• Thank you for purchasing COMMAX products.
• Please carefully read this User’s Guide (in particular, precautions for safety) before using a product and follow
instructions to use a product exactly.
• The company is not responsible for any safety accidents caused by abnormal operation of the product.
User Manual
www.bezpeka-shop.com
Color video door phone CDV-70P
• Thank you for purchasing COMMAX products.
• Please carefully read this User’s Guide (in particular, precautions for safety) before using a product and follow
instructions to use a product exactly.
• The company is not responsible for any safety accidents caused by abnormal operation of the product.
Greetings
www.bezpeka-shop.com
● Thank you for choosing COMMAX.
● Please read this manual carefully before you use the product.
Table of contents
Greetings ..................................................................................................................1
Contents table...........................................................................................................1
1. Warnings and caution ...........................................................................................2
2. Product Overview..................................................................................................4
3. Operation Methods ...............................................................................................5
4. Settings.................................................................................................................6
5. Installation.............................................................................................................8
6. Wiring ...................................................................................................................9
7. Part lists ..............................................................................................................11
8. Caution in use ....................................................................................................12
9. Miscellaneous .....................................................................................................12
10. Specification......................................................................................................12
1
1. Warnings and caution
www.bezpeka-shop.com
Please follow the things described below in order to prevent any
danger or property damage.
Prohibition.
Warning
It may cause a serious damage or injury if
violated.
No disassembly
No touch
Caution
It may cause a minor damage or injury if violated.
Please don’t use several
products at the same time on
one power socket.
·It may cause a fire due to an
abn
ormal overheating.
Please don’t install the
product in the place where
there is much oil, smoke or
humidity.
·It may cause an electric
shock or fire.
Power & Installation
Warning
Please don’t bend the power
cable excessively or it may
cause an electric shock.
·fire when using a damaged
power cable.
Please don’t install the
product with the lightening
and thunder.
·It may cause an electric
shock or fire.
Must follow strictly.
Shows plugging out the power cord
without an exception
Shows the warning and caution for an electric shock.
Shows the warning and caution for a fire.
Please don’t handle the power
cable with a wet hand.
·It may cause an electric
shock.
Please don’t use and connect
this product with other
products with different rated
voltage
·It may cause a disorder or
fire.
Please plug out the power
cable from the socket when
not using it for a long period
of time.
·It may shorten the product
lifespan or cause a fire.
When installing the product
that generates heat, please
install the product away from
the wall (10cm) for the
ventilation.
·It may cause a fire due to
the increased internal
temperature.
2
Warning
www.bezpeka-shop.com
Please don’t disassemble,
repair or rebuild this product
arbitrarily (please contact the
service center if a repair is
needed.
·It may cause an electric
shock or fire.
Cleaning & UsePower & Installation
Please plug the power cable
firmly into the inner end
·It may cause a fire.
Please be careful when using
an AC circuit breaker since
there is a possibility of an
electric shock.
If an abnormal sound, burning
smell or smoke is coming out
of the product, please plug out
the power cable and contact a
service center.
·It may cause an electric
shock or fire.
Caution
Please hold the plug tightly
when unplugging the power
cable (a part of the copper
wire may be disconnected if
the grabbing is only made on
the cord when pulling out the
cable).
·It may cause an electric
shock or fire
Please check the use voltage
and current for the DC-only
products and use the
appropriate rectifier.
·It may cause a fire.
Please don’t insert any
metallic or burnable materials
into the ventilation hole.
·It may cause an electric
shock or fire.
When connecting the power
cables after cutting the cable,
please install the product with
power off
·It may cause an electric
shock or fire
Please avoid direct rays of the
sun or heating devices at a
time of installation.
·It may cause a fire.
Please use only the designated
batteries for the products of
using DC power.
·It may cause an electric
shock or fire.
When installing the product,
please fix it firmly while using
the wall-mounting unit and
screws.
·It may cause an injury from
the falling object.
Please don’t install the
product on an unstable place
or small support board.
·It may cause an injury if it
falls down while in use.
When cleaning the product,
please rub it with a soft and
dry cloth after plugging out
the power cable. (Please don’t
use any chemical products
such as wax, benzene, alcohol
or cleanser.)
Please don’t drop the product
on the ground and don’t apply
a shock .
·It may cause a failure.
Please use the designated
connection cable within the
maximum calling distance
designated for the product
·It may reduce the product
performance.
Cleaning & Use
3
2. Product Overview
www.bezpeka-shop.com
No. DescriptionNo.
