Page 1
VIDEO PHONE CAMERA
OUTDOOR CAMERA
DRC-40BS/40CS
SPECIFICATION
Model
Spec.
Pick Up Device
Wiring
(House/Door Releasa)
Related voltage
Conversation Method
Angle Adjustment
Horizontal/Vetical Scanning
Min. Illumination
Temperature
Dimension
weight
B/W C.C.D 1/3” COLOR C.C.D 1/4”
4 wires in NonPolarity 2 wires in NonPolarity
12V DC (from a mointor)
Simultaneous Conversation
H: 68。H: 55。 Up: 8。Down: 12。
15.734KHz/60Hz, 15.625KHz/50Hz
0 LUX(300mm from Camera)
-10℃ ~ +40℃
99.5(W)×141.5(H)×37(D)mm
300g
DRC-40BS DRC-40CS
VIDEO PHONE CAMERA
OUTDOOR CAMERA
DR C -4 0 BS / 40 C S
SPECIFICATION
Model
Spec.
Pick Up Device
Wiring
(House/Door Releasa)
Related voltage
Conversation Method
Angle Adjustment
Horizontal/Vetical Scanning
Min. Illumination
Temperature
Dimension
weight
B/W C.C.D 1/3” COLOR C.C.D 1/4”
4 wires in NonPolarity 2 wires in NonPolarity
12V DC (from a mointor)
Simultaneous Conversation
H: 68。H: 55。 Up: 8。Down: 12。
15.734KHz/60Hz, 15.625KHz/50Hz
0 LUX(300mm from Camera)
-10℃ ~ +40℃
99.5(W)×141.5(H)×37(D)
300g
DRC-40BS DRC-40CS
• Thank you for purchasing our COMMAX product.
• Please carefully read this User Guide (in particular, precautions for safety)
before using the product and follow the instructions to use your productexactly.
• The company is not responsible for any safety accidents caused in abnormal
operation of the product.
◆ Package contents
SCREW : T4X18mm 2EA, M3X10mm 1EA
Manual
Page 2
UP
上
SCREW
(M3×10mm)
SCREW
(T4×18mm)
① ② ③ ④
LOWER
UPPER
UP 上
5
1
2
4
11
3
6
10
8
7
12
9
170cm
60cm
145cm
55
1 2 1 2 3 4
Part Names.
Wiring and Installation.
7. Monitor Connection terminal.
8. Description Label.
9. Bracket mounting a wall
10. Angle adjustment lever.
11. Power lamp :
When talking with a monitor, it is on.
12. Door Release connection terminal
1. Protection shield.
2. Lamp at night
3. C.C.D Camera Lens
4. Speaker
5. MIC.
6. Call button.
1. Fix a bracket to wall with screws (M3 x 10mm) supplied.
2. Please fix the desired angle of a lens with angle adjustment lever before fixing it.
3. Put a camera unit into a bracket.
4. Recheck the desired position of a camera unit to be installed through the image
of a monitor.
A Monitor A door camera unit
2010.03.101 2010.03.101
UP
上
SCREW
(M3×10mm)
SCREW
(T4×18mm)
① ② ③ ④
LOWER
UPPER
UP 上
5
1
2
4
11
3
6
10
8
7
12
9
170cm
60cm
145cm
55
1 2 1 2 3 4
DRC-22BS
DRC-22CS
DPV-2LH
CDV-52A
Part Names.
Wiring and Installation.
7. Monitor Connection terminal.
8. Description Label.
9. Bracket mounting a wall
10. Angle adjustment lever.
11. Power lamp : When talking with a monitor, it is on.
12. Door Release connection terminal
1. Protection shield.
2. Lamp at night
3. C.C.D Camera Lens
4. Speaker
5. MIC.
6. Call button.
1. Fix a bracket to wall with screws (M3 x 10mm) supplied.
2. Please fix the desired angle of a lens with angle adjustment lever before fixing it.
3. Put a camera unit into a bracket.
4. Recheck the desired position of a camera unit to be installed through the image
of a monitor.
A Monitor A door camera unit
Loading...