Commax DR-2AG/RF1 User Manual

Download

Page 1

• Thank you for purchasing COMMAX products.

• Please carefully read this User’s Guide (in particular, precautions for safety) before using a product and follow

instructions to use a product exactly.

• The company is not responsible for any safety accidents caused by abnormal operation of the product.

User Manual

www.safemag.ru

Lobby Camera Phone DR-2AG/RF1

• Thank you for purchasing COMMAX products.

• Please carefully read this User’s Guide (in particular, precautions for safety) before using a product and follow

instructions to use a product exactly.

• The company is not responsible for any safety accidents caused by abnormal operation of the product.

 54 

Page 2

Table of Contents

www.safemag.ru

1. Greeting .....................................................................................................................................1

2. Safety Warning & Caution..........................................................................................................2

3. Parts...........................................................................................................................................4

4. Password type............................................................................................................................8

5. How to input Password ..............................................................................................................9

6. Check house Password ...........................................................................................................12

7. Set building Number and ID to Lobby panel ...........................................................................13

8. RF card key appliances ...........................................................................................................15

9. Set to be forced opening the Main Entrance door by SecuMAX ............................................23

10. Door opening hours setting ..................................................................................................24

11. Line-by-line call function Setting ............................................................................................25

12. Automatic calling function of guard station configuration .....................................................26

13. Call Tones selection .............................................................................................................27

14. Setting the Number of Call Ring Repetitions .........................................................................28

15. Door release by external information forwarding to SecuMAX way ......................................29

16. Set to be forced opening the Main Entrance door by SecuMAX ...........................................30

17. Setting the time to trigger the notice to be forced door forwarding to SecuMAX ..................31

18. Selecting the Wiring Method .................................................................................................32

19. Registration of Household Unit Number ................................................................................33

20. Checking Status of Household Units......................................................................................35

21. Setting the Keypad LED Option ............................................................................................37

22. Activation of Electronic Key (Password) Function .................................................................38

23. Setting the Volume of Voice and Beep Sound ......................................................................39

24. Method of name data sending................................................................................................40

25. How to receive the name of the data .....................................................................................41

26. Setting the door release by building password .....................................................................42

27. When you want to call a household .......................................................................................44

28. When you want to call a Guard Station..................................................................................45

29. Door Release by Unit Password ...........................................................................................45

30. Supplement (summary of various programs).........................................................................46

31. Wiring Information..................................................................................................................48

32. Miscellaneous ........................................................................................................................52

33. Part list ...................................................................................................................................52

34. Specifications and Features ..................................................................................................52

35. RF-ID Model (Optional) .........................................................................................................53

1. Greeting

* Thank you for purchasing a COMMAX product * This product is a high tech Main Entrance interphone that supports electronic

Please read this manual carefully.

 1 

Page 3

2. Safety Warning & Caution

www.safemag.ru

Please follow the things described below in order to prevent any danger or property damage.

Prohibition.

Warning

Caution

It may cause a serious damage or injury if violated.

It may cause a minor damage or injury if violated.

No disassembly

No touch

Must follow strictly.

Shows plugging out the power cord without an exception

Shows the warning and caution for an electric shock.

Shows the warning and caution for a fire.

Warning

Please don’t use several products at the same time on one power socket.

·It may cause a fire due to an ab

normal overheating.

Please don’t install the product in the place where there is much oil, smoke or humidity.

·It may cause an electric shock or fire.

Power & Installation

Please don’t bend the power cable excessively or it may cause an electric shock.

·fire when using a damaged power cable.

Please don’t install the product with the lightening and thunder.

·It may cause an electric shock or fire.

Please don’t handle the power cable with a wet hand.

·It may cause an electric shock.

Please don’t use and connect this product with other products with different rated voltage

·It may cause a disorder or

fire.

Please plug out the power cable from the socket when not using it for a long period of time.

·It may shorten the product lifespan or cause a fire.

When installing the product that generates heat, please install the product away from the wall (10cm) for the ventilation.

·It may cause a fire due to the increased internal temperature.

 2 

Page 4

Warning

www.safemag.ru

Please don’t disassemble, repair or rebuild this product arbitrarily (please contact the service center if a repair is needed.

·It may cause an electric shock or fire.

Cleaning & UsePower & Installation

Please plug the power cable firmly into the inner end

·It may cause a fire.

