Commax dpv-4be User Manual

• Thank you for purchasing COMMAX products.

• Please carefully read this User’s Guide (in particular, precautions for safety) before using a product and follow

instructions to use a product exactly.

• The company is not responsible for any safety accidents caused by abnormal operation of the product.

• Thank you for purchasing COMMAX products.

• Please carefully read this User’s Guide (in particular, precautions for safety) before using a product and follow

instructions to use a product exactly.

• The company is not responsible for any safety accidents caused by abnormal operation of the product.

User Manual

VIDEO DOOR PHONE DPV-4BE

1

Table of Contents

Warnings and caution

1. Parts Names & Functions

2. Operation

3. Installation Method

4. Wiring

5. Parts list

6. Specifications

1

Table of Contents

2

4

5

6

7

8

9

2

Warnings and caution

Please follow the things described below in order to prevent any dan­ger or property damage.

Warning

Caution

Prohibition.

No disassembly

No touch

Must follow strictly.

Shows plugging out the power cord
without an exception

Shows the warning and caution for an electric shock.

Shows the warning and caution for a fire.

It may cause a serious damage or
injury if violated.

It may cause a minor damage or
injury if violated.

Power & Installation

Warning

Please don’t use several
products at the same time on
one power socket.

·It may cause a fire due to an
abnormal overheating.

Please don’t bend the power
cable excessively or it may
cause an electric shock.

·fire when using a damaged
power cable.

Please don’t handle the power
cable with a wet hand.

·It may cause an electric
shock.

Please plug out the power
cable from the socket when
not using it for a long period
of time.

·It may shorten the product
lifespan or cause a fire.

Please don’t install the prod-
uct in the place where there is
much oil, smoke or humidity.

·It may cause an electric
shock or fire.

Please don’t install the prod-
uct with the lightening and
thunder.

·It may cause an electric
shock or fire.

Please don’t use and connect
this product with other prod

­ucts with different rated volt­age

·It may cause a disorder or

fire.

When installing the product
that generates heat, please
install the product away from
the wall (10cm) for the venti­lation.

·It may cause a fire due to
the increased internal tem

-

perature.

3

Warnings and caution

Cleaning & Use

Please don’t disassemble,
repair or rebuild this product
arbitrarily (please contact the
service center if a repair is
needed.

·It may cause an electric
shock or fire.

Please plug the power cable
firmly into the inner end

·It may cause a fire.

Please hold the plug tightly
when unplugging the power
cable (a part of the copper
wire may be disconnected if
the grabbing is only made on
the cord when pulling out the
cable).

·It may cause an electric
shock or fire

When connecting the power
cables after cutting the cable,
please install the product with
power off

·It may cause an electric
shock or fire

When installing the product,
please fix it firmly while using
the wall-mounting unit and
screws.

·It may cause an injury from
the falling object.

Please be careful when using
an AC circuit breaker since
there is a possibility of an
electric shock.

When cleaning the product,
please rub it with a soft and
dry cloth after plugging out
the power cable. (Please don’t
use any chemical products
such as wax, benzene, alcohol
or cleanser.)

Please don’t drop the product
on the ground and don’t apply
a shock .

·It may cause a failure.

Please use the designated con

­nection cable within the maxi­mum calling distance desig­nated for the product

·It may reduce the product

performance.

Please check the use voltage
and current for the DC-only
products and use the appropri

-

ate rectifier.

·It may cause a fire.

Please avoid direct rays of the
sun or heating devices at a
time of installation.

·It may cause a fire.

Please don’t install the prod

­uct on an unstable place or
small support board.

·It may cause an injury if it

falls down while in use.

If an abnormal sound, burning
smell or smoke is coming out
of the product, please plug out
the power cable and contact a
service center.

·It may cause an electric
shock or fire.

Please don’t insert any metal

­lic or burnable materials into
the ventilation hole.

·It may cause an electric

shock or fire.

Please use only the designated
batteries for the products of
using DC power.

·It may cause an electric
shock or fire.

