Floor distributor CMD-104VU
User Manual
• Thank you for purchasing COMMAX products.
• Please carefully read this User’s Guide (in particular, precautions for safety) before using a product and follow
instructions to use a product exactly.
• The company is not responsible for any safety accidents caused by abnormal operation of the product.
Only CAU-D047TP and CAD-I4V7TP (Commax CCTV Camera) are connectable with this model.
1
1. Introduction .......................................................................2
2. Important Safeguard .........................................................3
3. Product concept and function............................................4
4. Wiring diagram .................................................................5
5. ID Setting .........................................................................5
6. Specification...................................................................10
Contents
2
Your unit is designed so it can be flush mounted on the or used. When flush mounted on the wall, the stand permils you to the
unit for an gular of unit view. The model number is located on the bottom and record the serial number in the space provided
below(available). Refer to these numbers whenever you call upon your COMMAX dealer regarding this product.
Model No. Serial No.
To prevent fire or shock hazard, do not expose the unit to rain or moisture.
This symbol is intended to alert the use to the presence of uninsulated
“
“
dangerous Voltage
”
”
within the product’s enclose that
may be of sufficient magnitude to constitute a risk of electric shock to persons.
This symbol is intended to alert the use to the presence of important operating and maintemance(servicing) instructions in the
literature accompanying the appliance
1. Introduction
CAUTION : To reduce the risk of electric shock, do not remove cover(or back) no user-serviceable
part inside refer servicing to qualified service personnel
caution
Risk of electric shock
do not open
3
▲
Damage Requiring Service : This equipment from the power source and source and refer servicing to qualified service per-
sonnel under the following conditions
ⓐ when the power is damaged.
ⓑ if liquid has been spoiled or objects have hallen into the unit
ⓒ if the equipment has been exposed to rain or water.
ⓓ if the equipment has been dropped or otherwise damaged.
ⓔ when the equipment exhibits a distinct change in performance- this indicates a need for service.
▲
Water and Moisture : Do not use this product near water, for example, near a bath tub, wash bowl, kitchen sink, or laundry
tub, in a wet basement, or near a swimming pool, and the like.
▲
Accessories : The product may fall, causing serious injury to a child or adult, and serious damage to the appliance. Any
mounting of the manufacture
’s instructions, and should use a mounting accessory recommended by the manu-
facturer.
▲
Object and Liquid Entry : Never push objects of any kind into this product through openings as they may touch dangerous
voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any
kind on the product.
▲
Lightning : For added protection for this product before a lightning storm, or when it is left unattached and un used for long
periods of time, unplug it from the wall outlet and disconnect the other system. This will prevent damage to the
product due to lightning and power-line surges. If you live in an ared heavily prone to lightning storms, it is recommended that you invest in power-line, telephone-line, RF cable and actuator / polarization surge protectors to protect your appliance system from possible damage
2. Important Safeguards
4
3. Product concept and function
(1) CMD-104VU is interfaced with CCTV. It is designed for MODUM system device which
can select video and transferred to each house videophone.
(2) Pre caution for CMD-104VU wiring (We do not guarantee product quality which user
can't follow bellow conditions.)
- Connect CMD-104VU "OUT" to Building Distributor or, CMD-104VU "IN".
- Connect CMD-104VU "LINE1~4" to CCTV. (One CMD-104VU connect to Max.
CCTV 4)
- CMD-104VU can be installed to Max. 2 (two) (Total CCTV 8).
- Must reboot CMD-104VU after setting DIP SWITCH (8PIN).
- CMD-104VU can be expanded Max. 2 (two). Each device use DC 14V/4A power.
- Distance between CMD-104VU and CCTV should be within 50M.
- CMD-104VU is for MODUM system CCTV selector only. If it is interfaced with other
system, it may not be operated properly.
Connectable CCTV : CAD-I4V7TP (Commax CCTV Dome Camera)
CAU-D047TP (Commax CCTV Bullet Camera)
(Please, check compatibility before interfacing with other products or system.)
Loading...