Commax DRC-700S User Manual
User Manual
COMMAX LOBBY PHONE DRC-700S
• Thank you for purchasing COMMAX products.
• Thank you for purchasing COMMAX products.
• Please carefully read this User’s Guide (in particular, precautions for safety) before using a product and follow
• Please carefully read this User’s Guide (in particular, precautions for safety) before using a product and follow
instructions to use a product exactly.
instructions to use a product exactly.
• The company is not responsible for any safety accidents caused by abnormal operation of the product.
• The company is not responsible for any safety accidents caused by abnormal operation of the product.
Part names
①
TFT-LCD Screen
⑦
Security Button
②
Mike
⑧
Call Button
③
RF CARD Receiver
⑨
Program Button
④
Camera
⑩
Speaker
⑤
Dial Button
⑪
LAN
⑥
Electric Key Button
2
1. Main Screen Setting
Skin Theme
Flip Clock
Red Clock
Green Clock
Black Clock
Icon
Description
Icon
Description
Lan Connection
Registered server status
Display out post lobby
phone
Not Registered server status
Display building lobby
phone
RF-Card Data save status
1.1. Main Screen
1.2. Status
3
2. Security Call
① Push (Security Guard Post) Button
② Push (Call) button
③ Call sound is ringing and call Security Guard Post.
④ Call Security Guard Post when guard answer call. (Time: 1 min.)
⑤ Press “X” button when terminate call.
⑥ Security Guard push ‘Open door’ button, “Door is open” voice
comment then door is open.
⑦ If line is busy, call it later.
Picture1. Call security Guard
※ This is to call up the registered guard stations in advance by a
manager
4
3. Call house
3.1. Communication call between residence
I. When building number is set in advance:
When building No. already registered to Call Prefix
Picture2. Screen for registering house No.
① Input unit No. to key board.
Ex) Unit 101 input ‘101’
② Push (call) button.
③ Ringing call sound and call unit.
④ When tenants answer call, calling is on. (Max. time: 1 min)
⑤ Press “X” button when terminate call.
⑥ Tenant push ‘Open door’ button, “Door is open” voice comment
then door is open
5
II. When building number is NOT set in advance:
When building number hasn’t been registered Call Prefix yet.
Picture3. Building house No. register screen
① Input Building No. to key board.
Ex) Building 101 input ‘101’
② Input unit No. to key board.
Ex) Unit 101 input ‘101’
③ Push (call) button.
④ Ringing call sound and call unit.
⑤ When tenants answer call, calling is on. (Max. time: 1 min)
⑥ Press “X” button when terminate call.
⑦ Tenant push ‘Open door’ button, “Door is open” voice comment
then door is open
6
Loading...