• Thank you for purchasing COMMAX products.
• Please carefully read this User’s Guide (in particular, precautions for safety) before using a product and follow
instructions to use a product exactly.
• The company is not responsible for any safety accidents caused by abnormal operation of the product.
• Thank you for purchasing COMMAX products.
• Please carefully read this User’s Guide (in particular, precautions for safety) before using a product and follow
instructions to use a product exactly.
• The company is not responsible for any safety accidents caused by abnormal operation of the product.
Color video door phone CDV-70KM
User Manual
1
● Thank you for choosing COMMAX.
● Please read this manual carefully before you use the product.
Greetings ..................................................................................................................1
Table of contents .....................................................................................................1
1. Warnings and caution ...........................................................................................2
2. Product Overview..................................................................................................4
3. How to use ............................................................................................................5
4. GUI Function.......................................................................................................11
5. Wiring methods ..................................................................................................27
6. Components .......................................................................................................28
7. Caution in use ....................................................................................................29
8. Miscellaneous .....................................................................................................29
9. Specification........................................................................................................29
Greetings
Table of contents
2
Please follow the things described below in order to prevent any
danger or property damage.
Warning
Caution
P
rohibition.
No disassembly
N
o touch
Must follow strictly.
S
hows plugging out the power cord
without an exception
Shows the warning and caution for an electric shock.
Shows the warning and caution for a fire.
It may cause a minor damage or injury if violated.
It may cause a serious damage or injury if
v
iolated.
Power & Installation
Warning
Please don’t use several
products at the same time on
one power socket.
·
It may
cause a fire due to an
abnormal overheating.
Please don’
t bend the power
cable excessively or it may
cause an electric shock.
·
fire when using a damaged
power cable.
Please don’
t handle the power
cable with a wet hand.
·
It may cause an electric
shock.
Please plug out the power
cable from the socket when
not using it for a long period
of time.
·
It may shorten the product
lifespan or cause a fire.
Please don’
t install the
product in the place where
there is much oil, smoke or
humidity.
·
It may cause an electric
shock or fire.
Please don’t install the
product with the lightening
and thunder.
·
It may cause an electric
shock or fire.
Please don’
t use and connect
this product with other
products with different rated
voltage
·
It may cause a disorder or
fire.
When installing the product
that generates heat, please
install the product away from
the wall (10cm) for the
ventilation.
·
It may cause a fire due to
the increased internal
temperature.
1. Warnings and caution
3
Cleaning & Use
P
lease don’tdisassemble,
repair or rebuild this product
arbitrarily (please contact the
service center if a repair is
n
eeded.
·
I
t may cause an electric
s
hock or fire.
Please plug the power cable
firmly into the inner end
·
It may cause a fire.
Please hold the plug tightly
when unplugging the power
cable (a part of the copper
wire may be disconnected if
the grabbing is only made on
the cord when pulling out the
cable).
·
It may cause an electric
shock or fire
When connecting the power
cables after cutting the cable,
please install the product with
power off
·
It may cause an electric
shock or fire
When installing the product,
please fix it firmly while using
the wall-mounting unit and
screws.
·It may cause an injury from
the falling object.
Please be careful when using
an AC circuit breaker since
there is a possibility of an
electric shock.
When cleaning the product,
please rub it with a soft and
dry cloth after plugging out
the power cable. (Please don’
t
use any chemical products
such as wax, benzene, alcohol
or cleanser.)
Please don’
t drop the product
on the ground and don’
t apply
a shock .
·
It may cause a failure.
Please use the designated
connection cable within the
maximum calling distance
designated for the product
·
It may reduce the product
performance.
Please check the use voltage
and current for the DC-only
products and use the
appropriate rectifier.
·It may cause a fire.
Please avoid direct rays of the
sun or heating devices at a
time of installation.
·
It may cause a fire.
Please don’
t install the
product on an unstable place
or small support board.
·
It may cause an injury if it
falls down while in use.
I
f an abnormal sound, burning
s
mell or smoke is coming out
o
f the product, please plug out
the power cable and contact a
service center.
·
It may cause an electric
shock or fire.
P
lease don’
t
insert any
metallic or burnable materials
into the ventilation hole.
·
It may cause an electric
s
hock or fire.
Please use only the designated
b
atteries for the products of
u
sing DC power.
·
I
t may cause an electric
shock or fire.
Cleaning & UsePower & Installation
Warning
Caution
4
• SHORT PIN is not used when Camera1 and Camera 2 are connected. Once the
power is on, the product automatically detects whether the Camera 2 is connected
or not.
•
Therefore, please make sure that you connect CAMERA2 before the power is
turned on, so that product can detect CAMERA2 connection.
(CAMERA2 is connected after the power is turned on, the videophone would not
sense its connection, But it would sense the CAMERA2 after the CAMERA 2 calls
the videophone.)
DescriptionNo. DescriptionNo.
2. Product Overview
1 HANDSET 7 DOOR RELEASE BUTTON
2 LCD MONITOR 8 MENU BUTTON
3 MONITOR BUTTON 9 SD CARD SLOT
4 INTERPHONE BUTTON
5 VOLUME CONTROL
6 IMAGE SAVE BUTTON
10
EXTERNAL CONNECTION
TERMINAL
5
Stand-by mode
When you turn on the product, the LCD(Blue) on the upper right hand corner will be
turned on.
And then you can see a LOGO on the LCD screen, after booting sound, it will be
stand-by mode.
Operation
(1-1) To make a call
①
When the visitor press button in stand-by mode from the entrance(door camera),
electronic chime bell rings of video phone and interphone. And LEDs of
(Monitoring Button) and the image of the visitor is shown on the screen in 3
seconds.
