Comelit SDVR040A, SDVR080A, SDVR160A Operation Manual
0
4-8-16 INPUTS H264 STAND-ALONE
DIGITAL VIDEO RECORDER
ART. SDVR040A
SDVR080A
SDVR160A
Please read this manual thoroughly before use and keep it for future reference
1
Contents
Chapter One Product Description ............................................................................................................ 2
1.1 General Description .................................................................................................................. 2
1.2 Technical Parameters ................................................................................................................. 2
1.3 Open Case And Connect Cable……………….……...................................................................3
1.3.1 Open case inspection ………...................................................................................................3
1.3.2 HDD Installation......................................................................................................................3
Chapter Two Structure Appearance Description ...................................................................................... 4
2.1 Panel Description ...................................................................................................................... 4
2.2 Product Interface Description .................................................................................................... 6
2.3 Remote Control Description ...................................................................................................... 7
Chapter Three Description for Operation System ................................................................................... 8
3.1 Turn ON / OFF .......................................................................................................................... 8
3.2 Preview...................................................................................................................................... 8
3.3 Menu operation instructions ...................................................................................................... 8
3.3.1 Menu ............................................................................................................................ 8
3.3.2 Menu Composition ...................................................................................................... 8
3.3.3 ESC menu .................................................................................................................... 9
3.4 Main Menu Introduction ........................................................................................................... 9
3.5 Video Playback .......................................................................................................................... 9
3.5.1 Video Search .......................................................................................................................... 9
3.5.2 Playback toolbar ................................................................................................................... 10
3.6 Manual Record ........................................................................................................................ 10
3.7 PTZ Control ............................................................................................................................ 11
3.8 Setup ....................................................................................................................................... 11
3.8.1 Video Playback ............................................................................................................ 11
3.8.2 Video Backup ............................................................................................................... 12
3.8.3 System Setup .............................................................................................................. 12
3.8.3.1 General Setup.....................................................................................................13
3.8.3.2 Encode Setup .................................................................................................... 13
3.8.3.3 Record Setup .................................................................................................... 14
3.8.3.4 Network Setup .................................................................................................. 15
3.8.3.5 Screen Setup ..................................................................................................... 16
3.8.3.6 Video Detection ................................................................................................ 17
3.8.3.7 PTZ Setup ......................................................................................................... 18
3.8.3.8 Sensor Setup ..................................................................................................... 18
3.8.4 System Tools ................................................................................................................. 19
3.8.4.1 User Management ............................................................................................. 19
3.8.4.2 HDD Management ............................................................................................ 20
3.8.4.3 System Maintencance ....................................................................................... 20
3.8.4.4 Factory Setting.................................................................................................. 21
3.9 System Info .............................................................................................................................. 21
3.9.1 HDD Info ..................................................................................................................... 21
3.9.2 System Version ............................................................................................................ 22
2
3.9.3 System Log .................................................................................................................. 22
3.10 System Logout ....................................................................................................................... 22
ESEE user manual ……………..............................................................................................23
Chapter one Product Description
1.1
General Description
This equipment is designed specifically for the field of a number of digital security surveillance
products, which uses an Embedded Processor Init (MPU) and operating systems, combined with the
field of the latest IT technologies, such as video and audio encode/decode, high-capacity hard disk
recorder, TCP / IP network technology, code in FLASH, making system operation more stable. This
equipment, with digital video and audio recorder (DVR) and digital video and audio server (DVS)
features at the same time, can works not only in local independently, but also be networked to form a
powerful security monitoring network. It applies to bank, telecommunications, electric power, justice,
transportation, residential area, factory, warehouses, water conservancy facilities and other areas and
departments of the safety precautions
1.2
Technical Parameters
Model 4 channels DVR 8 channels DVR 16 channels DVR
Operation
system
Embedded Linux operation system
System resource 4/8/16ch 960H real-time video and network-wide transmission
Operation
interface
Graphical user interface (GUI), mouse, front button, remote control operation
Video standard PAL, NTSC
Image
compression
H.264
Audio
compression
ADPCM
Recoding mode Manual, timing, alarm, motion detection
Video Search Time search, event search, channel search, log search
Backup network backup, USB backup
Video input 4 BNC 8 BNC 16 BNC
Video output 1 BNC, 1 VGA, HDMI 1 BNC, 1 VGA, HDMI 1 BNC, 1 VGA, HDMI
Audio input 2 channels 2 channels 16 channels
Audio output 1 channel 1 channel 1 channel
Motion
Detection
each channel of the detection area (16 x 16), multi-level sensitivity can be set
Image display 1, 4 1, 4, 9 1, 4, 9, 16
Video Speed PAL: 25 frames / sec (adjustable) ; NTSC: 30 frames / sec (adjustable)
Video Save hard drive, network
Local playback 4 ch 960H 8 ch 960H 16ch 960H
3
Alarm Input 4 ch 4 ch 4 ch
Alarm Output 1ch 1ch 1ch
PTZ RS485
HardDisk
Interface
1 SATA 2 SATA 2 SATA
Network
interface
RJ45 10M/100M self-adaptive Ethernet
USB Interface 2USB2.0 high-speed interface
Power 12 VDC
1.3
Open Case And Connect Cables
1.3.1 Open-case inspection
First of all, please check if there is apparent damage of the packing as soon as you received the
products. The material can protect from the damage very well in the transportation.
Secondly, take out the product, take away the protection film from the DVR to check if there is
damage.
Thirdly, open case, check if there is any loose of data cable of front panel, power cable, connection
between fan power and mother board
1. Front panel and rear panel
There are instructions of how to use keys on the front panel and the interfaces on rear panel
please check the model no. with the one you ordered.