Please be careful when using an AC circuit breaker since there is a possibility of an electric shock.

If an abnormal sound, burning smell or smoke is coming out of the product, please plug out the power cable and contact a service center.

·It may cause an electric shock or fire.

Caution

Please hold the plug tightly when unplugging the power cable (a part of the copper wire may be disconnected if the grabbing is only made on the cord when pulling out the cable).

·It may cause an electric shock or fire

Please check the use voltage and current for the DC-only products and use the appropriate rectifier.

·It may cause a fire.

Please don’t insert any metallic or burnable materials into the ventilation hole.

·It may cause an electric shock or fire.

When connecting the power cables after cutting the cable, please install the product with power off

·It may cause an electric shock or fire

Please avoid direct rays of the sun or heating devices at a time of installation.

·It may cause a fire.

Please use only the designated batteries for the products of using DC power.

·It may cause an electric shock or fire.

When installing the product, please fix it firmly while using the wall-mounting unit and screws.

·It may cause an injury from the falling object.

Please don’t install the product on an unstable place or small support board.

·It may cause an injury if it falls down while in use.

Cleaning & Use

When cleaning the product, please rub it with a soft and dry cloth after plugging out the power cable. (Please don’t use any chemical products such as wax, benzene, alcohol or cleanser.)

Please don’t drop the product on the ground and don’t apply a shock .

·It may cause a failure.

Please use the designated connection cable within the maximum calling distance designated for the product

·It may reduce the product performance.

 3 

Page 5

3. Parts

www.safemag.ru

3-1. The name of parts

NO. Function NO. Function

1 Speaker 2 OLED Display 3 RFID card receiver

Name Searching button /

Menu Page Button Up & Down scroll button/

Program Button

6 Call Button 7 Number button 8 Cancel Button

9 C-MIC 10 Electric Key Button 11 Line connecting button 12 Reset Button 13 Circuit Connect Switch

 4 

Page 6

3-2. Important function

www.safemag.ru

✽ Starting OLED display (Power ON OLED display)

✽ RF/ID Receiver ③(Optional)

When open door by wireless card key, please tag it to this points.(See bellow photo). "Open door" message and Icon will be displayed in OLED.

✽ Call Button ⑧(E : Press)

Call unit (House).

✽ Program button ⑦(P : Program)

Call program menu button.

(Press and hold over 5 sec, then menu will be activated)

 5 

Page 7

✽ Name searching button ⑥(S : Search)

www.safemag.ru

Tenants name searching button.

✽ Electric key button ⑫(K : Key)

Open door by Password Number. (Deactivate Password LOCK function only.)

✽ Cancel button ⑩(X : Cancel)

When user wants to cancel function, press it.

✽ Reset button ⑮

Reset security guard password or management office password. When forgot password, press reset button which is on back side of products 15

(Press & Hold over 3 sec. after power on)

 6 

Page 8

✽ Call security

www.safemag.ru

1. Press, name search button and call security which is top of the name list.

2. Press "9999" and press call button.

✽ Must know before use.

1) If you hear "beep beep beep..."during any program modes, please restart from the beginning. The beep sounds for improper process.

If password is forgotten,

2-1) Password for any household : Use the identifying household password function (6-1) to confirm the password (methods to confirm password shall be requested to the Management office or Security cPress). 2-2) Password for any building: Reset the password by using Management password 2-3) Password for Management Press "Reset Button".. The password will be reset to factory default.

3) Deleting All RF Card Keys function in "8-5" shall ONLY be used when the product is initially installed.

 7 

Page 9

4. Password type

www.safemag.ru

4-1. Password for the Management Office ("Management Password")

A password for the Manager Factory default for the Manager Password is 4321.

4-2. Password for any buildings ("Building Password")

A common password for a corresponding building. Factory default for the Building Password is 1234.

4-3. Password for any household units "Unit Password")

A password for each household unit can be set. Factory default for the Unit Password is 1234.

 8 

Page 10

5. How to input Password

www.safemag.ru

5-1. Press management Password

• P - old Password - E - New Password - E

• Password must be 4 digits.

• "0000", "1234", "4321" can't be used as Password

① Press program button (P). ② Press old management default Password (4,3,2,1). ③ Press call button (E). ④ Press "0" (Set up management Password button) ⑤ Press call button (E). ⑥ Press new Password. ⑦ Press call button (E). ⑧ Management Password has been changed.

