and follow
instructions to use a product exactly.
• The company is not responsible for any safety accidents caused by abnormal operation of the product.
• Thank you for purchasing COMMAX products.
• Please carefully read this User’s Guide (in particular, precautions for safety) before using a product and follow
instructions to use a product exactly.
• The company is not responsible for any safety accidents caused by abnormal operation of the product.
COLOR VIDEO DOOR PHONE CDV-35HM
User Manual
1
Contents
1. Greetings
1. Greetings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
2. Warnings and cautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
3. Part Names and Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
4. Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
5. Installation and Wiring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
6. Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
7. Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
8. Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Instructions for users
The product is registered for electromagnetic compatibility for
household use and can be used in all areas including
residential areas.
Level-B
product
Thank you very much for purchasing of COMMAX products.
Please read carefully this user manual and follow its rules.
This intercom can be used in offices, and shopping outlets, and provide
convenience to use communication on long distances.
2. Warnings and caution
2
Please follow the things described below in order to prevent any danger or
property damage.
Warning
Caution
Prohibition.
No disassembly
No touch
Must follow strictly.
Shows plugging out the power cord
without an exception
Shows the warning and caution for an electric shock.
Shows the warning and caution for a fire.
It may cause a minor damage or injury if violated.
It may cause a serious damage or injury if
violated.
Power & Installation
Warning
Please don’t use several
products at the same time on
one power socket.
·It may cause a fire due to an
a
bnormal overheating.
Please don’t bend the power
cable excessively or it may
cause an electric shock.
·fire when using a damaged
power cable.
Please don’t handle the power
cable with a wet hand.
·It may cause an electric
shock.
Please plug out the power
cable from the socket when
not using it for a long period
of time.
·It may shorten the product
lifespan or cause a fire.
Please don’t install the
product in the place where
there is much oil, smoke or
humidity.
·It may cause an electric
shock or fire.
Please don’t install the
product with the lightening
and thunder.
·It may cause an electric
shock or fire.
Please don’t use and connect
this product with other
products with different rated
voltage
·It may cause a disorder or
fire.
When installing the product
that generates heat, please
install the product away from
the wall (10cm) for the
ventilation.
·It may cause a fire due to
the increased internal
temperature.
3
Cleaning & Use
Please don’t disassemble,
repair or rebuild this product
arbitrarily (please contact the
service center if a repair is
needed.
·It may cause an electric
shock or fire.
Please plug the power cable
firmly into the inner end
·It may cause a fire.
Please hold the plug tightly
when unplugging the power
cable (a part of the copper
wire may be disconnected if
the grabbing is only made on
the cord when pulling out the
cable).
·It may cause an electric
shock or fire
When connecting the power
cables after cutting the cable,
please install the product with
power off
·It may cause an electric
shock or fire
When installing the product,
please fix it firmly while using
the wall-mounting unit and
screws.
·It may cause an injury from
the falling object.
Please be careful when using
an AC circuit breaker since
there is a possibility of an
electric shock.
When cleaning the product,
please rub it with a soft and
dry cloth after plugging out
the power cable. (Please don’t
use any chemical products
such as wax, benzene, alcohol
or cleanser.)
Please don’t drop the product
on the ground and don’t apply
a shock .
·It may cause a failure.
Please use the designated
connection cable within the
maximum calling distance
designated for the product
·It may reduce the product
performance.
Please check the use voltage
and current for the DC-only
products and use the
appropriate rectifier.
·It may cause a fire.
Please avoid direct rays of the
sun or heating devices at a
time of installation.
·It may cause a fire.
Please don’t install the
product on an unstable place
or small support board.
·It may cause an injury if it
falls down while in use.
If an abnormal sound, burning
smell or smoke is coming out
of the product, please plug out
the power cable and contact a
service center.
·It may cause an electric
shock or fire.
Please don’t insert any
metallic or burnable materials
into the ventilation hole.
·It may cause an electric
shock or fire.
Please use only the designated
batteries for the products of
using DC power.
·It may cause an electric
shock or fire.
Cleaning & UsePower & Installation
Warning
Caution
4
3. Part names and functions
No. Part Name No. Part Name No. Part Name
1 Monitor 7 Door Open Button 13 DOWN Button
2 Speaker 8 Interphone Button 14 Calling volume Adjustment
3 Talk Button 9 Power Indicator (LED) 15 Talking volume Adjustment
4 Monitoring Button 10 Menu Button 16 Power Switch
5 No function 11 Select Button 17 No function
6 Microphone 12 UP Button 18 External Connection Terminal
* Calling Volume Adjustment : Use to adjust calling sound from door unit.
* Talking Volume Adjustment : Use to adjust talking volume with door unit.
* You can adjust brightness, contrast, color of display with menu, select buttons.
* Camera setting : Possible to use 2 cameras, by pulling out the jumper on back of monitor.
* Note : Monitor is set to use 1 camera when it is manufactured.