1 Monitor 10 Call Sound Level Control
2 Microphone 11 Menu Button
3 Speaker 12 Select Button
4 On/Off & status LED 13 Up Button (△)
5 Monitor Button 14 Down Button (▽)
6 Interphone Button 15 Power Switch
7 Door Release Button 16 Connector Terminal
8 Talk Button
9 Talk Sound Level Control
1. Monitor : You can check the visitor.
2. Microphone : You can talk with the visitor.
3. Speaker : You can hear the calling sound from the door camera.
4. On/Off & status LED :
Show blue light when the monitor is turned on, no light when off.
5. Monitor Button : Press to see images from camera.
6. interphone Button : Press to call interphone.
7. Door Release Button : Press to open the door.
8. Talk Button : Press to talk with door camera.
9. Talk Sound Level Control : Use to adjust sound level during talking.
10. Call Sound Level Control : Use to adjust sound level of calling sound.
11. MENU Button :
Press to enter Menu for display adjustment, calling sound setting, product
information etc.
12. Select Button : Press to select on menu.
13. Up Button : Press to move up on menu.
14. Down Button : Press to move down on menu.
15. Power Switch : Used to turn on/off power of the product.
16. Connector Terminal :
Used to connect other devices like door camera, door panel, or program update
4
tool.
Description
3. Operation Methods
www.bezpeka-shop.com
3-1. Receiving a calling from visitor.
① When the call button is pressed by a visitor on the door camera, the melody shall be
rung and visitors' image is shown on the screen
(If you do not press the Talk Button, the display will be shown up for 30 seconds and
turned off automatically).
② By pressing the Talk Button, you are able to talk with visitor. By pressing the Door
Release Button, you can open the door for visitor(Door release function can be done
only when the monitor is showing the visitor, on the camera which has door release
function.)
③ When monitor and door camera are on talking, the 3-party talking is possible by
picking up receiver of the interphone. (Camera-Monitor-Interphone talking at same
time.)
④ By pressing Talk Button again you can end the talking and monitor comes back to
stand-by mode.
3-2. Talk with Interphone.
(1) Calling from the Interphone.
① You will hear calling sound when interphone call the monitor.
② Press Talk Button to talk with the interphone.
③ When monitor and interphone are on talking, the 3-party talking is possible by calling
from the door camera. (Camera-Monitor-Interphone talking at same time.)
(2) Calling the interphone from the monitor.
① Press Talk Button and Interphone Button in order to call the interphone from the
monitor. (Interphone button should be pressed & held until the interphone answers.)
② Then talking is available by picking up the handset of interphone.
3-3. Monitoring : To see the visitor at the door.
(On stand-by mode) Operation
- By pressing the Monitor button repeatedly, the monitor will work as following in order.
Camera 1 Camera 2 OFF Camera 1 ......
(On talking mode) Operation
- By pressing the Monitor button repeatedly, the monitor will work as following in order.
Camera 1 Camera 2 Camera 1 Camera 2 ......
Caution :
When you use only 1 camera, please connect the short pin(jumper), which is included
in product packing, to the terminal “
(When the short pin is connected, the camera 2 does not work.)
Camera 2 Select” on the back side of the product.
5
4. Settings
www.bezpeka-shop.com
On talking or monitoring mode, press menu button on the right side of product, and
press △/▽ buttons to adjust display(brightness, contrast, color), to enter the Utility
menu, to check the product information.
•Following 4 buttons on the right side of the product are used for setting.
* Menu, End : MENU
* Select, Input : SELECT * Move down, left : ▽
4-1. Display Setting (Brightness, Contrast, Color Adjustment)
On Setting Mode, move to Door Video Set and press Select button to enter the display
setting mode.
(1) BRIGHTNESS : To adjust brightness.
(2) CONTRAST : To adjust contrast.
(3) COLOR : To adjust color.
※ How to adjust
① On DOOR VIDEO SET display press △/▽ to move to the item you want to adjust
② Press Select Button to select the item.
③ Adjust using △/▽ buttons.
④ Press Select Button again to finish.
(4) RESET : Puts back settings to initial setting.
※ How to reset.
① On DOOR VIDEO SET display move to RESET item.
② Press SELECT Button to select the item.
③ Select YES using △/▽ buttons.
④ Press SELECT button to reset.