As for the labels on the panel, please take good care of them, which is very important to our after-sale
service.
You need to offer the model no. and serial no. during the after-sale service.
2.After open case, need to check
Besides checking obvious damage, also need to check if there is any loose of front panel data
cable, connect between power and mother board
1.3.2 HDD Installation
Make sure to install the HDD when you first use it.
4
Chapter Two: Structure Appearance Description
2.1
Panel Description
1. POWER led 9. PTZ: PTZ key
2. 1 ~ 4: CH1 ~ CH4 Single-Screen keys 10. ESC: Exit key
3. QUAD key 11. MENU: Menu key
4. State led, reserved 12. ▲▼◄►: Direction key
5. HDD led 13. : Confirm key
6. FN Switch 14. IR receiver
7. PLAY: Playback key 15. N.C.
8. REC: Manual recording key
5
1. HDD led 9. PLAY: Playback key
2. State led, reserved 10. ESC: Exit key
3. 1 ~ 8: CH1 ~ CH8 Single-Screen keys 11. MENU: Menu key
4. ▲▼◄►: Direction key 12. : Confirm key
5. POWER led 13. N.C.
6. IR receiver
7. QUAD key
8. REC: Manual recording key
1. POWER led 9. ESC: Exit key
2. HDD led 10. MENU: Menu key
3. REC: Manual recording key 11. ▲▼◄►: Direction key, : Confirm key
4. FN key 12. N.C.
5. PLAY: Playback key
6. ON/OFF key
7. Multi-Screen key
8. Single-Screen keys
6
2.2
Product Interface Description
4 channels DVR Rear Panel
1. VIDEO IN: CH1 – CH4 video input 2. OUT V: analog video output
3. OUT A: audio output 4. AUDIO IN 1-2: audio input
5. VGA: VGA video output 6. ALARM: alarm input / output
7. POWER key 8. HDMI: HDMI video output
9. NET: RJ45 network interface 10. USB interface
11. RS485 12. DC12V power supply
8 channels DVR Rear Panel
1. VIDEO IN: CH1 – CH8 video input 2. OUT V: analog video output
3. OUT A: audio output 4. AUDIO IN 1-2: audio inputs
5. ALARM: alarm input / output 6. POWER key
7. HDMI: HDMI video output 8. NET: RJ45 network interface
9. USB interface 10. RS485
11. DC12V power supply 12. VGA: VGA video output
16 channels DVR Rear Panel
1. VIDEO IN: CH1 – CH16 video input 2. AUDIO IN 1-16: audio input
3. Video OUT: analog video output
5. Audio OUT: audio output
7
7. POWER key 8. ALARM: alarm input / output
9. HDMI: HDMI video output 10. VGA: VGA video output
11. NET: RJ45 network interface 12. USB interface
13. RS485 14. DC12V power supply
15. Fan
2.3
Remote Control Description
POWER Power switch
DEV Device button: after press" DEV", input the same number as device number
and press “ENTER” to save the setting. Then DVR can operated by remote
0-9 Number button
MENU Menu button; eliminate all the areas when set up motion detection area
ESC Exit
▲ In menu mode: upwards; in PTZ mode: control the PTZ camera revolve
upwards
▼ In menu mode: downwards; in PTZ mode: control the PTZ camera revolve
downwards
In menu mode: left; in PTZ mode: control the PTZ camera revolve left
In menu mode: right; in PTZ mode: control the PTZ camera revolve right
ENTER Select key
PLAY Video playback
FN Subsidiary key
REC Recording key
VIEW Multi-screen key
Fast rewind key
Fast Forward key
Pause key
Note: If many devices in same place, remote control should select a device according to device number.
So each device needs a unique device number, unless remote control may effect to multi-devices with
8
the same number.
Chapter Three: Description of Operation System
3.1
Turn ON / OFF
Confirm that AC voltage accessible matches with DVR. Ensure that the DVR power outlet connect
with a good middle ground grounding. After switching power, the device started, 【POWER】 light is
on. Turn into system, if the panel status light flashing, it's normal conditions.
3.2
Preview
After device start, preview interface can be seen immediately. In the preview interface you can see the
system date, time, channel name. Press corresponding number key of panel or click the left mouse
button, user can preview the single channel. Press "QUAD" key in the panel or click the left mouse
button, to return to a multi-interface monitoring state.
3.3
Menu operation instructions
3.3.1 Menu
【MENU】,enter the device's main menu interface. 【PLAY】 shortcut keys for playback interface.
【REC】shortcut keys for manual recording.【PTZ】shortcut keys for PTZ control.
Note: Default password is empty, click "enter" can into menu directly.
3.3.2 Menu composition
Menu component units as following:
（1） Check box: two kinds of status available, "√" means valid, "□" means invalid , direction key:
【↑】【↓】【←】【--->】,enter key【 】. Also, click the left mouse button to choose.
For example: "channel" and "video mode" check box in the video research.
（2） Selection box: select the target content according to the drop-down box options. Use
【↑】, 【↓】 key or click the left mouse button to select.
For example: "channel" and "code stream" in the encode setup menu
（3） List Box: Displays the research information in the list, you can try one option for operation
For example: Press【 】 button in the video backup file. or the left mouse button.
（4）Edit box: Enter the name into edit box
For example: in the setup menu, you could input numbers, English letters, punctuation and so
on in the "channel" edit box.
a) use panel key 【↑】【↓】【←】, 【→】or move the mouse to edit box , press " " key
or click the left mouse button, then enter keyboard appears, select the desired input target
characters through the arrow keys or click the left mouse button.
Loading...