Comfort Company Rigid Lateral Pads User Manual

RIGID LATERAL PADS

PARTS INCLUDED:

Toll Free 800.564.9248

www.comfortcompany.com

509 South 22nd Ave Bozeman, MT 59718

1 - Rigid Lateral Hardware Assembly (LT_-RF)
1 - 5mm Allen Wrench
1 - 5/32” Allen Wrench

A

E

B

F

H

I

D

C

Loosen bolts (A) using the provided 5mm Allen

1 2

wrench. Fasten the base end of the hardware to
the mounting bracket on the wheelchair in the
order shown above : (A) -> (B) -> (A) -> (C) ->(D) ->
(E) -> (F).

NOTE: You can adjust the depth of the hardware by
sliding the bolt assembly along the slots shown in (E).

J

3

G

Loosen bolts (G) from lateral assembly (H) and
securely fasten once they have been properly
positioned using the slots on (I).

To adjust the orientation of the mounting
brackets (E and H), loosen but do not remove
bolts (J) using the 5mm Allen Wrench. Securely
tighten once mounting brackets are in position.

IS-RIGIDLATERALPADS

REV0413