Comcast Remote with Voice Control Start

Page 1
Remote with Voice Control
Start
Press and hold t he Setup button (about 3 seconds) until the St atus LED changes from red to green.
Press the XFINIT Y button.
Follow the on-screen instructions to enter the 3-digit code that appears.
XFINITY Remote is paired with the device.
A
B
C
TV Power
Status LED
All Power
Voice Control
Push and hol d to talk. Disco ver content by channel, p rogram or key wo rds.
XFINITY / Me nu
Access Guide , Saved, XFINI TY On Deman d, Apps, Sear ch and Setti ngs.
Number Keys
Use predic tive text ( T9) to quickly sea rch for content.
TV Input
Changes to th e next avail able input on your TV (i f programme d in Step 4).
Setup
Program r emote for Aim Any where or to control yo ur TV or audio de vice.
Pick up your remote and remove the “Pull” tab (on back) by pulling away from the remote. The St atus LED will blink green four times as the remote powers up (about 5 seconds).
Turn on your TV.
Turn on your set-top box.
A
B
C
Back
Pair Remote for “Aim Anywhere” Control
Meet Your Remote Turn On Your Remote
1 32
Control your se t-top box without having to point your rem ote at the device, even when it is locat ed inside a cabinet or entertainment center.
Your remote arrive s with the AA batter ies already inst alled, but not acti vated. Here is how to power it on f or the rst time.
Need to remo ve Aim Anywhe re control? Press and hold the Setup button on the remote until the status LED changes from red to green. Press A on the remote. If the status LED blinks green twice, you have successfully removed Aim Anywhere.
Not working? Make sure the battery tab from your remote is removed, your TV is on and you are entering the correct 3-digit code on your TV screen.
4
Page 2
Press and hold t he Voice button until you hear the audio ton e.
Speak a voice comm and to the remote while continuin g to hold down the button . Try one of the sugge stions below. The Status LED will b e solid blue while you speak your comman d.
Release the Voice button when yo ur command is complete . Look at the TV for the results o f your voice command.
Remote with Voice Control
Start
Using the list on th e right, nd the rst 5- digit code for your TV manu facturer.
Press and hold t he Setup button (about 3 seconds) until the St atus LED changes from red to green.
Enter the rst 5-di git code for your TV manufac turer. The Status LED should  ash
green twice.
Verify tha t the code was accepted by using your remote to adjus t volume and turn the TV on and o.
A
B
C
D
Not working? Try the second code listed. Still
not working? Visit xnity.com/voiceremote for a complete list of codes or use the My Account app for mobile (iOS/Android) or X1.
A
B
C
This equipment has been tested and found to comply with the limits f or a Class B digit al device, pur suant to part 15 of the FCC rule s. These limi ts are designe d to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radi ate radio freq uency energ y and, if not used in accordance with the instructi ons, may cause ha rmful interfe rence to radio communications.
There is no gu arantee that in terferen ce will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increas e or decrease th e separatio n between th e equipment and receiver.
• Connect the eq uipment into an ou tlet on a circuit dierent f rom that which t he receiver is co nnected.
• Consult the dealer or an experienced remote control /TV tec hnician for hel p.
• It is stron gly recommen ded that the T V be plugged into a separ ate wall outle t.
The user is cautioned that changes and modications made to this equipment without the approval of the manufacturer could void th e user’s auth ority to ope rate this equi pment.
This device complies with part 15 of the FCC rules. Operation is subject t o the followin g two conditio ns: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
“Caution” : Exposure to Radio Frequency Radiation. Antenna shall be mounted in such a manner to minimize the potential for human contact during operation to avoid the possibility of exceeding t he FCC radio fre quency exp osure limit .
Radio Exposure Statement: This equipment complies with the FCC radia tion exposure l imits set for th for devices operating in an uncontrolled environment. This equipment should be op erated with a mi nimum distanc e of 2 cm betwee n the radiator an d front of face. T his equipment should not b e placed direc tly on the ear wh en the speaker is active .
Control Your TV’s Power and Volume
4
Test Voice Control
5
Once your remote is paired with your set-top box, you can use v oice control.
FCC Compliance Statement
Not working? Make sure you’r e pressing the Voice butto n while you spea k into the remot e, and releas e it when comple te.
WATCH CNBC
FIND The Voice
SHOW ME all Eagles games
SHOW ME all kid s movies on HBO
RECORD The Biggest Lo ser
LAUNCH Pandora
GUIDE
WHAT SHOULD I WATCH?
WHAT’S ON NOW?
Need help ?
Visit xnity.com/voiceremote
Use the My Account ap p
for Mobile (iOS/Android) or X1
Keep for fu ture refere nce, but if you
decide to toss, please recycle.
Quick Star t Guide v.1.0
1698397C Printed i n China
If your code isn’ t listed or you would like to control an audio d evice, visit
xnity.com /voiceremote.
Popular Manufacturer Codes
LG 101 78, 1126 5
Panasonic 10051, 10250
Samsung 10812, 10 060
Sanyo 1015 4, 1015 9
Sony 10000, 11100
Sharp 1009 3, 10165
Toshiba 101 56, 11156
Vizio 1175 8, 1175 6
Loading...