With the ECO2 project Comenda has made
significant progress in limiting consumption
in three important areas – water, energy
and detergent – by implementing a series
of advanced technologies with a focus on
sustainability that translates into respect for
the environment and respect for people.
heat recovery unit
Built to supply the machine with cold water,
preheat it to 45/50 °C exploiting the heat
and steam that would otherwise be
dispersed in the air with significant energy
savings. It also condenses machine steam
and reduces the temperature of air
emissions.
heat pump
Exploits the heat produced during a cooling
cycle to heat rinse water, also due to the
upper exhaust conduit. This system lets the
machine run with cold water with significant
energy savings (from 15 to 25 kW/hour
according to the model). Emitted heat and
steam are simultaneously cooled to further
improve work room conditions.
RCD Rinse Control Device
Guarantees an excellent rinse even with
low pressure water flow. RCD complies
with severe backflow prevention specified
by WRAS and DVGW.
plus
steam condenser
System avoids that warm humid air
exits the machine by condensing it with
a cold water battery.
autotimer
Stops the pumps when the machine is idle,
automatically restarting when the machine
is reloaded.
detrempe module
with removable filter: prevents food
residue accumulation in the pre-wash area
double skin execution
Improves energy savings and contributes
in reducing sound and heat dispersion
in the work room.
ecorinse
With this system, final rinse water is
reused for pre-wash cycles providing
significant water savings (from 90 to 180
litres/hour according to the model) but
also energy and rinse-aid savings.
economizer
The rinse area is equipped with a water
and energy savings device.
hygiene
All structural and system components
in the Linea ACS are installed outside the
wash tank, leaving only smooth surfaces
inside to prevent any soil build-up. The
wide filtering surfaces and deep-drawn
tanks with rounded corners make
inspection easy and prevent dirt from
accumulating. The self-draining wash
pumps are also self-cleaning. This way
clean water is used to completely wash
the machine and remove all residue. Flux
Control® ensures that the quantity of
rinse water provides excellent results
and maximum hygiene. It also signals
low water levels or waste during the rinse
cycle. The Sanitizing System® can also
be included. In each wash and rinse area,
powerful jets of water with the addition
of specific sanitizers are aimed at the
internal surfaces by adjustable nozzles
to guarantee maximum hygiene at the
end of each cycle. The entire system
is easily accessible.