Comfort Company Active Headrest Half User Manual
ACTIVE HEADREST - HALF
PARTS INCLUDED:
3 - 10-32 x .375” Button Head Screws
1 - 5mm Hex Key
1 - 5/32” Hex Key
1 - 1/8” Hex Key
7
Toll Free 800.564.9248
www.comfortcompany.com
509 South 22nd Ave Bozeman, MT 59718
5
Open the quick release toggle (1) and separate
1
from the mounting plate (2) from the main
headrest.
8
3
9
1
2
4
6
Insert the main headrest post (6) into the
5
mounting plate (2) and close the quick release
toggle (1).
Attach the mounting plate (2) to the back rest
2
using the 4 bolts and washers (3) with a 1/8”hex
key in the kit bag. Add shim (4) to lie in between
the back rest and the mounting plate as shown in
the figure.
Attach the headrest pad to the headrest ring (5)
3
using three 10-32 bolts and a 5/32” hex key in
the kit bag.
Insert the main headrest post (6) into the
4
mounting plate (2) and close the quick release
toggle (1).
Tighten each bolt (7) firmly once the headrest
6
in properly fitted.
When the main headrest post is at the correct
7
height, lower the collar (8) to the mount plate
(2) along the mounting post and tighten the set
screw (9) using a 1/8” hex key. This will ensure
the headrest is returned to the correct position
after it is removed for transfers.
IS-ACTIVEHEADRESTHALF
REV0413
Loading...