②
The screen will be turned on for 30 seconds and you can talk to the entrance unit
when you pick up the handset. For communication, it will be turned on for 60
seconds.
③
The screen will be turned on for 30 seconds and for communication, it will be turned
on for 60 seconds.
④
Icon will be popped up when the handset is picked up. If you press (Call)to
call the interphone, interphone image will be shown on the screen and the beep
sound will come out. If the handset of interphone is picked up, the conversation
begins Put down the handset to end the conversation.
⑤
To call the videophone from the interphone, pick up the handset of interphone and
press call button. Then, the videophone will ring and the interphone image will be
shown on the screen.
(1-2) Call Function
If you would like to refuse the call from the entrance, press MENU button on the right
sides of the product. Then, the call will end and return back to standby mode.
(2) VOLUME CONTROL (LOW
MEDIUM HIGH MUTE)
Press button to adjust the volume in standby mode
When you press 7 button, the volume will be changed to
(30
60 100 MUTE).
3. How to use
6
● Initialization method and changing list
Initialization of settings(user initialization)
(All video files will be deleted after the initialization, therefore please make sure that
you back up the saved video files before the initialization)
- Color balance (BRIGHT 50/CONTRAST 50/COLOR 50)
- Language(English)
- Auto-save function (Auto-save)
- Image save mode (Still image)
- Deleted saved images of SD CARD.
● How to insert an SD card
[CAUTION]
If the initialization is in progress, remove the SD card, or Do not turn OFF the power.
SD card may cause a malfunction.
(3) Call Function
①
If you press (monitor button) in stand-by mode, LEDs blinks.
You can talk with door camera, if you pick up the handset
②
You can talk for 60 seconds with door camera. When the time is over, it will be
stand-by mode automatically.
③
You can talk with CAMERA2 by calling CAMERA2 during communicating with
CAMERA1, the screen will be sequentially shown from CMAERA1 to CAMERA2
when user press (monitoring button)
④
When the visitor calls from the entrance(door camera) during communicating
between video phone and interphone, the view from the camera will be displayed on
7
the screen and , 3-way communication begins..
※
Communication ends when the handsets are hung up.
(4) Save image
①
To save camera images, press (save image button) more than 1second during
calling camera or monitoring mode.
②
You can save still image shown on the screen when you press the button.
③
While it is saving the video clip, save image buttons will not work. The button will
work after image saving is complete.
④
This function operates regardless of setting for recording method(Auto/manual)
⑤
You can use same function by pressing for long when you call camera or
monitoring.
⑥
Images are stored in SD CARD only. If you don't put in SD CARD or use defected
SD CARD, saving images is not available.
(5) Monitoring
(The following scenario is the example that 2 cameras and 2 CCTV are installed. If
they are not installed as like the example, the monitoring function of relevant camera
doesn't work.)
- Monitoring sequence (The monitoring mode will be sequentially operated when
user presses button as follows)
(Standby mode)
- It will be sequentially operated when user presses monitoring button as
follows.(Without CCTV connection)
- CAMERA1
CAMERA 2 OFF CAMERA 1 ............
- It will be sequentially operated when user presses monitoring button as follows.
(With CCTV connection)
- CAMERA 1
CCTV 1 CAMERA 2 CCTV2 OFF
CAMERA 1 ............
(During Communication)
No CCTV switch. - CCTV does not have communication function.
- It will be sequentially operated when user presses monitoring button as follows.
(CAMERA1
CAMERA 2 CAMERA 1 CAMERA ............ )
8
(6) Door release
- If you press (door release button) on the monitor during the talk, the door
opens with release sound.
(7) Save captured image
※
This function applies when the storage method is "Picture"
If you set auto-save mode, it store image when there is call from camera.
If you press (save image button) or (Monitoring) for 1second in
monitoring mode or communicating mode, record icon will be displayed on the
screen and 1image cut will be saved.
(8) Save of video
※
This function applies when the recording method is "video".
It record image when there is a call from camera in auto-recording mode.
If you set auto-save mode, it record video for 30 seconds when there is call from
camera, and for 60 seconds in case of communicating.
The maximum time able to record video for one time is 90 seconds(reply time for call
+ time for talk)
[caution1]
Don’t remove SD card during saving of captured image and video. It may cause defect
or data loss.
[caution2]
The recording image file is only stored in SD CARD. Please note that It is not available
to record image If SD CARD was defective or not put into product.
When the icon is displayed, please back up the files saved in the Micro SD Card.
9
SAVE FILE and FILE FORMAT
image 000001C1.jpg
000002C2.jpg
000001C1.asf
000002C2.asf
Still
Video
Details Of file
Note
It is necessary to keep minimum extra space of Micro SD Card
Min. Extra Space: Micro SD - 5%
ex) In case of 16GB, it requires 800MB
Save 128 cuts(MAX) of Captured images
If the memory exceed capacity, the oldest file will be deleted and
then save new file.
Video can be saved in full..
If not have any space for storage in Micro SD Card
This icon will be displayed in LCD screen.
If the icon above comes up, the oldest file will be deleted
automatically to save new one.
At this time, it might erase several files to make minimum extra
space.
So, please make a backup of your important files and save
separately.
The icon “SD FULL” will be disappeared if there is enough space
by format internal memory and Micro SD Card, delete files.
The number of files is depends on memory.
Please refer to following information.
If the number of files exceed maximum number available to save,
the oldest file will be deleted and save new one. Even though you
have extra space.
It is possible to delete all of files or each one.
File No
000001
000002
C1 : CAM 1
C2 : CAM 2
Imagesmages (*.jpg)
Video
(*.asf)
Video Type File Type
Loading...