Comdial DigiTech 7700S, GCA70-184 User Manual
Digital Telephone
System
LCD Speakerphone
Station User’s
Guide
This user’s guide applies to the following
telephone models (when usad on
Comdial Gxxxx common equipment with
lxxxx or Sxxxx software cartridge
Rev. 11 A and later):
7700S-M Rev. I and later
If you need more information,
consult your v
Digi’Tech Station User’s Guide
Introduction
GCA70-184
Congratulations and thank you for using a DigiTech telephonel Once you have seen all of the
options and benefits that your new telephone offers, you will wonder how you ever did your
job without it. This manual serves as a helpful guide for using all of the various functions of
your new telephone and as a quick reference guide as well.
If you should need more
information about a particular function or on a function that is not listed in this guide, consult
the w, GCA 70-220, (your system attendant or whoever runs your main
telephone system should have several copies).
With the LCD version of the DigiTech telephone, the programming and operations are slightly
easier and quicker to use than with the non-LCD version. The steps in operating and
programming for the non-LCD version, however, will still work on the LCD telephone (see GCA
70-220).
DigiTech 7700s LCD Speakerphone
AUXllkY~
Jack
lnterocthe Buttons
(NOT progrommoble)
MUt0
3
Eiutton
Hold Button
/
Microphone Opening
/”
2
Next to A Line
Button
Next to A Direct
v
Station
Select (DSS)/
Busy Lamp
Field (BLF) Button
Next to A Fixed
Faature
or Programmable
Feature Button
Above the
ITCM
Understanding the Lights on Your Telephone
Flashing
Red
tine is
idle
tine is in
Line is in
use at your use at
station another
station
Line is
ringing
Your Line i Line has Line has
ringing recalled recalled
and will ba from hold
from hold
answered at your
at another
when you station station
$;tion i
Station is
in uss
or in do
not
disturb
The
feature
is off
The feature
is on
Your
intercom
is idle ’
Station is
receiving a
call or is
catting you
Station-tostation
messaging
has been
set
Another
station is
calling you
Auto redia
is in usa
or
System is
in night
mode
above 10
Line is on tine is
hold at on hold
your at
station another
station
An LCD You are usin
message your interwr
has been
saton
your
telephom
Understanding the Lights on Your Telephone
-cont-
Steady Steedy Steady
Flashing
off Green Red
Red
Flashing Fluttering Fluttering Winking
Orange Green Red
Winking Steady
Green Red
Red wl
I
quick flash
Above the HOLD
Button
Message
waiting has
been set
Automatic
station
relocation
has been
set
Above the MUTE
Button
Mute is Called
deactivated
party
cannot
hear you
Above the
SPEAKER
Button
Steady Red With Telephone Steady Red with Telephone
On Hook and Busy On Hook and Idle
Steady Red with telephone
Off Hook and Busy
Speakerphme mode active Background Music on
Group Listen is active
GCA70-184
Using the Speakerphone
DigEech Station User’s Guide
l
Your telephone is a speakerphone, and it can be used for
any operation in which the handset can be used by
pressing the SPKR button instead of lifting the handset.
You cannot use the speaker to receive a SOHVA or to
originate paging.
Answering Calls
l
To answer a call that is ringing at your telephone,
1.
if the light is flashing orange, lift handset;
2. if the light is red, press the flashing line and lift handset.
l
To answer a call using the speakerphone,
press flashing line or ITCM button.
l
To answer a call that is ringing at any telephone,
1.
lift handset,
2. press ITCY and dial * 4 plus extension number of ringing telephone.
l
To answer a call that is ringing at a particular telephone
in your group,
1.
hear ringing
2. lii handset,
3. press ITCM and dial # 4 (ringing station must be programmed in
your call pi&up group).
l
To answer a call that is ringing the loud ringer or night
transfer station,
1. hear ringing ,
2.
lift handset,
3. press fTCM and dial 80,
4.
answer call.
Loading...