Comdial DXP System Attendent Supplement User Manual
Personal Speed Dials
1. PresslTCM+#%i.
2. Press a programmable button (memory code
location).
3. Select line button or dial line group 01 - 16.
4. Dial number to be stored (up to 16 digits).
l
Digits O-9, +, # can be stored.
l
tdookflash can be stored by pressing TAP.
l
Pause can be stored by pressing HOLD.
5. Press TRANSCONF and repeat steps 2-4 to
program another autodial button, or press
MNTR (SPKR) to quit.
6. Log secondary stored numbers in directory.
Personal Speed Dial Numbers
(Upper Button Groupin&
COMDIAL
DSS and Fea tore Codes
1. Press ITCM G# X 3.
2. Press programmable button.
3 Dial extension or feature code
4. Repeat 2 and 3 as required.
5 Press MNTR (SPKR) to quit.
Response Messaging
1. Press ITCM * ?+ 6.
2, Press a programmable button.
3. Dial message location number (91-30).
4. Press #.
5. Press MNTR (SPKR) to quit.
Personal Speed Dial Number
(Keypad Buttons)
Personal Speed Dial Numbers
(Lower Button Grouping)
LCD Messaging
Line Group Access
4nswer Page
Message Waiting
Night Transfer
(Attendant Only)
Paging
Personal Ringing Tones Set ITCM c+c &4 (i-4)
Service Observing
Speed Dial
Redial
Line PidwpFrom Any
Station
EXClllSiVE HOLD, HOLD
Set
Group 1 ITCM 9
Set ITCM #? 3 Ext.
Cancel ITCM # 3 Ext.
OfI
Off lTCM.# OS032
All Call ITCM 70
Zone 3-R
CC3Wd ITCM # 03 Ext.
Station 1-o
System * 100-g 299
On #
Zone 1
Zone 2 ITCM 66
Zone 3 ITCM 67
ITCM #c 02 Message I
( ITCM 78
ITCM*# O&O31
ITCM 71.77
-, . .
ITCM 65
DXP Digital
Communications
Systems
Station User’s
Guide for
DigiTech Telephones
Charlottesville Vimin:- q-n--
Printed 70-l 97.02
266
.d
11191
Standard
l
Lift handset.
l
Press flashing line or ITCM button
l
Talk.
Speakerphone
l
Press flashing line or ITCM button.
l
Talk.
Station with Ringing Line Preference
With calls ringing at this station,
l
Lift handset.
l
Talk.
Call Pickup - Directed
l
Press ITCM * 4.
l
Dial station number (of ringing station).
Call Pickup - Group
l
Press ITCM # 4.
Standard
l
Lift handset.
l
Select line or ITCM button.
l
Dial number or press autodial button.
l
Talk.
Speakerphone
l
Press line or ITCM button.
l
Dial number or press autodial button,
l
Talk.
Voice Announce
l
Lift handset.
l
Press DSS (or press ITCM and dial station
number).
l
Make announcement.
Line Gro&~p Access
l
Lift handset.
l
Press
ITCM.
0 Diil Group Access Code:
9 = Group 1
81-89 = Groups 2-11
,* Dial telephone number.
Persona/ Speed Dial
While station is idle,
l
Press keypad digit 0 - 9 (see directory).
‘
System Speed Dial
While station is idle,
l
Press t and one, two, or three digits as
required by system programming (see attendant for system speed dial list).
Last Number Redial
While station is idle,
l
Press #.
Auto-Redial
While station is idle,
l
Press assigned auto-redial button.
$creened Transfer
l
Press TRANSKONF.
l
Press DSS (or press ITCM and dial station
number).
l
When intercom number party answers, an-
nounce call,
l
Hang up handset.
Unscreened Transfer
l
Press TRANWCONF.
l
Press DSS (or press ITCM and dial station
number).
. Hang up.
Multiline cmference (2 external parties,, 1 iinternal party)
To set up,
l
Establish first outside call and ,press
TRANSKONF.
l
Establish second outside call and press
TRANSICONF.
l
Talk.
Add-on conference (1 external party, 2 internal
parties)
l
Establish outside call.
l
Press TRANSKONF.
l
Dial personal intercom number of party or
press DSS.
l
Wait for answer.
l
Press TRANSKONF (a three-way connection is established).
Five -Party Conference (up to five parties-either
intercom numbers or lines)
To set up,
l
Establish first call.
l
Press TRANSKONF.
l
Establish second call.
l
Press TRANWCONF. Conference is active.
l
Repeat above steps for up to four parties plus
your station.
To remain active with one conferee,
l
Stay on line when one party hangs up.
To set,
l
While on line, press HOLD for regular HOLD.
l
While on line, press HOLD + HOLD for exclusive HOLD.
To retrieve, press flashing line button or TAP.
Hold Queuing
Place multiple calls on hold by pressing HOLD
after taking each call.
To retrieve,
l
Press line button or HOLD to scroll held calls
(on LCD display).
l
Press TAP to retrieve displayed call.
Cal Park
To set,
l
While on line,,
l
Press *.
. Select a parkroae
,pmss ITCM.
@l - 99).
To retrieve (from arry &on),
l
Press ITCM.
l
Press #.
l
Select a park zone ,(91 - 99).
Zone
To originate,
l
Lift handset.
l
Press ITCM + zone number (71, 72, 73, 74,
75,76,77).
l
Make announcement.
l
Stay on page (if waiting for answer back).
All-Call (If programmed)
To originate,
. Lift handset.
l
Press ITCM + 70.
l
Make announcement.
l
Stay on page (if waiting for answer back).
Meet-Me Page (Answerback of Page)
l
Lift handset (of nearest station).
l
Press ITCM + 78.
l
Talk.
External
l
Lift handset.
l
Dial assigned page access code.
-or-
* Press page button.
NOTE: External page is assigned to one of
the eight page zones.
GCA70-196 - 199
Loading...