Comfort Company Sit N Shape User Manual

509 South 22nd Ave Bozeman, MT 59718

Sit N’ Shape

WARNING: If using a wheelchair, LOCK both wheel breaks before beginning.

Items Included in Box: Part names shown in italics.

Steel Bar Assembly (1)

Yellow Band Set (2)

Toll Free 800.564.9248

www.comfortcompany.com

D-Ring

Fastener

Green Band Set (2)*

Fastener

Wheelchair Connection Straps (2)

D-Ring

*Green Band Set (2) is included with the Sit N’ Shape 2 and offers a higher level of resistance
as compared to the Yellow Band Set.

IS-SITNSHAPE

REV0413

509 South 22nd Ave Bozeman, MT 59718

Sit N’ Shape

WARNING: If using a wheelchair, LOCK both wheel breaks before beginning.

Toll Free 800.564.9248

www.comfortcompany.com

Figure 1

Possible Attachment Points

Figure 4

Using the fastener, attach one yellow band to a D-ring on the assembly bar (Figure 1). Attach the

1

second yellow band to the second D-ring on the assembly bar.

While seated, wrap one wheelchair connection strap around a secure location on the side of the

2

wheelchair (see Possible Attachment Points). Connect the two D-rings of the wheelchair strap with
a fastener from the yellow band set (Figure 2).

Repeat step 2 on the opposite side of the wheelchair.

3

Figure 2

To adjust the length and resistance of the bands, simply roll the bar forward in your fingers to

4

the proper adjustment (Figure 3).

The Sit N’ Shape is now secure and ready to use.

5

IS-SITNSHAPE

REV0413