Comfort Company Embrace Moldable Insert User Manual

EMBRACE MOLDABLE INSERT

Toll Free 800.564.9248 www.comfortcompany.com 509 South 22nd Ave Bozeman, MT 59718

www.comfortcompany.com

IS-EMBRACEMOLDALBEINSERT

REV0413

EMBRACE MOLDABLE INSERT

PARTS INCLUDED:

1 - Embrace Moldable Metal Insert
1 - Bending Tool

Modify the rear fingers of the insert using your hand or the provided bending tool.

1

Gentle Support - Slight bend in rear finger on a

A.

Zero-Elevation Cushion.

Moderate Support- Medium bend in rear fingers on a

B.

Zero-Elevation or Anti-thrust Cushion.

Aggressive Support- Aggressive bend in rear fingers on an

C.

Anti-thrust or Anti-thrust Acta-Embrace Cushion.

Adjust the insert to address the patient’s side lean or tilted pelvis (Obliquity).

2

Mild Support- Give input to one or both sides.

A.

Moderate Support- Give input at the hip or at the pelvis.

B.

Aggressive Support- If the client has a fixed side lean, it is easy to

C.

adjust the moldable insert to meet the pelvis. Provide input on the

low side of the pelvis to encourage movement towards

neutral posture.

Very Aggressive Support- Capture the greater trochanters to

B.

provide greater stability.

Adjust the insert to address the patient’s rotated or windswept hips/legs.

3

Adjusted Support- Match the internal or external rotation of the

A.

hips or legs. Match the elevation of one side of the pelvis, hip or

knee as needed.