Commax DRC-4G User Manual

Page 1
Color Door Camera DRC-4G
User Manual
Thank you for purchasing COMMAX products.
Please carefully read this User’s Guide (in particular, precautions for safety) before using a product and follow
instructions to use a product exactly.
The company is not responsible for any safety accidents caused by abnormal operation of the product.
Page 2
1. Overview
Camera Lens
Speaker
Call Button
Angle Adjustment Lever
Volume Adjuster Monitor Connection Terminal
Door Release Connection Line
2. Wiring and Installation
1. Match the fix the whole in the wall and the fixing
2. Match and connect monitor line as shown below (#1: Audio, #2: GND, #3: DC12V, #4: Video)
3. Adjust camera location on the wall by checking
4. Connect the Door Release Connection Line as
5. Tighten a screw at the bottom side of the camera
fixing bracket [FIG.1]
[FIG.2]
the image on monitor screen and fix its location
shown below [FIG.2]
[FIG.1]
SCREW M3X8 (1EA)
Position of camera
66.5
°
Screw Hole
SCREW T4X18 (2EA)
Power Source Door Release
Wiring
Installation
[FIG.1]
[FIG.2]
Page 3
4.
Specification
DRC-4G
DC 12V (Supplied t o monitor)
4 wires (pola
rity) to a monitor
2 wires (non-pol
arity) to a electric door lock
NTSC or PAL STANDARD.
CMOS IMAG
E SENSOR
Full duplex
0.1 Lux (within 300mm)
Embedde d white LED (night working)
Horizontal 82°, Vertical 66.5 °
Upward
-10(tested up to -40°C)~ +40
30 0g
101
(W) x 142(H) x 32(D)
Diameter(pie) Ø
0.5 Ø0.6
Ø
0.8 Ø1
Distance(meter)
28m 50m 70m 115m
Model No.
Rated Voltage
Video Tran
smission Standard
Sensor Type
Transmission
Minimum Illumination
LED
Effective Viewing Angle
Angle Adjustment
Operating Temperature
Weight (g)
Dimension (mm)
Installation between a door
camera and a monitor(TIV Cable)
Wiring
5. Contents
Door camera
Bracket
Camera fixing
screw
Braket fixing
screw
Volume
Sheet
Page 4
Printed In Korea / 2016 .04.105
513-11, Sangdaewon-dong, Jungwon-gu, Seongnam-si, Gyeonggi-do, Korea Int’l Business Dept. : Tel.; +82-31-7393-540~550 Fax.; +82-31-745-2133 Web site : www.commax.com
Loading...