Comfort Company Rotating Interlock Mount User Manual
ROTATING INTERLOCK MOUNT
Comfort Arm®, Smart Arm, DuraSoft Half Tray, and Swing Clear Half Tray
Parts Included:
1 - Rotating Interlock Hardware Assembly
1 - 3/16” Hex Key
ARM ASSEMBLY IS SHOWN TO SHOW PROPER
MOUNTING POSITION. IT IS NOT INCLUDED IN THE
ROTATING INTERLOCK MOUNT KIT BUT IS AVAILABLE
TO ORDER SEPARATELY.
Toll Free 800.564.9248
www.comfortcompany.com
509 South 22nd Ave Bozeman, MT 59718
REPRESENTS WHEELCHAIR ARM RAIL
B
A
Remove existing armrest from wheelchair.
1
Remove the two screws (A) from the bottom of the clamp using the 3/16” Hex Key provided
2
and position the assembly around the wheelchair arm rail.
Securely fasten the screws (A) as shown to secure the arm rest in place.
3
To adjust angle or swing unit away, loosen the adjustment knob (B).
4
Securely tighten the adjustment knob after the mount is correctly positioned.
5
IS-ROTATINGINTERLOCKMOUNT
REV0413
Loading...