COMFORT-AIRE SVH09SA-0, SVH12SA-0, SVH12SA-1, SVH18SA-1, SVH09SA-1 Remote Control Manual
...
Remote Control Manual
SVH Series
Inverter Single Zone Ductless Mini-Split
SVH09SA-0
SVH09SA-1
SVH12SA-0
SVH12SA-1
SVH18SA-1
SVH24SA-1
www.marsdelivers.com
Remote Control Manual - SVH 09/12/18/24 Series
Model
Rated Voltage
8m
3.0V(Dry batteries R03/LR03¡2)
RG51F/EU1, RG51F1/EU1, RG51F3/EU1
Remote Controller Specifications
Environment
Signal Receiving
Range
TEMP
AUTO
COOL
DRY
HEAT
O
SET TEMPERATURE( F)
62 F~86 F
CONTENTS
Remote controller Specifications...................................................
Operation of buttons .................. ..................................................
Indicators on LCD ..........................................................................
How to use the buttons .................................................................
Auto operation.................................................................................
Cooling/Heating/Fan operation......................................................
Dehumidifying operation ...............................................................
Timer operation...............................................................................
Handling the remote controller ......................................................
2
3
6
7
7
7
8
9
12
Remote Control Manual - SVH 09/12/18/24 Series
Remote Controller Specifications
Model
Rated Voltage
Signal Receiving
Range
Environment
SET TEMPERATURE( F)
AUTO
COOL
DRY
HEAT
TEMP
RG51F/EU1, RG51F1/EU1, RG51F3/EU1
3.0V(Dry batteries R03/LR03¡2)
8m
O O
62 F~86 F
O
FAN
HIGH
MED
LOW
AUTO
COOL
DRY
HEAT
SET TEMPERATURE( F)
TEMP
O
FAN
HIGH
MED
LOW
MODE
SWING
CLEAN
AIR
ON/OFF
ECO
RESET LOCK
LED
DISPLAY
FAN SPEED
TIMER ON
TIMER OFF
TURBO
Model: RG51F3/EU1
RG51F/EU1(This model does not
have clean air button)
MODE
SWING
SWING
ON/OFF
ECO
RESET LOCK
FAN SPEED
LED
DISPLAY
TURBO
TIMER ON
TIMER OFF
Model : RG51F1/EU1
2
Remote Control Manual - SVH 09/12/18/24 Series
Operation of buttons
TEMP
AUTO
COOL
DRY
HEAT
MODE
ECO
ON/OFF
RESET LOCK
1
4
5
6
7
8
3
SET TEMPERATURE
SWING
SWING
LED
DISPLAY
Model : RG51F1/EU1
Operation of buttons
SET TEMPERATUREO( F)
AUTO
COOL
DRY
HEAT
TEMP
FAN
HIGH
MED
LOW
2
MODE
ON/OFF
FAN SPEED
3
SWING
4
CLEAN
5
AIR
RESET LOCK
6
7
ECO
LED
DISPLAY
TIMER ON
TIMER OFF
TURBO
8
Model: RG51F3/EU1
RG51F/EU1(This model does
not have clean air button)
1
10
11
12
13
14
TEMP UP Button
1
Push this button to increase the indoor temperature setting in 1 F increments to 86 F.
TEMP DOWN Button
2
Push this button to decrease the indoor temperature setting in 1 F increments to 62 F.
NOTE£Temperature contol is not available
in Fan mode.
NOTE: Press and hold UP and DOWN buttons
together for 3 seconds will alternate the temperature display between the C & F scale.
9
3
MODE Button
Press this button to modify the air conditioner
O O
O O
OO
mode in a sequence of following:
AUTO
COOL
DRY
HEAT FAN
SWING/SWING Button
4
Used to stop or start horizontal louver movement or set the desired up/down air flow
direction. The louver changes 6 degree in
angle for each press. If keep pushing more
than 2 seconds, the louver will swing up and
down automatically.
ECO Button:
5
Used to enter the energy efficient mode.
Under cooling mode, press this button, the
remote controller will adjust the temperature
automatically to 75 F, fan speed of Auto to
O
save energy(but only if the set temperature
is less than 75 F). If the set temperature is
between 75 F and 86 F, press the ECO
O
O O
button, the fan speed will change to Auto,
the set temperature will remain unchanged.
NOTE:
Pressing the TURBO and SLEEP button,
modifying the mode or adjusting the set
temperature to less than 75 F will stop
O
ECO operation.
3
Remote Control Manual - SVH 09/12/18/24 Series
Operation of buttons
Under ECO operation, the set temperature
should be 75 F or more. it may result in
O
insufficient cooling. If you feel uncomfortable,
just press the ECO button again to stop it.
SET TEMPERATUREO( F)
AUTO
COOL
DRY
HEAT
FAN
HIGH
MED
LOW
CLEAN AIR Button(applicable to RG51F3)
6
Disable/Active clean air function. When the
clean air function is initiated, the Ionizer/
Plasma Dust Collector(depending on models)
TEMP
1
MODE
ON/OFF
FAN SPEED
3
SWING
4
5
SWING
RESET LOCK
6
7
ECO
LED
DISPLAY
TIMER ON
TIMER OFF
TURBO
2
9
10
11
12
13
is energized and will help to remove pollen
and impurities from the air.
Swing Button(applicable to RG51F1)
Used to stop or start vertical louver
movement and set the desired left/right air
flow direction. The vertical louver changes
6 degree in angle for each press.
RESET Button
7
Once the recessed RESET button is pressed,
8
14
all of the current settings will be cancelled and
the controller will return to the initial settings.
Model : RG51F1/EU1
8
LED Button
Disable/Active indoor screen Display. When
pushing the button, the indoor screen display
is cleared, press it again to light the display.
9
ON/OFF Button
Operation starts when this button is pressed
and stops when the button is pressed again.
10
FAN SPEED Button
Used to select the fan speed in four steps:
Auto Low Med High
11
TIMER ON Button
Press this button to initiate the auto-on
time sequence. Each press will increase
the auto-timed setting in 30 minute
increments. When the setting time displays
10.0, each press will increase the autotimed setting 60 minute increments.
To cancel the auto-timed program, simply
adjust the auto-on time to 0.0.
4
Loading...