Comfort Company 75К Full Durasoft Lap Tray User Manual

75K FULL DURASOFT LAP TRAY

PARTS INCLUDED:

1 - 75K Full Durasoft Lap Tray

*Note - Phillips screw driver is required for installation.

Toll Free 800.564.9248

www.comfortcompany.com

509 South 22nd Ave Bozeman, MT 59718

E

C

Remove existing armrest from wheelchair.

1

Using a Phillips screw driver, remove two screws

2

(A) from bottom clamp (B). Position the wheel­chair arm rail in line with the clamps (B). The
wheelchair arm rail is represented by (C). Then
reinstall skid plate (D) and clamp (B) using the
screws (A).

F

D

B

A

Finally, secure the lap tray in position by using

5

the hook and loop strap (F) and wrapping it
around the far wheelchair arm rail.

To flip the lap tray (E) into the upright position,

6

undo the hook and loop strap (F) and rotate
the lap tray about the arm rail (C).

IS-75KFULLDURASOFTLAPTRAY

REV0413