Commax DRC-4U User Manual

User Manual

Color Door Camera DRC-4U

• Thank you for purchasing COMMAX products.

• Please carefully read this User’s Guide (in particular, precautions for safety) before using a product and follow

instructions to use a product exactly.

• The company is not responsible for any safety accidents caused by abnormal operation of the product.

Contents

1. Introduction ................................................... 2

2. Important Safeguard ..................................... 3

3. Part Names................................................... 4

4. Installation & Wiring ...................................... 6

5. Package contents ......................................... 7

6. Specification ................................................ 8

1

1. Introdution

Your unit is designed so it can be flush mounted on the or used. When flush mounted on the wall, the stand permils you to the
unit for an gular of unit view. The model number is located on the bottom and record the serial number in the space provided
below(available). Refer to these numbers whenever you call upon your COMMAX dealer regarding this product.

Model No. Serial No.

To prevent fire or shock hazard, do not expose the unit to rain or moisture.

“

This symbol is intended to alert the use to the presence of uninsulated
may be of sufficient magnitude to constitute a risk of electric shock to persons.

This symbol is intended to alert the use to the presence of important operating and maintemance(servicing) instructions in the
literature accompanying the appliance

“

dangerous Voltage

”

”

within the product’s enclose that

caution

Rosk of electric shock

do not open

CAUTION: To reduce the risk of electrix shick, do not remove cover(or back) no user-serviceable

part sinside refer servicing to quaured service personnel

2

2. Important Safeguard

▲

Damage Requiring Service: This equipment from the power source and source and refer servicing to qualified service per-

sonnel under the following conditions:

ⓐ when the power is damaged.
ⓑ if liquid has been spilled or objects have fallen into the unit
ⓒ if the equipment has been exposed to rain or water.
ⓓ if the equipment has been dropped or otherwise damaged.
ⓔ when the equipment exhibits a distinct change in performance- this indicates a need for service.

▲

Water and Moisture: Do not use this product near water, for example, near a bath tub, wash bowl, kitchen sink, or laundry

▲

Accessories: The product may fall, causing serious injury to a child or adult, and serious damage to the appliance. Any

▲

Object and Liquid Entry: Never push objects of any kind into this product through openings as they may touch dangerous

▲

Lightning: For added protection for this product before a lightning storm, or when it is left un attached and un used for long

tub, in a wet basement, or near a swimming pool, and the like.

mounting of the manufacture
facturer.

voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any
kind on the product.

periods of time, unplug it from the wall outlt and disconnect the other system. This will prevent damage to the prod­uct due to lightning and power-line surges. If you live in an area heavily prone to lightning storms, it is recom­mended that you invest in power-line, telephone-line, RFcable and actuator/ polarization surge protectors to protect
your appliance system from possible damage

’s instructions, and should use a mounting accessory recommended by the manu-

3

3. Part Names.

4

① Camera Lens : Transferring image
②

Speaker : It delivers voice to a visitor

③

Call Button : Call a residence

④

Microphone : It delivers voice from a visitor

⑤

LED & Illumination Sensor : Offer clear image at night

⑥

Camera Angle Adjustment

⑦

Volume Control (driver available)

⑧

Monitor Connection Terminal

⑨

Wall Bracket

⑩

Door Release Connection Cable

5

4.

Installation & Wiring

SCREW M3X8(1EA)

[FIG-1] [FIG-2]

SCREW T4X18(2EA)

6

① Fix a bracket on a wall with screws
②

Wiring #1, 2, 3, 4 on the back side of a door camera with a monitor as shown in

[FIG-2]

③

Put a door camera unit into a wall bracket

④

Wire door release connection terminal as shown in [FIG-2]

⑤

Tighten a screw at the top side of a door camera. [FIG-1]

5. Package contents

Connector

(4PX200)

Door Camera Bracket Bracket

Screw(2EA)

(T4X18)

7

Manual

Camera

Screw(1EA)

(M3X8)

6. Specification

Model No. DRC-4U
Rated Voltage 12V (Supplied from monitor)
Wiring 4 wires(polarity)to a monitor

2 wires(non-polarity)to a electric door look
Video Transmission Standard NTSC or PAL STANDARD.
Sensor Type C-MOS(1/3")
Transmission Full Duplex
Minimum Illumination 0.1 Lux(within300mm)
LED Embedded LED(Night working)
Effective Viewing Angle (H)81°,(V)56°
Angle Adjustment Up / Down / Left / Right : Every 10°
Operating Temperature -10°C(tested up to -40°C)~+40°C
Dimension (mm) 140(W) x 153(H) x 45(D)
Installation between a Door Diameter(pie) Ø0.5 Ø0.65 Ø0.8 Ø1
camera and a monitor(TIV Cable) Distance(meter) 28m 50m 70m 115m

8

513-11, Sangdaewon-dong, Jungwon-gu, Seongnam-si, Gyeonggi-do, Korea
Int’l Business Dept. : Tel.; [phone]~550 Fax.; [phone]
Web site : www.commax.com

PM104U000010

Printed In Korea / 2014.02.105