(5) EXIT : Return to Configuration mode
※ Setting
① Click △/▽ button to move to EXIT in DOOR VIDEO SET menu
② Click SELECT button
* Move up, right : △
(UP Button)
(DOWN Button)
4-2. UTILITY(Extra features)
Move to UTILITY and click SELECT button to enter below menu
(1) CHIME-BELL MUTE : Set call sound mute function
① Move to UTILITY from configuration mode and click SELECT. Then, move to
CHIME-BELL MUTE using △ /▽ button
6
② Click SELECT button
www.bezpeka-shop.com
③ Control the volume with △/▽ button
: Bell on / : Bell off
④ After the setting, click SELECT button
(2) EXIT : Return to configuration mode
※ Setting
① Move to EXIT in UTILITY MODE by using △ /▽ button
② Click SELECT button to choose
4-3. INFORMATION (Model and Version checking)
Click △/▽ button to check the Model and version in configuration mode
(1) Model : The name of Model
(2) Version : The version of the product
(3) VIDEO : The video type of the product
(4) SOURCE : The location of the image
4-4. EXIT(End configuration)
Move to EXIT and click Select button.
7
5. Installation
www.bezpeka-shop.com
1. Installation Method of camera monitor
2. Installation Method of camera
SCREW T4X18(2EA)
Note
① Avoid the range of direct sunlight
② Recommended height is pertinent
from 1450 ~ 1500mm
③ Avoid the installation near magnetic
activity, humid temperatures and gas
Note
① Do not install the camera where
it is exposed to Direct sunlight
② Keep cleaning up its lens to
capture good views.
SCREW M3X8(1EA)
8
DRC-40CK
6. Wiring
www.bezpeka-shop.com
CAMERA CONNECTOR POLARITY
1. RED : VOICE 2. BLUE : GND 3. YELLOW : POWER(+12V) 4. WHITE : VIDEO
CAMERA2 SELECT : Decide if you use Camera No.2 or not
(Please insert the enclosed short pin, if you do not want to use Camera No.2)
Caution on the Wiring
Be sure to use a separate wiring for each connect
2lines of UTP CABLE[CAT.5] are required if UTP CABLE[CAT.5] is used for
CAMERA1 and CAMERA2
9
DOOR Camera Wiring
www.bezpeka-shop.com
• If UTP CABLE[CAT.5] is used, use 5 lines for GND line.
INTERPHONE Wiring
• If UTP CABLE[CAT.5] is used, use 5 lines for GND line.
10
7. Part list
www.bezpeka-shop.com
① Body of CDV-70P
④ GH1T 4 X 18 ZnY
Screw for wall mount
⑦ 2P SHUNT
Only No. 1 camera is available
if you insert 2P shunt(short pin)
① Monitor(CDV-70P)
② Wall bracket
③ Manual
④ Mounting Screw (SCREW GH1T 4X18 ZnY) – 4EA
⑤ Monitor fixing screw (SCREW PHM 3X6 ZnY) – 1EA
⑥ Connector (CONN. 4PX300) – 2EA
⑦ Camera 2 Short pin (PIN 2P SHUNT(A2095)) – 1EA
② Bracket for wall mount
⑤ PHM 3 X 6 ZnY
Screw for body
③ Manual
⑥ 4P(2EA)
Connector
11
8. Caution in use
www.bezpeka-shop.com
1. Turn on the power switch.
2. Please contact your local agent for product maintenance when you have a
problem in use of CDV-70P
3. For your safety, power switch with a safety device must be used in your building.
4. Unplug before installing or repairing the product.
5. Unplug when you connect monitor with door cameras.
9. Miscellaneous
Please carefully read this User's Guide before calling service man
●
After checking the entire check list, please contact customer service center.
We will do our best to make you satisfy with our services.
10. Specification
MODEL
Transmission way Door camera 4wires (Polarity), interphone 4wires (polarity)
Rating Voltage 100V-240V~, 50/60Hz (FREE VOLTAGE)
Power consumption On stand-by : 3.5W On talk: 15W
Transmission way HANDS FREE (Voice switch circuit)
Monitor 7" TFT-DIGITAL LCD
Call sound Door : Electronic chime (Sol Mi Do), interphone : Beep
Display Monitoring : 30 ±5sec , Talk : 60 ±5sec
Distance
Working temperature 0 ~+40℃ (32℉ ~ 104℉)
Dimension 243.0(W) X 168.0(H) X 30.0(D)
Pie 0.5mm 0.65mm 0.8mm
28m 50m 70m
CDV-70P
12
513-11, Sangdaewon-dong, Jungwon-gu, Seongnam-si, Gyeonggi-do, Korea
Int’l Business Dept. Tel. : +82-31-7393-540~550 Fax. : +82-31-745-2133
Web site : www.commax.com
www.bezpeka-shop.com
PM0770P00010
Printed In Korea / 2011.10.104
Loading...