COMFILE P200, P220 Hardware Manual

CUPC
Hardware Manual
(P200, P220)
[Version 2.0]
COMFILE Technology , Inc.
CUPC manual
CUPC-P200/P220 Hardware Manual
COMFILE Technology, Inc. www.comfiletech.com page 2
1. Hardware Specification
Model name
Item
CUPC-P200 CUPC-P220
CPU
Intel A TOM N270 1.6GHz
Chipset
Intel 945GSE + ICH7M
Memory
2GB SODIMM DDR2 SDRAM
Graphic & Display
Intel 945GSE Embedded Graphics Support VGA CRT output Support Pivot
LCD
15inch
16.7M Colors, XGA(1024x768), 300cd/m
2
10.4inch 262K Colors, XGA(1024x768), 300cd/m2
Backlight
2Channel CCFL LT : >50,000hr
1Channel CCFL LT : >30,000hr
Ethernet
VIA VT6130 Gigabit Ethernet(2Port)
Audio
VIA High Definition Audio Audio Out (1Port) MIC In (1Port)
USB
Universal Serial Bus Support (4Port) Support USB2.0 Host Controller
HDD
SATA HDD Interface
Serial
RS232C Serial (2Port)
Input Power
DC+12V
Power Consumption
<32W (2.6A@12V) <28W (2.3A@12V)
Dimension(mm)
376(H) x 300(V) x 60(D) 280(H) x 300(V) x 60(D)
Weight
5.1Kg 2.5Kg
Operating Temperature
0 ~ 60
CUPC manual
CUPC-P200/P220 Hardware Manual
COMFILE Technology, Inc. www.comfiletech.com page 3
2. External Parts
Name Description
A Power/HDD LED
The green LED is turned on, when the power is supplied. The red LED is turned on, when the hard disk is read or written.
B ATX Power S/W ATX mode power switch. Boot or exit the system. C Ext. Power S/W
The connector which can be linked to external switch. Same function with ATX Power switch
D Power S/W Power input ON/OFF E DC IN ø2.5 Adaptor Input Connector (DC +12V) F USB Port USB1/USB2 (USB2.0) G VGA Port VGA output for external monitor. H Audio Out Sound output for external speaker
I MIC IN Microphone input
J LAN2 Port Support 100BaseT, with RJ-45 type connector K LAN1 Port Support 100BaseT, with RJ-45 type connector L USB Port USB3/USB4 (USB2.0)
M COM1 Port COM1 (RS232C, D-SUB 9Pin Male Type) N COM2 Port COM2 (RS232C, D-SUB 9Pin Male Type)
CUPC manual
CUPC-P200/P220 Hardware Manual
COMFILE Technology, Inc. www.comfiletech.com page 4
3. Dimensions
[CUPC-P200]
Avoid using long bolts when assembling VESA mounts or add-on board. The inner maximum length is about 12mm.
Back cover of
product
CUPC manual
CUPC-P200/P220 Hardware Manual
COMFILE Technology, Inc. www.comfiletech.com page 5
[CUPC-P220]
Avoid using long bolts when assembling VESA mounts or add-on board. The inner maximum length is about 10mm.
Back cover of
product
CUPC manual
CUPC-P200/P220 Hardware Manual
COMFILE Technology, Inc. www.comfiletech.com page 6
4. PANEL CUTOUT
Installation Requirements
CUPC-P200/P220 Installation
X: Panel Cutout Width, Y: Panel Cutout Height, T: Panel Thickness Unit: mm[in.]
CUPC X Y T
P200
355
[13.98]
279
[10.99]
1.6 to 12.0
[0.06 to 0.47]
P220
263
[10.36]
210
[8.27]
1.6 to 6.0
[0.06 to 0.24]
CUPC manual
CUPC-P200/P220 Hardware Manual
COMFILE Technology, Inc. www.comfiletech.com page 7
5. Bracket Installation
CUPC-P200
To fasten CUPC-P200 to an upright panel, the brackets (left, right) are supplied when you
purchase P200.
* Procedure *
1) Push and install the CUPC-P200 into your panel.
2) Press the bracket as the following directions in two steps.
3) To fix the CUPC-P200 to the panel, fasten the bolts.
CUPC manual
CUPC-P200/P220 Hardware Manual
COMFILE Technology, Inc. www.comfiletech.com page 8
CUPC-P220
To fasten CUPC-P220 to an upright panel, the brackets (left 2ea, right 2ea) are supplied
when you purchase P220.
* Procedure *
1) Push and install the CUPC-P220 into your panel.
2) Press the bracket as the following directions in two steps.
3) To fix the CUPC-P220 to the panel, fasten the bolts.
CUPC manual
CUPC-P200/P220 Hardware Manual
COMFILE Technology, Inc. www.comfiletech.com page 9
6. Input/Output Connectors
VGA Output Connector
Connector Type
* D-SUB 15Pin Female
Pin Assignment
Order Name Order Name
1 RED 2 GREEN 3 BLUE 4 ­5 GND 6 GND 7 GND 8 GND
9 DDC VCC (+5V) 10 GND 11 - 12 DDC DATA 13 HSYNC 14 VSYNC 15 DDC CLK - -
RS232C Input/Output Connector (COM1, COM2)
Connector Type
*D-SUB 9Pin Male
Pin Assignment
Order Name Order Name
1 DCD 2 RXD 3 TXD 4 DTR 5 GND 6 DSR 7 RTS 8 CTS 9 RI - -
CUPC manual
CUPC-P200/P220 Hardware Manual
COMFILE Technology, Inc. www.comfiletech.com page 10
Power Input Connector
* ø 2.5 Adaptor Jack
CUPC manual
CUPC-P200/P220 Hardware Manual
COMFILE Technology, Inc. www.comfiletech.com page 11
7. Warranty Policy
Warranty Period
The products are warranted to be free of defects in materials and workmanship for 1 year from the date of purchase.
Warranty Exclusions
The warranty does not cover abrasion and is considered void if the product is opened by unauthorized person, damaged by abnormal use, heat or humidity, or used against user manual.
Request of Warranty Repair
If the products have defect(s) during the warranty period, the customer should inquire at the manufacturer or dispatch the products with the description to the address the manufacturer provides. If the request is appropriate, the manufacturers repairs and dispatch it to the customer.
Limitation of Liability
The manufacturer and distributor are not responsible for damages or breakdowns caused by direct or indirect reasons, and the maximum duty of manufacturer and distributor are limited to the total amount paid by the customer. The limitations or exclusions of warranty have priority over any other warranty expressed explicitly, implicatively, in writing, or orally.
CUPC
Hardware Manual
(P200, P220)
Contact Information
Should you need any additional information or assistance about CUPC, please feel free to contact us.
Comfile Technology Inc.
1175 Chess Dr., Suite F, FOSTER CITY, CA 94404, U.S.A
Telephone
Toll-Free : (888) 9CUBLOC, (888) 928 2562
Office : (650) 638 1350 Fax : (650) 638 1360 Office Hours: Monday-Friday 8am-5pm PST
E-mail
Sales: sales@comfiletech.com Technical Support: support@comfiletech.com
Loading...