<Caution> Please do not keep the factory default password. New password setting after the installation is strongly recommended.

 9 

Page 11

5-2. Press building Password

www.safemag.ru

• P - old Password - E - 1 - E - New Password - E

• Password must be 4 digits.

•"0000°", "1234", "4321" can't be used as Password

① Press program button (P). ② Press old building default Password (4,3,2,1). ③ Press call button (E). ④ Press "1" (Set up building Password button) ⑤ Press call button (E). ⑥ Press new Password. ⑦ Press call button (E). ⑧ Building Password has been changed.

 10 

Page 12

5-3. Press house (Unit) Password

www.safemag.ru

• K - 20 - E- house Number - E- old Password - E - New Password - E

• Password must be 4 digits.

•"0000", "1234", "4321" can't be used as Password

• Unit Password no. may not be changed because of Interphone types.

(Some model of Interphone can change Password in house. Please, check manual of interphone)

① Press program button (K) ② Press "20" (Set unit Password Number) ③ Press call button (E). ④ Press house Number ⑤ Press call button (E). ⑥ Press old house Password (4,3,2,1). ⑦ Press call button (E). ⑧ Press new house Password. ⑨ Press call button (E). ⑩ House Password has been changed.

 11 

Page 13

6. Check house Password

www.safemag.ru

6-1. Check house Password

• P - management Password - E - 16 - E - Household Unit Number E

① Press program button (P). ② Press management Password. ③ Press call button (E). ④ Press "16" (Set ID Number function key) ⑤ Press call button (E). ⑥ Press new ID Number ⑦ Press call button (E). ⑧ ID Number has been changed.

 12 

Page 14

7. Set building Number and ID to Lobby panel

www.safemag.ru

• This setting is mandatory because building Number and ID automatically are set up when

lobby panel call house and security guard.

• Max. 99 lobby panel can be installed for one building.

7-1. Set building Number in Lobby panel interphone.

• P - Management Password - E - 2 - E - Building Number - E

① Press program button (P). ② Press management Password. ③ Press call button (E). ④ Press "2" (Set building Number function key) ⑤ Press call button (E). ⑥ Press new building Number ⑦ Press call button (E). ⑧ Building Number has been changed.

 13 

Page 15

7-2. Set ID no. in Lobby Panel

www.safemag.ru

• P - Management Password - E - 3 - E - ID - E

① Press program button (P). ② Press management Password. ③ Press call button (E). ④ Press "3" (Set ID Number function key) ⑤ Press call button (E). ⑥ Press new ID Number ⑦ Press call button (E). ⑧ ID Number has been changed.

 14 

Page 16

8. RF card key appliances

www.safemag.ru

8-1 RF card key test way

• P- Management Password - E - 9 - E - Card Test - X(Cancel)

• This function is only for the test of wireless card key

① Press down the (P) button ② Press Management Passwords ③ Press Call Button "E". ④ Press number "9" for the test of wireless card key ⑤ Press Call Button "E" ⑥ The card registration number will be on OLED when the card key is close to the RF/ID

⑦ Press down the (X) button for finish after test.

receiver.

 15 

Page 17

8-2. RF card key input way

www.safemag.ru

• P- Management Password - E- 10 - E - Place card close to the RF/ID receiver - X(cancel)

<References> Up to 2048 cards can be registered(if not to connect with SecuMAX)

 16 

Page 18

8-3. RF card key separate deletion way

www.safemag.ru

• P - Management Password - E - 12 - E - Delete cards - X(Cancel)

① Press Program Button "P" ② Press Management Password ③ Press Call Button "E" ④ Press number "12"(separate delete number) ⑤ Press Call Button "E" ⑥ Place the card key close to the RF/ID receiver. ⑦ Press down the "X" to finish when separate deletion is completed

 17 

Page 19

8-4. RF card key registration check way

www.safemag.ru

• P- Management password - E - 13 - E - Check the cards - X(Cancel)

① Press Program Button "P" ② Press Management Password ③ Press Call Button "E" ④ Press number "13"(registration check) ⑤ Press Call Button "E" ⑥ Place the card key close to the RF/ID receiver ⑦ Press down X button to finish when check is completed

 18 

Page 20

8-5. RF card key all delete way

www.safemag.ru

• P - Management password - E - 11 - E - E

• All deletion way is only useful when initially set up, unless all registered cards are to be

deleted.

