Comdial Executech XE System Service Manual rev P
Personal Ring Tones =
ITCM *t4
STATION SPEED DIAL RECORD
+l (Tonel)
+ 2 (Tone 2)
+ 3 (Tone 3)
+ 4 (Tone 4)
2
3
Auto Dials
1. Press
2. Press Auto dial softkey. ‘
3. Select line or ITCM choice (optional).
4. Dial number to be stored (up to 15 digits).
5a.
5b.
6. Log all stored numbers on back of this user
NOTE:
Press
Press
guide.
lTCMt+kl.
Digits O-9 can be stored
l
l
Hookflash can be stored by pressing TAP.
l
Intercom can be stored by pressing ITCM.
l
Pause can be stored by pressing HOLD.
T/C
and repeat steps 2-4.
-or-
SPKR
to quit.
Station Speed Dial
1. Press
2. Press a softkey keypad digit (0 through 9).
3. Repeat steps 3 through
ITCM +k +k 2.
6 as detailed above
(Auto Dials).
DSS
1.
Press
ITCM % +# 3.
2. Press softkey.
3 Dial extension.
4. Repeat 2 and 3 as required
5
Press
SPKR
to quit.
4
6
7
8
9
AUTO DIAL RECORD
010
O/O
0 0
0 0
0 0
0
O1O
ExecuTech
Model XE/XL Key
System
0
User’s Guide
AUTO REDIAL KEY
1.
Press
lTCM+k-%l.
2. Press desired softkey.
3.
Press #.
4.
Press
SPKR
to quit.
COMDIAL
Charlottesville, Virginia 22906-7266
1 (804) 978-2200
Printed in U.S.A. GCA 70-11;;;
Standard
e Lift handset.
l
Press flashing LINE or ITCM key
l
Talk.
Speakerphone
l
Press flashing LINE or ITCM key.
l
Talk.
‘
Station ~11th Ringing Line Preference
With calls ringing at this station,
. Lift handset.
. Talk.
Call Pickup - Direct
- ITCM.
. ++4.
. Station number (of ringing station).
Call Pickup - System
l
ITCM.
e #4.
l
Press DSS (or Press ITCM and dial station
number).
l
Make announcement.
Station Speed Dial
While station is idle,
l
Press keypad digit 0 - 9 (see Number Record
on back of this page).
Sysfem Speed Dial
While station is idle,
l
Press ?K and two digit memory location (see
attendant for list).
Last Number Redial
While station is idle,
l
Press #.
Auto Redial
While station is idle,
l
Press assigned Auto Redial key (refer to
programming instructions on back of this
page).
To drop one conferee and remain active with other
conferee,
l
Press HOLD. Both lines placed on hold.
l
Press LINE key of party to be dropped.
l
Press and release hookswitch.
l
Press LINE key of party to be retained.
l
Resume conversation.
Add-on conference (1 external party, 2 internal
parties)
l
Establish outside call.
l
Press ITCM (outside call placed on hold
automatically).
0 Dial extension number of intercom party.
l
Waif for answer.
0 Press T/C (a three-way connection is estab-
lished) .
Set
l
While on line, press HOLD (regular HOLD).
. While on line, press HOLD + HOLD (exclusive
HOLD).
Retrieve
l
Press flashing held LINE key.
Standard
l
Lift handset.
l
Select LINE or ITCM key.
l
Dial number or press auto dial key.
l
Talk.
Speakerphone
. Press LINE or ITCM key.
l
Dial number or press auto dial key.
l
Talk.
NOTE: Selecting Autodial/Speed Dial/or DSS
eliminates need for: select LINE or ITCM + dial no..
Voice Announce
l
Lift handset.
Transferring Line Call
. Press T/C.
Press DSS (or dial intercom party station num-
l
ber).
When intercom party answers,
l
Announce call and line number.
l
Hang up handset (or speaker off).
Conferencing
Multiline conference (2 external parties, 1 internal
w-04
To set up,
l
Establish.first outside call and press T/C.
l
Establish second outside call and press T/C.
Call Attendant = ITCM 0
Background Music = ITCM *l (ON) #l (OFF)
Voice Announce Blocked = ITCM *2 (ON) ti (OFF)
Call Pickup-Directed = ITCM +++4 + Ringing ext.
Call Pickup-System = ITCM #4
Zone 1 Paging = ITCM 4
Zone 2 Paging = ITCM 5
Zone 3 Paging = ITCM 6
All Call Paging
= ITCU 7
Loading...