COMEUP DHC Hoist User Manual
Heavy Duty Hoist
Limited One (1) Year Warranty
WARRANTY
Comeup Industries Inc. ( COMEUP ) warrants to the original purchaser that COMEUP heavy duty hoist will be
free of defects in material and workmanship for a period of one (1) year from the original date of purchase. All
mounting kits and other accessories carry a one (1) year limited warranty against defects in material workmanship.
This warranty applies only to the original purchaser of the hoist. To obtain any warranty service, the purchaser
under this Limited Warranty is requested to advise COMEUP or its authorized distributors on any claim. The
purchaser must provide a copy of the purchase receipt bearing the hoist serial number, date of purchase, owners
name, email or Tel & Fax, address and purchaser vehicle details. Any products that COMEUP determines to be
accountable for defective will be repaired or replaced or refund at COMEUP sole discretion without charge to
buyer upon buyer’s compliance with these procedures. In the event of repair or replace, purchaser must send the
defective hoist or part, with freight prepaid, to COMEUP or its authorized distributor. And COMEUP will send the
serviced product back to purchaser on COMEUP’s cost. This warranty does not cover the removal or reinstallation
of the hoist.
COMEUP takes the responsibility for COMEUP hoist parts and components to be free from defects in materials
and workmanship, but the following portions are hereby excluded and disclaimed. COMEUP or its authorized
distributors may make reasonable charges for parts and labour for repairs or resumption in the following portions
not covered by this limited warranty.
(1). All warranties of wire rope assembly after initial use
(2). All warranties of fitness for a particular purpose
(3). All warranties of the product’s finish
(4). All warranties of merchantability
The limited warranty does not cover any failure that results from improper installation/operation, third party part
substitution, purchaser’s alteration or modification on COMEUP hoist. This warranty is void when COMEUP serial
number plate is removed or defaced.
COMEUP’s liability to the purchaser under the hoist purchases for any loss or damage howsoever and whatsoever
arising shall not exceed the price of the initial hoist purchase receipt. COMEUP shall not in any event be liable to
the purchaser for any consequential and/or indirect loss or damage whether for loss or for profit or otherwise, costs,
expenses or other claims for consequential compensation whatsoever and whether caused by negligence of employees,
distributors and their employees or otherwise. COMEUP reserves the right to change product design without
In situations in which
or otherwise modify previously manufactured products.
COMEUP has changed a product design, COMEUP shall have no obligation to upgrade
notice.
1
Heavy Duty Hoist
Thank you for purchasing a Hoist. This manual covers operation and maintenance of
the hoist. All information in this publication is based on the latest production information available at
the time of printing. We reserve the right to make changes without notice because of continued product
improvement.
It has been designed to give safe and dependable service if operated according to the instructions.
Read and understand this manual before installation and operation of hoist. Careless hoist operation
can result in serious injury or property damage.
When requesting information or ordering replacement parts, always give the following information:
1. Hoist model and voltage
2. Serial Number
3. Item. No. and Part Number
4. Part Description
WARNING
！
1. The hoist is rated at the first layer of wire rope on the drum for S3 Intermittent duty.
2. A minimum of five (5) wraps of rope around the drum is necessary to support the rated load.
3. Keep clear of hoist, rope, and hook while operating.
4. Wire rope can break without warning. Always keep a safe distance from the hoist and rope while under
a load.
5. Failure to adequately align, support, or attach hoist to a suitable mounting base could result in a loss
of efficiency of performance or damage the hoist, rope and mounting channel.
6. The hoist is a very powerful machine. Treat with extreme care and observe all caution and warnings.
2
I . Safety Requirement
WARNING
！
1. The owner and/or the operator shall have an understanding of these
operating instructions and the warning before operating the electrical hoist.
Failure to follow these warnings may result in loss of load, damage to the
hoist, property damage, personal, or fatal injury.
2. The owner shall retain this manual for further reference to important
warnings, installation, operating and maintenance instructions.
General Rules
The operator of a hoist in some cases is required to have qualifications according to applicable
！
laws and ordinances.
Check all safety and environmental conditions prior to and during use.
！
Don’t use unsuitable rope in construction, strength or having any defects.
！
Don’t use an unsuitable hook and snatch block for rope.
！
The operator must remain with the hoist when it is being operated.
！
The hoist is rated at S3 Intermittent duty only.
！
Do not use the hoist as moving people.
！
Ensure that the hoist is connected to the correct voltage. 12V DC or 24V DC only.
！
Do not exceed maximum line lifting shown in tables. Shock load must not exceed these ratings.
！
A rope should be replaced if it shows signs of excessive wear, broken strands, corrosion or
！
any other defects.
If the hoist fails to lift a load under normal conditions, stop the operation within 30 seconds
！
otherwise motor damage may occur.
！
Remove the switch from the hoist when not in use.
Keep hands and clothes away from the hoist and rope.
！
Never unplug the remote control when hoisting a load.
！
To avoid insufficient power when hoisting a load, the vehicle should be running and in neutral.
！
If noise or vibration occurs when running, stop the hoist immediately and return it for repair.
！
The rope shall be wound in according to drum rotation sticker or refer to owners manual.
！
3
Loading...