Comfortaire U11 HARMONY, WHISPERFLO 7200 Owner's Manual
IMPORTANT:
}If anything is missing, please contact Customer Service at 1-800-759-0594 immediately.
}If you purchased a foundation, please place it on the bed frame rst.
}It will take approximately 30-60 minutes to complete the assembly process.
}If, during the assembly or at any time you have a question or problem, please consult the troubleshooting
guide within this manual. If the guide does not provide a solution, contact customer service by phone at
1-800-759-0594 or by e-mail at support@comfortaire.com.
}If you misplace this manual, you may nd it on our web site at www.comfortaire.com.
CHECK YOUR CONTENTS:
A: MAT TRESS COVER:
1 cover with 2 parts zipped together.
B: FOAM TOPPER:
(1) - EvellaFoam™ energetic memory foam topper.
C: AIR CHAMBER(S):
2 for dual chambers or 1 for Twin-XL size.
D: BASE FOAM:
2 single HR base foam pads
E: AIR CONTROL SYSTEM:
1 Whispero® 7200 Air control system -
See the air control instruction sheet located in
the air control system box for detailed info.
C
B
ADJUSTABLE
BASE
Sold separately
D
E
HARMONY
U
11
™
A
AIR CONTROL SYSTEM SERIAL NUMBER
CC062714-102356
Copyright © 2014 Comfortaire®
OWNER’S MANUAL
Instructions for assembly & use
Please retain for reference
Activate your warranty NOW by going to
www.comfortaire.com/warranty-access
1
2
3
4
HOSES FROM AIR
CONTROL SYSTEM BASE
CONNECT HOSES
HOSES FROM
MAT TRESS
CHAMBER
IN-LINE HOSE
CONNECTOR
HEAD
FOOT
INSERT BASE FOAM:
}Remove mattress cover and topper foam from clear plastic bag.
Set topper foam aside and allow up to 30 minutes recovery time to
regain full shape.
}Lay cover on top of boxspring, foundation, or platform with quilted
side of cover facing upwards with the precut air slots and law tag at
the head of the mattress. (FIG. 1)
}Completely unzip top section and set it aside. (FIG. 1)
}Insert the one piece base foam pads (left and right side) into the
base of the mattress cover. (FIG. 2)
INSERT AIR CHAMBERS:
}Retrieve air chambers from box.
}With air hoses facing the head of the mattress, lay air
chambers at inside top cavity. (FIG. 3)
}Insert air hoses through pre-cut slots located at head
of the mattress.
SETUP AIR CONTROL SYSTEM:
}Remove air control system base, hand controls, and power cord
from the box.
See Air Control System Instruction Sheet inside air control system box
for more information.
}Insert the hand control cord and power cord into the air
control base unit.
}Attach air hose(s) from the mattress to the in-line hose connectors
from the air control system. (FIG. 4)
}Plug air control system base into power outlet.
AIR HOSES
AT THE HEAD
INSERT BASE
FOAM PADS
INFLATE AIR CHAMBERS:
}By pressing the button marked “FULL” on the hand control,
allow chambers to inate until the air control system stops.
You may only inate one air chamber at a time. (FIG. 5)
INSERT TOPPER FOAM:
}Place the topper foam on top of the air chambers. (FIG. 6)
FINISHING ASSEMBLY:
}Place top panel of mattress cover over the topper foam and
air chambers.
}Release some air for easier zipping of the mattress cover.
}Pull down inner fabric ap so that it covers the foam and begin
zipping top panel. When zipping top panel, be sure to pull top
and bottom panels together to avoid breaking the zipper.
(EXAMPLE SHOWN BELOW)
INNER FABRIC
FLAP
}Do not cut, damage, or remove the re protective
cover around the topper foam. (FIG. 7)
}Assembled mattress. (FIG. 8)
}See Air Control System instruction sheet for operation
guidelines.
}Air control system may be placed under boxspring, foundation,
or platform
CAUTION!
Your safety is very important to us. For this reason, we have
included explicit written instructions on how to assemble your
mattress. When your mattress is assembled in accordance with
the instructions herein, it meets the strictest re standard - 16 C.
F. R. part 1633. Comfortaire will not be liable for re damage and
possible personal injuries related to an improperly assembled
mattress. If you have any questions, please contact us directly at
1-800-759-0594 Monday - Friday 8AM - 5PM Eastern.
5
6
7
8
PLACE
TOPPER FOAM
INNER FABRIC
FLAP
FULL
BUTTON
Loading...