① Press down "P" button ② Press Management Password ③ Press down "E" button ④ Press number "11" (all delete number) ⑤ Press Call Button "E" ⑥ Press Call Button "E" one more ⑦ The number on OLED display to be changed ⑧ Press down X button if to cancel.

<References> All numbers can be deleted only if the mode "1" in the program number(23) is selected & executed the all delete process within 30 seconds.

 19 

Page 21

8-6. RF card key capacity change way

www.safemag.ru

• P- Management password - E - 19 - E - 0 - E : Up to 2048 RF Cards can be registered

• P- Management password - E - 19 - E - 1 - E : Unlimited RF Cards can be registered

① Press down "P" button ② Press Management Password ③ Press down "E" button ④ Press number "19" (capacity change number) ⑤ Press Call Button "E" ⑥ Select mode between numbers "0" and "1".

⑦ Press Call Button "E"

(0 : Up to 2048 RF Card Keys can be registered) (1 : Unlimited RF Card Keys can be registered)

 20 

Page 22

8-7. RF card key data transmission

www.safemag.ru

• P - Management Passwords - E - 32 - E - Press destination lobby phone number - E

① Press Program Button "P" ② Press Management password ③ Press Call Button "E" ④ Press number "32" for data transmission ⑤ Press Call Button "E" ⑥ Press number "destination lobby phone number" ⑦ Press Call Button "E"

• Data can be sent only if the mode "99" in the program number(23) is

selected & executed the process within 30 seconds.

• You cannot use any other function before it completes(It takes about 5

minutes). If you want to complete more quickly, use the download program.

 21 

Page 23

8-8. RF card key data reception

www.safemag.ru

• P- Management Passwords - E - 33 - E - Press source lobby phone number - E

① Press Program Button "P" ② Press Management password ③ Press Call Button "E" ④ Press number "33" for data reception ⑤ Press Call Button "E" ⑥ Press number "source lobby phone number" ⑦ Press Call Button "E"

• Data can be received only if the mode "99" in the program

number(23) is selected & executed the process within 30 seconds.

• You cannot use any other function before it completes(It takes about 5

minutes). If you want to complete more quickly, use the download program.

 22 

Page 24

9. Set to be forced opening the Main Entrance

www.safemag.ru

door by SecuMAX

• P - Management password - E - 22 - E - 0 - E : Forwarding to SecuMAX disabled

• P - Management password - E - 22 - E - 1 - E : Forwarding to SecuMAX enabled

• This function is to set the door release by internal sensor information forwarding to

SecuMAX.

① Press Program Button "P" ② Press Management Passwords ③ Press Call Button "E" for call ④ Press number "22" for forwarding to SecuMAX ⑤ Press Call Button "E" ⑥ Select the mode

⑦ Press Call Button "E"

(0 : Forwarding to SecuMAX disabled) (1 : Forwarding to SecuMAX enabled)

 23 

Page 25

10. Door opening hours setting

www.safemag.ru

• P - Management Passwords - E - 5 - E - Opening hours - E

• This function is to control the common entrance door opening hours

① Press Program Button "P" ② Press Management Passwords ③ Press Call Button "E" ④ Press number "5" for door opening hours setting ⑤ Press Call Button "E" ⑥ Select door opening hours(Opening hours is in the middle of 1~25 seconds) ⑦ Press down any number for setting of door opening hours between 0~25 seconds ⑧ Press Call Button "E"(Changed opening hours is input)

 24 

Page 26

11. Line-by-line call function Setting

www.safemag.ru

• P - Management password - E - 21 - E - 0 - E: available for entire house call

• P - Management password - E - 21 - E - Line number - E : call only specified line

ex) In case 1 line ~ 2 line, input "0102"

• This function is only for specified line call, not for entire house call

① Press Program Button "P" ② Press Management Passwords ③ Press Call Button "E" ④ Press number "21" for call line-by-line ⑤ Press Call Button "E" ⑥ Select the line for call

ex) If to call only from 1 line to 3 line, Press "0103"

⑦ Press Call Button "E"(Changed setting would be input)

 25 

Page 27

12. Automatic calling function of guard station

www.safemag.ru

configuration

• P - Management password - E - 27 - E - 0 - E : Automatic call mode

• P - Management password - E - 27 - E - 1 - E : Emergency call mode

• This function is to set the automatic calling to the security station when the failure of

Password occurs more than 3 times.

