COMEUP Chain Hoist User Manual

Baby Chain Hoist

Limited One (1) Year Warranty Statement

COMEUP Industries Inc. ( ) warrants to the original purchaser that the mechanical

components and electrical components of the baby chain hoist will be free of defects in

material and workmanship for one (1) year. All mounting kits and other accessories carry

one (1) year limited warranty against defects in material workmanship.

This Warranty applies only to the original purchaser of the chain hoist. To obtain any warranty

service, the Purchaser under this Limited Warranty is requested to report or his authorized

distributors of any claims. The Purchaser must provide a copy of the proof of purchase bearing the

chain hoist serial number, date of purchase, owners name and address, vehicle details and registration

number. Any product determines to be defective will be repaired or replaced at

sole discretion without charge to Buyer upon Buyer’s compliance with these procedures. Seller or its

Authorized Distributors may make reasonable charges for parts and labour for repairs not covered by

this Limited Warranty.

takes the responsibility for all parts and components to be free from defects in materials

and workmanship, but the following are hereby excluded and disclaimed:

(1). All warranties of load chain assemblies after initial use.

(2). All warranties of fitness for a particular purpose.

(3). All warranties of the product’s finish.

(4). All warranties of merchantability

The Limited Warranty does not cover any failure that results from improper installation, operation

or the Purchaser’s modification in design. reserves the right to change Product design

without notice. In situations in which has changed a product design, shall have

no obligation to upgrade or otherwise modify previously manufactured products.

1

Baby Chain Hoist

Thank you for purchasing a Chain Hoist. This manual covers operation and maintenance

of the chain hoist. All information in this publication is based on the latest production information available

at the time of printing.

General Safety Precautions

A chain hoist is designed to give safe and dependable service if operated according

to the instructions. Read and understand this manual before installation and operation of the chain hoist.

Follow these general safety precautions:

● Before operating the chain hoist, the operator must understand and comply with the requirements of

the law concerned.

● Confirm that the winch complies with the using conditions.

● Keep the chain hoist secure strongly.

● Don't use unsuitable load chain, weight hook or pulleys concerned.

● Don't use unsuitable load chain in grade, strength or having any defects.

● Pay attention to the grounding, it provides a path of least resistance for electric current to reduce the

risk of shock.

● Check the winch for smooth operation without load before loading operation.

WARNING

！

1. The chain hoist is not to be used to life, support or otherwise transport personnel.

2. The owner and/or the operator shall have an understanding of these operating instructions and the
warning before operating the electrical chain hoist. Failure to follow these warnings may result in loss
of load, damage to the chain hoist, load chain damage, personal, or fatal injury.

3. The owner shall retain this manual for further reference to important warnings, installation, operating
and maintenance instructions.

4. Hoist operators shall be trained to be aware of potential malfunctions of the equipment that require
adjustment or repair, and to be instructed to stop operation.

5. Hoist operators shall be trained in proper rigging procedures for the attachment of load to the hoist hook

2

I . Installation Precaution

General Safety Precaution

The following environmental conditions may result in the possible causes of which
trouble.

！

Danger

● Low temperature below-10℃,
high temperature above 40℃
or humidity above 90% conditions.
※Cause malfunction of spare parts

● In the rain or snow

● In heavy acid or salty conditions

※Cause rust or short circuit
※Cause malfunction of spare parts

● In an organic chemistry or explosive

power conditions.

※Cause explosion

● In a heavy general powder conditions

※Cause malfunction of performances

Power Cut-Off Switch ( option )Precaution

1. It will be available to equip with a devices of automatic power cut-ff switch which can be
installed below the hoist housing. It alerts Red and cuts off the power if over-load or
abnormal matter found , please stop the operation immediately for further checking.

2. If it alerts Red and cuts off the power during operating, lower the load, remove the load
and stop the operation immediately for further checking. Please reset the switch by hand,

3. The hoist is equipped with an up and down mechanical torque limit device, it activates
when over-riding or reversing operation found. It does not allow to activate for more than 6
seconds, otherwise it may damage the hoist endurance.

3