Cleaning & UsePower & Installation

Warning

Caution

4

1.Parts Names & Functions

1 Handset

2 Hook Switch

3 Monitor Screen

4 Connection Terminal Connect the Camera and the Interphone

5 LED Power Status and the camera indication.

6 Monitor Button Press the button when the householder wants to see the front

door situation

7 Interphone Button Call the Interphone after picking up a handset.

8 Door Release Button When this button is pressed, while communication

between a monitor and a camera unit, the door is opened.

9 Volume control switch. Control the volume

10 Power On/Off Switch On/off power.

11 Brightness Control Switch Control the Brightness.

12 AC Powercode

13 Handset Connector Socket Connect Handset after installation

No. Name Description

1. Calling from a Camera unit.( In case of install a camera)

5

2. Operation

※ A view of the front door can be seen anytime the

entrance button is pressed and a dialog can be made
with anyone at the front door.

the visitor’s image appears on the monitor

hang-up the handset

dialog begins

󱎘 󱎘

to check

open the door

dialog duration is

up to 90 seconds at

a time

the door release function oper-

ates only when the visitor’s

image is displayed on the screen

a chime

sounds

a chime

sounds

The visitor
presses the

call button on

the camera1

The visitor
presses the

call button on

the camera2

▶

▶

▶

ends the call

▶

▶ ▶

▶

▶

▶

▶

press the butten

camera 1 view

The lamp is blink-

ing on green

color.

camera 2 view

The lamp is blink-

ing on orange

color.

Press twice

Press once

6

3. Installation Method.

Monitor

2. Communication with the optional Interphone

a three-way conversation can take

place if the monitor or interphone is

picked up simultaneously

▶

hang-up the

handset

▶

end the dialog

a ‘beep’ will be

heard

▶▶

A visitor
calls from
the entrance

a chime rings simulta­neously from both the

monitor and inter-

phone

▶ ▶

open the door

Call from
the monitor

▶

Call to the

monitor

▶▶

dialog begins

dialog begins

dialog begins

7

* Note:

- Do not install near magnetic activity, humid temperatures, extreme heating conditions,

under direct sunlight as these may damage the condition and performance of the prod

ucts.

- The position of the unit’s body should fit the standard height from the range which is

recommended to be from 1450㎜ ~ 1500㎜.

* Wires descriptions of camera.

1. Red: Voice 2. Blue: GND 3. Yellow: Power(+12V) 4. White: Video

4. Wiring

* Note:

- Do not install the camera where it is exposed to direct sunlight.

- Keep cleaning up its lens to capture good views.

Installation method of a camera unit.

- DPV-4BE

DPV-4BE

8

5. Parts list

* Wiring precautions

1. If high voltage cables are present in the vicinity, use a coaxial cable with metal outer

casing.

2. If any internal wires is exposed through mis-wiring, it may cause a short and become

a cause of malfunction or fire.

3. When connecting the monitor and camera, make sure that the monitor power is off.

(turn on the power after plugging the AC power cord into the outlet)

Monitor(main unit)

Mounting bracket User’s guide

Handset

Mounting

screw

4 pin

connector

screw

(for monitor)

6. Specifications

Rating Voltage AC 100 - 240V, 50/ 60Hz

Consumption operation : 14W

Wiring method To a Camera unit : 4 wires polarity, To an Interphone : 4 wires polarity

Monitor 10.16Cm CRT

Communication method Full duplex (Handset)

Call tone Call sound from camera: electronic chime, Interphone : electronic buzzer

Monitor Display 90 ±20sec

Distance from Camera 28m(Ø 0.5)/ 50m(Ø 0.65)/ 70m(Ø 0.8)
Working Temperature 0 ~ +40℃ (32°F ~ 104°F)

Weight 1.2Kg
Dimension(mm) 189(W) × 208(H) × 69.0(D)

Model DPV-4BE

9

513-11, Sangdaewon-dong, Jungwon-gu, Seongnam-si, Gyeonggi-do, Korea
Int’l Business Dept. Tel. : [phone]~550 Fax. : [phone]
Web site : www.commax.com

Printed In Korea / 2011.03.104