① Press Program Button "P" ② Press Management Passwords ③ Press Call Button "E" for call ④ Press number "27" ⑤ Press Call Button "E" ⑥ Select the mode

⑦ Press Call Button "E"

(0 : Automatic call mode) (1 : Emergency call mode)

 26 

Page 28

13. Call Tones selection

www.safemag.ru

• P - Management password - E - 7 - E - 0 - E : Melody sound

• P - Management password - E - 7 - E - 1 - E : Bell(Ringer sound)

• This function is to set the recall sound of house & guard station at the common entrance

① Press Program Button "P" ② Press Management Passwords ③ Press Call Button "E" for call ④ Press number "7" for selection of call tones ⑤ Press Call Button "E" for cal ⑥ Select the mode

(0 : Melody sound) (1 : Bell sound)

⑦ Press Call Button "E"(Changed call tones will be set)

 27 

Page 29

14. Setting the Number of Call Ring Repetitions

www.safemag.ru

• P - Management Password - E - 25 - E - 0 - E : Continuous call ring enabled.

• P - Management Password - E - 25 - E - 1 - E : 1 time Call ring enabled.

• This function sets number of call ring repetition when a call is made to any households

or security office.

① Press Program Button "P". ② Press Management Password. ③ Press Call Button "E". ④ Press "25" (number twenty-five) ⑤ Press Call Button "E". ⑥ Select the mode

(0 : Continuous call ring) (1 : 1 time call ring)

⑦ Press Call Button “E”

 28 

Page 30

15. Door release by external information

www.safemag.ru

forwarding to SecuMAX way

• P - Management password - E - 18 - E - 0 - E : Forwarding to SecuMAX disabled

• P - Management password - E - 18 - E - 1 - E : Forwarding to SecuMAX enabled

• This function is to set the door release by internal sensor information forwarding to

SecuMAX.

① Press Program Button "P" ② Press Management Passwords ③ Press Call Button "E" for call ④ Press number "18" for forwarding to SecuMAX ⑤ Press Call Button "E" ⑥ Select the mode

⑦ Press Call Button "E"

(0 : Forwarding to SecuMAX disabled) (1 : Forwarding to SecuMAX enabled)

 29 

Page 31

16. Set to be forced opening the Main Entrance

www.safemag.ru

door by SecuMAX

• P - Management password - E - 29 - E - 0 - E : Forced opening by SecuMAX disabled

• P - Management password - E - 29 - E - 1 - E : Forced opening by SecuMAX disabled

• This function is to set the opening the Main Entrance door forced opening by SecuMAX

① Press Program Button "P" ② Press Management Passwords ③ Press Call Button "E" for call ④ Press number "29" ⑤ Press Call Button "E" ⑥ Select the mode

⑦ Press Call Button "E"

(0 : Forced opening by SecuMAX disabled) (1 : Forced opening by SecuMAX enabled)

 30 

Page 32

17. Setting the time to trigger the notice to be

www.safemag.ru

forced door forwarding to SecuMAX

• P - Management password - E - 24 - E - 0 - E : This function is disabled

• P - Management password - E - 29 - E - 1 - E : Set the time(second)

• This function is to set the time to trigger the notice to be forced door forwarding to

SecuMAX

• If you use this function, you should set the time more 1 second than the door close time.

• The notice forwarding to SecuMAX after 2 seconds when to be forced opening

① Press Program Button "P" ② Press Management Passwords ③ Press Call Button "E" for call ④ Press number "24" ⑤ Press Call Button "E" ⑥ Select the mode

⑦ Press Call Button "E"

(0 : This function is disabled) (1 : Set the time(1~25 seconds)

 31 

Page 33

18. Selecting the Wiring Method

www.safemag.ru

• P - Management Password - E -6 - E - 4 - E : common 4 wire method

• P - Management Password - E - 6 - E - 6 - E : common 6 wire method

• If common 6 wire method selected, there will be no signal sent to all household units.

① Press Program Button "P". ② Press Management Password. ③ Press Call Button "E". ④ Press "6" (number six). ⑤ Press Call Button "E". ⑥ Select the wiring method by Pressing number

(4 : Common 4 Wire Method) (6 : Common 6 Wire Method)

⑦ Press Call Button "E".

