Comfort Company Active Headrest User Manual
ACTIVE HEADREST
Toll Free 800.564.9248
www.comfortcompany.com
509 South 22nd Ave Bozeman, MT 59718
Open Quick Release toggle (1) and sepa-
1
rate the mounting plate (2) from the main
headrest assembly
2
2
6
1
4
5
Attach the mounting plate to the backrest
A.) If the backrest has pre-drilled holes,
thread and tighten the 4 bolts with
washers and lock washers (3) using a
4 mm hex key.
B.) If the backrest has t-nuts inserted into
the holes, insert and tighten fouR
bolts from the kit back into the 4
inner holes on the mount plate (4).
Attach the headrest pad to the head-
3
rest ring (5) using the three 10-32
bolts and 5/32 hex key in the kit bag.
Insert the main portion of the head-
4
rest into the mount plate.
Loosen the bolts at each joint to
5
adjust the headrest pad to the desired
location. Tighten each bolt firmly.
3
When the main headrest assembly is at
6
the correct height, lower number 6 to
mount plate and tighten using the M3
hex key. This will ensure the headrest is
returned to the correct position after it
is removed for transfers.
IS-ACTIVEHEADREST2
REV0413
Loading...