CPCi3-150WF
Hardware Manual
[Version 1.0]
CUPC Manual
CPCi3-150WF Hardware Manual
Comfile Technology , Inc www.ComfileTech.com • page 2
1. Hardware Specification
Item
Model
CPCi3-150WF
CPU
Intel Core i3-3225
3.3GHz Dual Core Processor
Chipset Intel H61 Express Chipset
Memory 4GB SO-DIMM DDR3/PC3-10600(1333MHz)
Graphic & Display
Intel HD Graphics 4000
1xDVI Output Port
1xHDMI Port
LCD 15inch,16.7M Colors, XGA(1024x768), 300cd/m2
Backlight
2Channel CCFL
LT : >50,000hr
Ethernet
Intel 82579V Gigabit Ethernet Controller
1xGigabit Ethernet Port
Audio
Realtek ALC892 Audio codec
1xAnalog Stereo line-out
1x
Analog line-in
USB
Back Panel : 2xUSB3.0, 2xUSB2.0
Front Panel : 2xUSB2.0
HDD
120GB SATA SSD
1x eSATA Port
Serial 5-Wire Resistive Touch
Input Power DC+19V
Power Consumption
Dimension(mm) 376(H) x 300(V) x 103(D)
Weight 5.4Kg
Operating Temperature 00C ~ 600C
CUPC Manual
CPCi3-150WF Hardware Manual
Comfile Technology , Inc www.ComfileTech.com • page 3
2. Input/Output Ports
Name Description
A ATX Power Switch Press to power on. Press and hold to power off.
B Front USB Ports USB2.0 Port
C Power/HDD LED
Green when powered on. Red when hard disk is being
read or written.
D Power Supply Switch
Switches power supply on or off.
E ATX Power Switch
Same as A.
F Ext. Power Switch
Connector for adding an external ATX power switch
G
DC IN ø2.5 power adaptor connector. (DC +19V)
CUPC Manual
CPCi3-150WF Hardware Manual
Comfile Technology , Inc www.ComfileTech.com • page 4
H
USB Port USB 3.0 Port(Use after installing driver)
I
DVI Port DVI output for connecting an external monitor.
J
eSATA eSATA port for connecting an external HDD
K
HDMI Port HDMI port for connecting an external monitor.
L
LAN Port Gigabit RJ-45 Ethernet port
M
USB Port USB 2.0 Port
N
Audio Out Speaker output jack for connecting external speakers
O
Analog Audio IN Analog Audio input jack
CUPC Manual
CPCi3-150WF Hardware Manual
Comfile Technology , Inc www.ComfileTech.com • page 5
3. Dimensions
Avoid using long bolts when assembling
VESA mounts or add-on board.
The inner maximum length is about
10mm.
Back Cover
Front USB port cove
r
CUPC Manual
CPCi3-150WF Hardware Manual
Comfile Technology , Inc www.ComfileTech.com • page 6
4. Panel Cutout
▌ Recommended Clearance
▌ Recommended Paneling Dimensions
X: Panel Cutout Width, Y: Panel Cutout Height, T: Panel Thickness
Unit: mm[inch]
CUPC X Y T
CPCi3-150WF
355
[13.98]
279
[10.99]
1.6 to 12.0
[0.06 to 0.47]
CUPC Manual
CPCi3-150WF Hardware Manual
Comfile Technology , Inc www.ComfileTech.com • page 7
5. Mounting Brackets and Front Cover
▌ Mounting Brackets
Panel mounting brackets are supplied to mount the CUPC to an upright panel (upper/lower/left/right 2ea.).
1. Insert the product into the panel’s cutout.
2. Insert the bracket’s hook into the product’s bracket mounting slot.
3. Slide it to the side to secure it in place.
CUPC Manual
CPCi3-150WF Hardware Manual
Comfile Technology , Inc www.ComfileTech.com • page 8
4. Fasten the bolts to secure the product to the panel. (Warning! To avoid damage or deformation, be careful
not applying too much torque when fastening the bolts)
5. Repeat steps 2 ~ 4 until product is mounted as shown in the image below.
- Rear view of CUPC with bracket mounting completed –
CUPC Manual
CPCi3-150WF Hardware Manual
Comfile Technology , Inc www.ComfileTech.com • page 9
▌ Front Cover
1. Loosen the thumb-wheel on the right of the cover and rotate the cover downward to reveal the front USB ports
and ATX power switch.
– Loosen the cover’s thumb-wheel – – Rotate cover downward –
2. The front-facing ATX switch and USB ports will be revealed as shown in the image below.
- Front cover revealing ATX power switch and front-facing USB ports –
3. Do the reverse of the above to return the cover to its original position. (Excessive use of this cover has the
potential to cause the screw on the left to grow loose. If this occurs, use a small coin to tighten.)
CUPC Manual
CPCi3-150WF Hardware Manual
Comfile Technology , Inc www.ComfileTech.com • page 10
6. Power Connectors
▌Power Input Connector
* ø 2.5 Adaptor Jack
CUPC Manual
CPCi3-150WF Hardware Manual
Comfile Technology , Inc www.ComfileTech.com • page 11
7. W arranty Policy
▌ Warranty Period
The products are warranted to be free of defects in materials and workmanship
for 1 year from the date of purchase.
▌ Warranty Exclusions
The warranty does not cover abrasion and is considered void if the product is
opened by unauthorized personnel, damaged by abnormal use, heat or humidity, or
used against recommendations in the product manual.
▌ Request of Warranty Repair
If the products have defect(s) during the warranty period, the customer should
inquire at the manufacturer or dispatch the products with a description of the problem
to the address the manufacturer provides. If the request is appropriate, the
manufacturer will repair and return the product back to the customer.
▌ Limitation of Liability
The manufacturer and distributor are not responsible for damages or breakdowns by
direct or indirect causes, and the maximum duty by manufacturer and distributor are
limited to the total amount paid by the customer. The limitations or exclusions of
warranty have priority over any other warranty expressed explicitly, implicitly, in
writing, or orally.
CUPC Manual
CPCi3-150WF Hardware Manual
Comfile Technology , Inc www.ComfileTech.com • page 12
CUPC
Hardware Manual
(CPCi3-150WF)
Contact Information
Should you need any additional information or assistance about CPCi3-150WF, please
feel free to contact us.
Comfile Technology Inc.
14 Pidgeon Hill Drive, Suite 310, Sterling, VA 20165, USA
Telephone
Toll-Free : (888) 9CUBLOC, (888) 928 2562
Office : (571) 322 5010
Fax : (571) 322 5011
Office Hours: Monday-Friday 9am-5:30pm EST
E-mail
Sales: sales@comfiletech.com
Technical Support: support@comfiletech.com
Loading...