 32 

Page 34

19. Registration of Household Unit Number

www.safemag.ru

• P - Management Password - E - 15 - E - Call Security from the monitor.- number of household - E - serial number - E

• This method applies to the case that there is no security station installed. Calling security from the monitor will direct the call to the lobby phone. Household Unit Number

can be set at the lobby phone.

 33 

Page 35

① Press Program Button "P".

www.safemag.ru

② Press Management password. ③ Press Call Button "E". ④ Press "15" (number fifteen). ⑤ Press Call Button "E". ⑥ From a household unit, call security. The factory default household unit number appears

on the OLED display of the lobby phone. Please Press the actual unit number.

⑦ Press the actual unit number and press Call Button "E". ⑧ Press "0" (0 is Master lobby phone number. If multiple lobby phones are installed,

please Press the corresponding lobby phone number) and press Call Button "E".

⑨ On the OLED display, the unit number input mode appears. ⑩ By repeating 6, 7, 8, 9 procedures, other unit numbers can be registered. ⑪ As unit number registration is done press Cancel Button "X" to exit.

• This method applies to the case that it is possible to install Slave-

phones.

• Master-videophone's "Multi Sub Number" is number 0 (zero).

• Sub-videophone's "Multi Sub Number" is given between 1 and 9.

• Up to 10 videophones can be installed in a single household unit and

the "Multi Sub Numbers" shall not be overlapped.

• "Multi Sub Numbers" for sub-videophones shall be registered in

numerical order.

• At least one Master-videophone with "Multi Sub Number 0" must be

installed and if only one videophone is installed, it is considered as Master-videophone (set as Multi Sub Number 0).

• In case that ADT-481 is installed, it does not register as Master unit.

• If sub-videophone is 485 system, its Master-videophone's Multi Sub

Number is 1 (one) and those of sub-videophones are between 2 and

 34 

Page 36

20. Checking Status of Household Units

www.safemag.ru

• P - Management password - E - 14 - Unit Number - E - serial number - E

• This function is to check the status of installed in each household unit.

 35 

Page 37

① Press Program Button "P".

www.safemag.ru

② Press Management Password. ③ Press Call Button "E". ④ Press "14" (number fourteen). ⑤ Press Call Button "E". ⑥ Press the Unit Number and press Call Button "E". ⑦ Press "0" (number zero as Master lobby phone or Press a corresponding lobby phone

number) and press Call Button "E". Status of the household unit appears (Please refer to below for the status).

⑧ To check another unit status, repeat 6 & 7 procedures. ⑨ As the status check is done press Cancel Button "X" to exit.

Status of household unit indication

• Standby : standby mode

(applies even when the household unit monitor is communicating with an individual door phone of the unit or via telephone line.)

• Busy Line : Busy mode

(applies when the household unit monitor is communicating with another household unit or security station.

• If there is a function to set away mode in household unit, you can

check below.

• Away status : Away mode

• Emergency : in case of emergency

(emergency, fire, gas leak, burglar)

 36 

Page 38

21. Setting the Keypad LED Option

www.safemag.ru

• P – Management Password – E – 20 – 0 – E : Keypad LED OFF

• P – Management Password – E – 20 – 1 – E : Keypad LED ON

• This function to set keypad LED ON/OFF.

① Press the program button (P). ② Please set up the Management password. ③ Press the call button (E). ④ Press number “20” (setting number of Electronic key) ⑤ Press the call button (E). ⑥ Select mode by numbers “0” or “1”.

(0 : White keypad LED light only work when you used lobby phone) (1 : White keypad LED light always on)

⑦ Press the call button (E).(It will be changed)

 37 

Page 39

22. Activation of Electronic Key (Password) Function

www.safemag.ru

• P - Management Password - E - 31 - 1 - E : Electronic Key (Password) enabled.

• P - Management Password - E - 31 - 0 - E : Electronic Key (Password) disabled.

• This function is to enable or disable the password access.

① Press Program Button "P". ② Press Management Password. ③ Press Call Button "E". ④ Press "31" (number thirty-one). ⑤ Press Call Button "E". ⑥ Select mode between numbers "0" and "1".

(1 : Password enabled) (0 : Password disabled)

⑦ Press Call Button "E".

