comfortel.com.au
#8300 TUSCANY SALON WORKSTATION/MIRROR
tuscany
workstation
owners manual
GET STARTED
All measurements are in mm.
830
600 1400
210
100
2000
TUSCANY
Steel Salon Workstation
Width: 830mm Height: 2000mm Depth: 100mm
Weight: 36Kg
Material: Matte Black Steel frame and bench
STEEL FRAME
MIRROR
BENCH
ASSEMBLY : BENCH
STANDARD : SINGLE BENCH
(METAL OR OPTIONAL SINGLE WOOD BENCH)
1 Metal Frame with Mirror
2 Metal Bench Top - Single
3 Screws x 6
ASSEMBLY
1. Position Bench top into frame so screw holes meet.
2. Tighten each screw into each hole on both left and
right side, ready for mounting.
Please note: If you purchase the single wood bench
option, the single metal bench is no longer needed.
Please discard and do not use.
DOUBLE BENCH OPTION
1 Metal Frame with Mirror
2 Metal Bench Top - Double
3 Screws x 6
ASSEMBLY
1. Position Bench top into frame so screw holes meet.
2. Tighten each screw into each hole on both left and
right side, ready for mounting.
Please note: If you purchase the double bench option,
the single metal bench is no longer needed. Please
discard and do not use.
GENERAL SAFETY
1. Read carefully and keep these instructions in a
safe place.
2. Use this product only for its intended function and
do not use attachments not recommended by the
manufacturer.
3. Do not use outdoors.
ELECTRICAL APPLIANCES
All GPO’s must be installed by a qualified Electrician in
accordance with Australian/New Zealand standards.
IMPORTANT PLEASE READ THESE SAFETY INSTRUCTIONS
WEIGHT: 36kg
ELECTRICALS MUST BE INSTALLED BY A
QUALIFIED ELECTRICIAN IN ACCORDANCE
WITH AUSTRALIAN STANDARDS.
IMPORTANT
1
1
2
2
3
3
INSTALLATION: WALL MOUNTING
SIDE
BEFORE INSTALLING YOU SHOULD CONSIDER THE FOLLOWING:
Allow for the necessary room around the unit for free movement.
When installing,position bench so it is 800 - 850mm from the floor.
This is the recommended bench height.
WALL FIXINGS NOT SUPPLIED.
PLEASE REFER TO MIRROR WEIGHT
WHEN INSTALLING TO DETERMINE BEST
PRACTICE MOUNTING.
WALL STUDS AND NOGGINS ARE NOT
REQUIRED WHEN INSTALLING MIRRORS
All measurements are in MM.
MOUNTING TO WALL
1. Position frame as pictured
2. Using fixings (Not supplied), secure frame to wall
IMPORTANT
PLEASE USE CORRECT FIXTURES FOR MOUNTING BASED ON WALL TYPE. NO RESPONISBILITY
IS ACCEPTED FOR ANY DAMAGE OR INJURY CAUSED BY INCORRECT MOUNTING.
2030
The information contained in this document is subject to change without notice and
should not be construed as a commitment by Comfortel Furniture Pty Ltd.
Comfortel Furniture Pty Ltd. assumes no responsibility for any errors that may appear in
this document nor does it make expressed or implied warranty of any kind with regard
to this material, including, but not limited to, the implied warranties of merchantability
and fitness for a particular purpose.
Comfortel Furniture Pty Ltd. shall not be liable for incidental or consequential damages
in connection with or arising out of the use of this document and the program material.
PRODUCT CODE
PURCHASE DATE INVOICE NUMBER
NOTE YOUR PURCHASE DATE & INVOICE NUMBER FOR FUTURE REFERENCE
#8300 TUSCANY WORKSTATION
Revision Date: 03.11.2016
A periodic inspection of all components and fasteners
should be made to ensure that your Comfortel
product is structurally intact and functioning properly.
Damaged and broken parts should be replaced and
loose fasteners tightened.
All maintenance to be carried out by a suitably
qualified tradesperson.
GENERAL CLEANING
· We recommend the use of soapy water or
approved cleaners.
· This product should not be cleaned with abrasive
materials.
· Damage caused by any improper treatment is not
covered by the product warranty
MAINTENANCE
CLEANING
PLEASE RETAIN THIS INFORMATION FOR FUTURE REFERENCE
For more information about our products and services, contact us at comfortel.com.au
comfortel.com.au
PERIOD AND DESCRIPTION PRODUCTS
12 MONTHS PARTS & LABOR All products
2 YEARS PARTS ONLY All products excluding small electrical appliances
3 YEARS PARTS ONLY All electric actuators
5 YEARS PARTS ONLY Taps cartridge, Ceramic basins
10 YEARS PARTS ONLY Gas-lifts and gas-lift swivel plates
TERMS AND CONDITIONS
For more information about our warranty, please contact us at comfortel.com.au.
WARRANTY PERIOD
©Comfortel Furniture 1997-2017. All rights are reserved.
No part of this document may be photocopied,
reproduced or translated to another language without
written consent of Comfortel Furniture Pty Ltd.
Loading...