☞ This product is designed only for connecting with color door cameras.
In case of connecting with B/W door cameras, malfunction could occur as well as delayed reaction time.
Visitor calls
1. When a visitor presses the talk button on the camera, the monitor emits the chime melody and shows
the visitor’ s image on the screen.
2. Press the TALK( ) button to talk with the visitor.
(Maximum 60 seconds are given to talk with the visitor.)
3. To finish talking with a visitor, press TALK( ) button to turn off the screen and quit the talk
mode(return to stand-by mode).
4. While you are talking with the visitor, press DOOR OPEN( ) button to open the door.
When the door is opened, you will hear beep sound.
Talking with interphone.
1. Press TALK button in stand-by status. You will hear beeping sound
Press INTERPHONE( ) button to call interphone. You are able to talk after the interphone is
picked up. (Maximum 60 seconds are given to talk with interphone.)
2. In the case that the interphone calls the monitor, electronic melody sounds from the monitor.
Press TALK( ) button to talk with interphone.
3. When you receive a call from door camera while the monitor and interphone are in calling, the monitor
shows the visitor’ s image, and it is available to talk between monitor, interphone and door camera.
Note : When you finished to talk with visitor or interphone, you must press the TALK button to
turn off the talking mode.
Monitoring
1. Press MONITOR( ) button to see image from the door camera.
(Monitoring is continued for 30 seconds. )
2. You may connect up to 2 cameras, and when you press MONITOR button, the monitor shows Camera
#1 ⇨ Camera #2 ⇨ Turned-off screen in sequence.
Adjustment of the brightness or color on the screen.
While on the talking or monitoring mode, you can adjust the display using buttons on right side of the
monitor.
1. Press MENU button to see the main menu display.
2. Press UP/DOWN button to move and press SELECT button to enter to the menu.
3. Press UP/DOWN button to adjust the volume.
4. Press SELECT button to save and return to main menu.
5. Press MENU button to quit from menu mode
5
4. Operation
6
Save of video or image while on monitoring or talking mode.
1. To save as video. (Max. 10 EA, each 5 seconds of videos are saved) Press and hold the SELECT button,
to enter RECORD mode. When you enter RECORD mode, the word ‘ record’ is shown up and
disappear on right-top side of the screen.
2. To save as picture. (Max. 128 cut of images are saved). Press briefly the SELECT button, to enter
CAPTURE mode. When you enter CAPTURE mode, the word ‘ capture’ is shown up and disappear
on right-top side of the screen. After saving all 128 images, new image is over-written from the 1st saved
image.
Watching saved video or image, after monitoring or talking.
1. Press and hold the MENU button on right side of monitor, and you will see the saved video or images.
2. Use UP/DOWN button to select the video or file you want to see.
a. Selecting on the screen divided in four is made by pressing the UP button, which moves towards its
bottom right-corner from the top-left corner of the screen.
b. Selecting on the screen divided in four is made by pressing the DOWN button, which moves towards
its top-left corner from the bottom right-corner of the screen.
c. Page will be turned over to the next one at a time when UP button is pressed long time.
d. Page will be turned over to the previous one at a time when DOWN button is pressed long time.
3. Press the SELECT button to enlarge the saved picture.
4. Press the MENU button to return to the screen divided in four.
Deleting images manually.
1. Press the MENU button for long time to view the saved images.
2. Saved images can be chosen and shown on the screen with UP/DOWN buttons.
a. Selecting on the screen divided in four is made by pressing the UP button, which moves towards its
bottom right-corner from the top-left corner of the screen.
b. Selecting on the screen divided in four is made by pressing the DOWN button, which moves towards
its top-left corner from the bottom right-corner of the screen.
c. Page will be turned over to the next one at a time when UP button is pressed long time.
d. Page will be turned over to the previous one at a time when DOWN button is pressed long time.
3. Press the SELECT button to enlarge the saved picture.
4. An inquiry of picture deletion shall be shown on the screen when SELECT button is pressed.
5. Choose either YES or NO with UP/DOWN buttons and press the SELECT button to execute it.
(After execution of deleting process, next image of the deleted file shall be shown on the screen.)
7
MENU Function.
1. TIME : Time setting function
a. Press the MENU button in standby status to enter the MENU screen.
b. Move to TIME section with UP/DOWN buttons and press the SELECT button.
c. Choose YEAR, MONTH, DAY, HOUR and MINUTE using UP/DOWN buttons and press the
SELECT button to enter into subsection setting mode.
d. Set the time of each section on the menu with UP/DOWN buttons and press the SELECT button
to end the setting.
e. After completion of time setting, press the MENU button to end time setting menu and return to
previous MENU screen.
2. DELETE ALL : Function for erasing all saved video/images
a. Press the MENU button in standby status to enter the MENU screen.
b. Move to DELETE ALL section with UP/DOWN buttons and press the SELECT button.
c. After entering DELETE ALL menu, YES/NO menu shall be shown to confirm your decision.