 38 

Page 40

23. Setting the Volume of Voice and Beep Sound

www.safemag.ru

• P - Management Password - E - 30 - E - Beep Volume (1~2) - Voice Volume (1~7) - E

• This function enables the adjustment of Beep & Voice volume.

① Press Program Button "P". ② Press Management Password. ③ Press Call Button "E". ④ Press "30" (number thirty). ⑤ Press Call Button "E". ⑥ Press desirable Beep Volume (1~2) and then desirable Voice Volume (1~7). ⑦ Press Call Button "E".

• Beep sound volume applies to paging tone and button sound tone.

 39 

Page 41

24. Method of name data sending

www.safemag.ru

• P - Management Password - E - 34 - E - Press destination lobby phone number - E

① Press Program Button "P". ② Press Management Password. ③ Press Call Button "E". ④ Press number "34" (setting number of caller name) ⑤ Press Call Button "E". ⑥ Press number "destination lobby phone number" ⑦ Press Call Button "E".

• Data can be send only if the mode "99" in the program number(23) is

selected & executed the process within 30 seconds.

• You cannot use any other function before it completes(It takes about 5

minutes). If you want to complete more quickly, use the download program.

 40 

Page 42

25. How to receive the name of the data

www.safemag.ru

• P - Management Password - E - 35 - E - Press source lobby phone number - E

① Press Program Button "P". ② Press Management Password. ③ Press Call Button "E". ④ Press number "35" (setting number of name data) ⑤ Press Call Button "E". ⑥ Press number "source lobby phone number". ⑦ Press Call Button "E".

• Data can be received only if the mode "99" in the program number(23)

is selected & executed the process within 30 seconds.

• You cannot use any other function before it completes(It takes about 5

minutes). If you want to complete more quickly, use the download program.

 41 

Page 43

26. Setting the door release by building password

www.safemag.ru

26-1. Setting the Door Release by Building Password

• P – Management Password – E – 28 – 1 – E : Door release by Building Password enabled.

• P – Management Password – E – 28 – 0 – E : Door release by Building Password disabled.

• This function enables the door release by Building Password.

• This function provides least security to the access of the entrance since the password is

being shared among number of people. Please keep the security of Building Password strictly and/or change the Building Password periodically.

① Press Program Button “P”. ② Enter Management Password. ③ Press Call Button “E”. ④ Enter “28” (number twenty-eight). ⑤ Press Call Button “E”. ⑥ Select mode between the numbers “0” and “1”.

(1 : Door release by Building Password enabled) (0 : Door release by Building Password disabled)

⑦ Press Call Button “E”.

 42 

Page 44

26-2. Using a door release by Building Password function.

www.safemag.ru

 43 

Page 45

27. When you want to call a household

www.safemag.ru

1) called to a household

 44 

Page 46

28. When you want to call a Guard Station

www.safemag.ru

29. Door Release by Unit Password

 45 

Page 47

30. Supplement (summary of various programs)

www.safemag.ru

Setting Passwords

1. P–Previous Management Password–E–0–E– New Management Password–E :

Management Password Registration.

P-Previous Building Password-E-1-E-New Building Password-E : Building Password

Registration

3. K-20-E-Household Unit Number-E-Previous Unit Password-E-New Unit Password-E :

Unit Password Registration

4. P-Management Password-E-16-E-Unit Number-E : Retrieving Unit Password

Retrieving Unit Information

1. P-Management Password-E-14-E : Checking the unit’s interphone status

2. P-Management Password-E-15-E : Unit Number Registration

Building number, Lobby phone number, and Door release function Settings

1. P-Management Password-E-2-E-Building Number-E : Building Number Registration

P-Management Password-E-3-E-Lobby Phone Number-E : Lobby Phone Number

Registration

3. P-Management Password-E-28-E : Door Release Function enabled/disabled (00:

Disabled, 01: Enabled)

4. P-Management Password-E-31-E : Electronic Key (Password) enabled/disabled (00:

Disabled, 01: Enabled)

RF Card Key Programming

1. P-Management Password-E-9-E : RF Card Key Tesing

2. P-Management Password-E-10-E : RF Card Key Registration

3. P-Management Password-E-11-E : All RF Card Keys Initialization

4. P-Management Password-E-12-E : Deletion an individual RF Card Key

5. P-Management Password-E-13-E : RF Card Key Registration Confirmation

6. P-Management Password-E-32-E-Destination-E : RF Card Key Data Transmission

7. P-Management Password-E-33-E-Destination-E : RF Card Key Data Reception

Name Data Management

1. P-Management Password-E-34-E-Destination-E : Name Data Transmission

2. P-Management Password-E-35-E-Destination-E : Name Data Reception

 46 

Page 48

SecuMAX Management

www.safemag.ru

1. P-Management Password-E-18-E : Set to Door release by external information

forwarding to SecuMAX.

