Comfort Company Swing-Away Lateral Pads User Manual

SWING AWAY LATERAL PADS

PARTS INCLUDED:

1 - Swing Away Lateral Hardware Assembly (LT_-SF)
1 - 5mm Allen Wrench
1 - 5/32” Allen Wrench

F

E

Toll Free 800.564.9248

www.comfortcompany.com

509 South 22nd Ave Bozeman, MT 59718

I

C

B

A

D

Loosen bolts (A) using the provided 5mm Allen

1

wrench. Fasten the base end of the hardware to
the mounting bracket on the wheelchair in the
order shown above: (A) -> (B) -> (A) -> (C) ->(D) ->
(E) -> (F).

NOTE: You can adjust the depth of the hardware by
sliding the bolt assembly along the slots shown in (E).

H

G

K

J

To adjust the orientation of the mounting

3

brackets (E and H), loosen but do not remove
bolts (J) using the 5mm Allen Wrench. Securely
tighten once mounting brackets are in position.

To swing away the lateral pad, press swing away

4

lever (K). Assembly will snap back into place
when returned to its original position.

Loosen bolts (G) from lateral assembly (H) and

2

securely fasten once they have been properly
positioned using the slots on (I).

IS-SWINGAWAYLATERALPADS

REV0413