Press the SELECT button to confirm your order after selecting it with UP/DOWN buttons.
d. It will return to main MENU automatically after completion of selection.
3. AUTO SAVE : Function to save visitor’ s image automatically
a. Press the MENU button in standby status to enter the MENU screen.
b. Move to AUTO SAVE section with UP/DOWN buttons and press the SELECT button.
c. After entering AUTO SAVE mode, choose the one among CAPTURE/RECORD/NONE with
UP/DOWN buttons and press the SELECT button.
d. It will return to main MENU automatically after completion of selection.
- CAPTURE : Take a picture and save it automatically when there is a call from the door camera unit.
- RECORD : Save video image for 5 seconds when there is a call from the door camera
- NONE : Turn off CAPTURE and RECORD functions.
TIME
DELETE ALL
AUTO SAVE
LANGUAGE
FACTORY SET
EXIT
[MENU]
8
4. LANGUAGE : Function for selecting language
a. Press the MENU button in standby status to enter the MENU screen.
b. Move to LANGUAGE section with UP/DOWN buttons and press the SELECT button.
c. After entering LANGUAGE mode, choose the one between ENGLISH/RUSSIAN with
UP/DOWN buttons and press the SELECT button.
d. It will return to main MENU automatically after completion of selection.
5. FACTORY SET : Function for Initializing the setting
a. Press the MENU button in standby status to enter the MENU screen.
b. Move to FACTORY SET section with UP/DOWN buttons and press the SELECT button.
c. After entering FACTORY SET mode, choose either YES or NO with UP/DOWN buttons and
press the SELECT button.
d. It will return to main MENU automatically after completion of selection.
Caution
- Every saved picture and video image shall be deleted by execution of FACTORY SET.
- Bright, Contrast and Color value will be initialized by execution of FACTORY SET.
- AUTO SAVE mode shall be changed to CAPTURE mode after execution of FACTORY SET.
6. EXIT : Function to exit out of MENU
a. Press the MENU button in standby status to enter the MENU screen.
b. Move to EXIT section with UP/DOWN buttons and press the SELECT button.
5. Installation and Wiring
1) Monitor Installation
2) Standard Height of Monitor
SCREW T4X18 (4EA)
Unit : cm
Unit : cm
SCREW M3X6 (1EA)
3) Wiring Diagram
MONITOR
CAMERA 1
CAMERA 2
1 2 3 4
1 2 3 4 1 2 3 4 1 2 3 4
1 2 3 4 1 2 3 4 1 2 3 4
PROGRAM
CAMERA 2
SELECT
INTERPHONE
9
10
7. Specifications
Monitor Manual
T4X18(4EA)
Wall bracket
Mounting Screw
M3X6(1EA)
Monitor
Fixing Screw
Connector
4p(2EA)
2P SHUNT
(Only No. 1 camera is available
if you insert 2P shunt(short pin)
Braket
6. Package Contents
Model
CDV-35HM
Wiring CAMERA : 4wires, INTERPHONE 4wires
Power source 100-240V~, 50/60Hz (FREE VOLTAGE)
Power consumption MAX : 10W, Stand-by : 4.5W
Communication way HANDS FREE type (Voice Switch)
Display 8.89Cm(3.5”) COLOR TFT-LCD
Call sound COMMAX chime : 2 times, Interphone : Electric chime
Video duration time Stand-by : 30 seconds, On the line : 60 seconds
Distance Entrance : 50m (Ø0.5), Interphone : 20m (Ø0.65)
11
If you think that the product has trouble, please first check below contents before you ask a repair.
●
The power supply is
not on.
●
All works are stopped
Troubles
1.The power supply
cord is missing or not.
2.The power supply switch
(down) is off or not.
Check Point
1. Please connect the
power supply cord
2. Please turn on the power
supply switch (down)
pushing to the right.
●
A Call operation is not
performed.
(Door, Interphone function)
1.The wiring between other
units is connected correctly
in good order or not.
2. The wiring is missing or not.
1.
Please refer to connection
related page and manage.
2.
Please connect correctly
to the terminal.
●
The product does not
produce the sound.
(Call volume, Talk volume)
1. A sound volume lies
in minimum or not.
1. Please adjust the sound
volume properly turning
to the up, as you want.
●
The screen is dark.
●
The screen is strange.
1. There is a strong reflected light behind the
visitor or not.
2. The screen control is
adjusted correctly.
1. Please change the angle
of camera lens.
Actions
8. Trouble shooting.
12
Memo
513-11, Sangdaewon-dong, Jungwon-gu, Seongnam-si, Gyeonggi-do, Korea
Int’l Business Dept. Tel. : +82-31-7393-540~550 Fax. : +82-31-745-2133
Web site : www.commax.com
Printed In Korea / 2011.03.104
PM0735HM0010
Loading...