Comfort Company Lowrider User Manual

Toll Free 800.564.9248

www.comfortcompany.com

509 South 22nd Ave Bozeman, MT 59718

LOWRIDER

®

Warning: Securing clips must be installed to secure back to wheelchair canes.

Bottom View

1

L Bracket

(A)

(D)

3

Side View (close-up)

2

J Hook

4

End View

(B)

Washer

Lock Washer

L Bracket

Side View

(E)

(C)

Finger tighten longer screw, washer and nut

Remove existing sling seat from wheelchair. To determine which of the three hole locations (a) to

1

install the L-bracket, hold dropseat over wheelchair so that L-bracket clears wheelchair cross
members and hardware.

Loosely secure L-bracket to Drop Seat base (B) using hardware in kit bag #1.

2

Determine the amount of seat drop required. Using the short screw in kit bag #2, mount J-hook

3

(C) to L-brackets.

Place Drop Seat in wheelchair. Adjust L-bracket to width of chair (D) (Seen in Diagram 1). Make

4

final adjustment of seat height and angle. Tighten all screws. Assemble securing clips in kit bag
#3. Mount secure clip on the outside of J-hook as shown above (E).

IS-LOWRIDER

REV0413