P-Management Password-E-22-E : Set to Door release by internal information

forwarding to SecuMAX.

3. P-Management Password-E-29-E : Set to be forced opening the Main Entrance door by

SecuMAX.

Door Release by Password

1. Unit Number-K-Unit Password-E : by Unit Password.

2. E-Building Password : by Building Password

How to make a unit call and guard station call from a lobby phone

1. Press house number-E : to Household

2. S-Name Search-E : to Household

3. Press Number ‘9999’-E : to Guard Station

4. Name search-Select Guard-E : to Guard Station

Other settings

1. P-Management Password -E-5-E : Door Release Duration Setting

2. P-Management Password -E-6-E : Selecting Wiring Methods (04: Common 4 wires, 06:

Common 6 wires)

3. P-Management Password -E-7-E : Selecting Call Rings (00:MELODY, 01:BELL)

4. P-Management Password -E-20-E : Setting the Keypad LED Option

(00 : Only work when you used lobby phone) (01 : Always On)

5. P-Management Password -E-21-E : Setting the Call by Unit Line

6. P–Management password–E–24–E : Setting the time to trigger the notice to be forced

door forwarding to SecuMAX

7. P-Management Password -E-25-E : Setting number of Call Rings

(00: continuous, 01: once)

P–Management password–E–27–E : Automatic calling function of guard station

configuration

9. P-Management Password -E-30-Beep Volume-Voice Volume-E : Setting the Volume of

Voice and Beep Sound

 47 

Page 49

31. Wiring Information

www.safemag.ru

1) Guard interphone

GateView GuardStation

481 GuardStation

 48 

Page 50

2) Sensor connection method

www.safemag.ru

 49 

Page 51

3) entrance interphone (DR-2AG)

www.safemag.ru

• If installed outdoor, it requires extra molding for water-proof and

rainshield.

 50 

Page 52

4) System schematic

www.safemag.ru

 51 

Page 53

32. Miscellaneous

www.safemag.ru

※ Please carefully read this User’s Guide before calling service man After checking the entire

check list, please contact customer service center. We will do our best to make you satisfy with our services.

33. Part list

Item Description Q’ty CONN. 2PX300 Wiring Connector 1 CONN.3P(3.96)X250 Wiring Connector 1 CONN.3PX300 Wiring Connector 2 CONN. 4PX300 Wiring Connector 1 CONN. 6PX300 Wiring Connector 2 POWER CORD WHI Adaptor Cord 1 SCREW. FHM 4X40 SUS NI

Bracket + Flush Mount Bracket

34. Specifications and Features

Installation Flush Mount Type installation Model DR-2AG/RF1

UTP Cable(ø 0.5) Wiring Power Source 12V , 1A

Power Consumption Standby : 135mA, Maximum : 320mA Call Method Handsfree(one way) Effective Call Range 100m RF Sensing Range 60mm Lighting Built-in LED light for night use Temperature -20°C(tested up to -40°C ) ~ 40°C Dimensions 130 (W) x 315 (H) x 40 (D) mm

Floor Distributor(common 6 wires),

Security station phone(common 4 wires)

 52 

Page 54

35. RF-ID Model (Optional)

www.safemag.ru

Communication Device Certification(RF Option)

Model Name DR-2AG/RF1 Frequency 13.56MHz Antenna power range Under 47.5mV/m within 10 meter radius Power 12V Emission Type A1D Number of Channel 1 Channel Modulation method ASK Communication method Simplex Operation Method Temperature -10°C(tested up to -40°C) ~ +50°C, 95%

 53 

Page 55

513-11, Sangdaewon-dong, Jungwon-gu, Seongnam-si, Gyeonggi-do, Korea Int’l Business Dept. Tel. : +82-31-7393-540~550 Fax. : +82-31-745-2133 Web site : www.commax.com

www.safemag.ru

PM132AGRF110

Printed In Korea / 2013.12.104

Commax DR-2AG/RF1 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual