COMEUP Baby Winch User Manual

Baby Winch

Limited One (1) Year Warranty Statement

COMEUP Industries Inc. ( ) warrants to the original purchaser that the mechanical

components and electrical components of the Baby Winch will be free of defects in material

and workmanship for one (1) year. All mounting kits and other accessories carry one (1)

year limited warranty against defects in material workmanship.

This Warranty applies only to the original purchaser of the winch. To obtain any warranty service,

the Purchaser under this Limited Warranty is requested to report or his authorized distributors

of any claims. The Purchaser must provide a copy of the proof of purchase bearing the winch serial

number, date of purchase, owners name, email, or Tel & Fax address, vehicle details and registration

number. Any product determines to be defective will be repaired or replaced at

sole discretion without charge to Buyer upon Buyer’s compliance with these procedures. Seller or its

Authorized Distributors may make reasonable charges for parts and labour for repairs not covered by

this Limited Warranty.

takes the responsibility for all parts and components to be free from defects in materials

and workmanship, but the following are hereby excluded and disclaimed:

(1). All warranties of wire rope assemblies after initial use.

(2). All warranties of fitness for a particular purpose.

(3). All warranties of the product’s finish.

(4). All warranties of merchantability

The Limited Warranty does not cover any failure that results from improper installation, operation

or the Purchaser’s modification in design. reserves the right to change Product design

without notice. In situations in which has changed a product design, shall have

no obligation to upgrade or otherwise modify previously manufactured products.

1

Baby Winch

Thank you for purchasing a Winch. This manual covers operation and maintenance of

the winch. All information in this publication is based on the latest production information available at

the time of printing.

General Safety Precautions

The winch has been designed to give safe and dependable service if operated according to the

instructions. Please read and understand this manual before installation and operation of the winch.

Follow these general safety precautions:

Confirm that the winch complies with the using conditions.

Keep the winch secure strongly and the rope is not wound to be deviated to the drum.

Don't use unsuitable pulleys or accessories concerned.

Don't use unsuitable rope in construction, strength or having any defects.

Pay attention to the grounding, it provides a path of least resistance for electric current to

reduce the risk of shock.

Check the winch for smooth operation without load before loading operation.

Make sure the wire rope to be wound evenly in the first layer on the drum, rewind it if a mixed

windings in existence.

If a wire rope is found an uneven winding or accumulated at one side of the drum, align it

adequately.

WARNING

！

1. The winch is not to be used to life, support or otherwise transport personnel.

2. A minimum of five (5) wraps of rope around the drum is necessary to support the load rated.

3. The owner and/or the operator shall have an understanding of these operating instructions and the
warning before operating the electrical winch. Failure to follow these warnings may result in loss of
load, damage to the winch, property damage, personal, or fatal injury.

4. The owner shall retain this manual for further reference to important warnings, installation, operating
and maintenance instructions.

2

I . Installation Precaution

Environmental Precaution

The following environmental conditions may result in the possible causes of winch
trouble.

！

WARNING

● Low temperature below -10℃, high
temperature above 40℃ or humidity above
90% conditions.

※Cause malfunction of spare parts

● In heavy acid or salty conditions.

● In the rain or snow condition.

● In an organic chemistry or explosive power

conditions.

※Cause explosion

● In a heavy general powder conditions.

※Cause malfunction of spare parts
※Cause rust or short circuit

※Cause malfunction of performances

3

Winch Assembly

Hanger

Winch body

Power

Brush Holder

Reverse winding

limit lever

Over-winding

limit lever

Weight Hook

Wire rope

receptacle

Switch
receptacle

Switch

connector

Power

connector

Power plug

Pendant Switch

(Option )

Mounting

The winch designed to be hanged or mounted on a firm or stable bar or a bracket CRH-0710
(as an option). The rated lifting capacity for CRH-0710 is limited at 250 kg, so it can’t be mounted
for CWS-300. When hanging, do not allow the body or load to be caught by any construction
of frame, or other obstruction. Be sure to lock the hanger for extra safety.

Plug insertion

● Power lead insertion:
Insert the power plug into the power receptacle of the winch,
and clockwise tighten it by turning the locking ring.
Be sure to lock the lead by a holder. Do not allow it to be
caught by wire rope, drum or other obstacle.

● Cords Section:
The length of power cord is subject to the distance of 20 meter, for any other cases, please
use a bigger section cord such as 2.0 mm or 3.5 mm or a magnetic switch equipped to
prevent a considerable voltage drop to be happened.

4