Commax DR-2A3N User Manual

Page 1
Door Unit DR-2A3N
User Manual
Thank you for purchasing COMMAX products.
Please carefully read this User’s Guide (in particular, precautions for safety) before using a product and follow
instructions to use a product exactly.
The company is not responsible for any safety accidents caused by abnormal operation of the product.
Page 2
1
Overview
Page 3
2
1. Fix the hole of bracket with wall hole.
2. Connect Room station cables as appeared in the figure below.
3. Put the door unit inside of a back box as shown in the figure below.
4. Connect Door Release cable as appeared in the figure below.
5. Place the unit on the wall and mount with screws supplied.
Wiring and Installation
Page 4
3
DR-2A3N
ROOM STATION 1
ROOM STATION 2
ROOM STATION 3
1 2
1 2
1 2
1 2
3 4
Page 5
Manual DR-2A3N
BOLT/NUT/WRENCH 2.5#
BOLT/NUT/WRENCH 3X30
Model No. Rated voltage/Power consumption Wiring Installation Dimension Operating Temp.
DR-2A3N 9V (supplied from Room Unit) 3 Wired Flush mounted type 123 X 210 X 16(59)mm
-10°C ~ +50°C
4
Contents
Specification
Page 6
Printed In Korea / 2011.07.105
PM132A3N0010
513-11, Sangdaewon-dong, Jungwon-gu, Seongnam-si, Gyeonggi-do, Korea Int’l Business Dept. : Tel.; +82-31-7393-540~550 Fax.; +82-31-745-2133 Web site : www.commax.com
Loading...